Is this a known issue in Premiere Pro CC? I'm using version 7.2.1 (4).
The video clip in V1 has a reverse speed change applied, and the timecode filter is off by one frame. Or maybe the source overlay is off by one frame? Which should I trust?
I am working with a series of long movies and need to stitch them together and put timecode on them. I found that there is a limit for how many frames I can offset, which is 32,766. Is there a way to get rid of that limit?
View 3 Replies View Relatedis it possible to see Frames Numbers instead of Timecode Numbers in Timecode field of the Player or Source monitor?
It is easy to do in Effects Editor but I could not figure out how to change display from Timecode to Frame in Player..
I've been working the last 6 months with 4 GH2s and ran into some strange troubles when initially importing them to the timeline. 2 hour shots are divided into 6 or 7 different files, and when brought into PP the first clips audio was assigned to all the other remaining clips. This was pretty strange, but I fixed it by using TSmuxer. It was added time in the workflow/set up, but in the end I could produce;
The latest update of PPCC now combines the entire 2 hours of footage into each of the 7 files being imported. So it is importing 2 hours of footage 7 times for each camera. The conforming is taking forever! For 4 cameras it's conforming 14 hours of footage each, when it should literally be a 7th of that.
It is taking up large amounts of time and disk space.
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
i an having trouble accessing this function. I have CS6 (windows) and i can't access the 'speed/duration sliders' to slow down my clip to look like its in slow motion. I know this can be done
View 3 Replies View RelatedI have a jpeg sequence of 165 frames in my psd animation. Upon export (as an .mov file), I need to keep frames 1-29 and 80-165 as is, but speed up frames 30-79. How can achieve this in PS CS4?
I have tried exporting each of the clips individually and then brought them into i Movie to speed up the middle portion and subsequently re-piece them all together. This works great, but I am not familiar enough with i Movie or Premiere Pro to export the file properly; it seems to not allow me to export it with the same specs (mainly size, 1280x1024 at 30fps) as my source files.
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies View RelatedI want to film my CEO standing on London Bridge as people walk over it. The trick is is that I want to film him at normal speed (for obvious reasons), and i want the people walking past us to be shown at double the speed.
Having thought logically I guess I need to film people walking over the bridge separately from filming my CEO, then somehow superimpose him on the that footage.
I'm using Preimer Pro CC and I have a clip which is 1min long - I want the first 30sec to play at normal speed and the last 30sec at 200%. I can work out how to speed the whole clip up but not a portion of it.
View 2 Replies View RelatedI am trying to edit a video for a friend. He shot the video with his phone and it shows up sideways when it is imported to Premiere. Everything works fine till I rotate is 90 degrees. When I rotate it the bar on top becomes red. The audio and video still play perfectly fine though. When I render the video and it plays back, the audio stays the same, but the video speeds up by almost 10 seconds. Also, when I try to just start over with the clip and just reimport it, it will only let me add audio to the sequence. The video plays in the preview, but will not add to the sequence after telling it to render the first time. I have deleted the project, all prefrences for Premiere, and even did an uninstall and reinstalled it.
View 2 Replies View RelatedIn Adobe Premiere, I am getting an echo when I change an audio clip's speed/duration. The change is from 100% to 103%. I've tried other values in the speed duration but all create an echo.
View 1 Replies View RelatedI really want to be able to use the new Synchronize feature of PP (Clip > Synchronize), but I tried selecting two video clips (a video clip, and two audio tracks), and right-clicking, but the option to Synchronize is greyed out. If I select certain clips, then it appears, but I don't see what the pattern is. It seemingly picks random clips to not sync.
View 1 Replies View RelatedI've been working on a project that involves 45 separate clips. I have cut the unwanted stuff out of each clip - was a lot easier than I thought - just dragged the start and end point icons. So now I have 45 clips which just need joining together. When I shot all the footage and uploaded it to my computer the file I saved as Clip 1 may not be what I want to start the movie with. How do I go about shuffling the order of the clips and combining them all into one to form my movie - and when I join two clips together does Premiere Pro automatically join the sound.
View 1 Replies View Relatedaudio clips, usually less than 20 seconds, are now being cut off at the last few seconds of the clip. Can't figure out wny it is happening or how to correct it. If I select Edit, Play Original, I can hear the full clip.
View 1 Replies View RelatedI am completing a 52-minute program, with 20 short sequences shot in ProRes 422 (50 Mbps) and saved to MXF OP1a files. The package looks good when output to Blu-Ray, but I will need to output for broadcast, and the broadcaster prefers MXF deliberables. My Question: Is there any significant loss of quality by saving 20 MXF files (with dozens of ProRes clips) to a final MXF container?
View 7 Replies View RelatedIt's listed as a feature numerous times in the forums but I haven't been able to export cut down stock footage as individual clips.
View 3 Replies View RelatedI have multiple sequences that use clips from an interview that show diagonal lines through them in the timeline. Not all files from the interview have these diagonal lines. These problematic clips do not contain audio or video when the playhead is on them. They don't even have a thumbnail pic in the sequence while other shots from the interview do. How I can get these to work in the timeline again?
View 8 Replies View RelatedI'm working on a Premiere Pro CC project with another editor. On his latest version, some of the clips on the timeline have a "+/-" or "+2" or "-2" on them. He's not sure how that happened, and I've not seen it before. What do those mean, and how do I get rid of them? I've tried Googling, but search engines don't respond well to "+/-".
View 1 Replies View Relatedafter razor cutting a clip (and doing other steps after it): is it possible to join the clip again?
Or is it the only way to delete the first or the second clip and strech the other? But this would be a little circuitous.
Add Edit don´t cut all the layers highlighted. When I insert or overwrite a clip into the timeline, the timeline don´t respect the highlighted layers (ex. if layer 1, 2 and 3 were highlighted and the clip were put in layer 1, clips on second and third layer should be deleted between in and out markers, but they aren´t.
The Ctrl+D and Ctrl+Shift+D commands (add transition) doesn´t work like the other versions too (respecting where the cursor is)the buttons to go to the next cut on timeline (in my keyboard, A and S) doesn´t work right too.I would like to know if these are bugs or the new Premiere CC is different from the others before.
I have to make a couple of changes to a piece I edited 2 months ago on Premiere CC. When I open the file premiere lists out several clips that it says are missing. I've hit "locate" but nothing comes up.
View 3 Replies View RelatedI'm working on a doc and need to attach my transcript to the clips. Looks like I need to do it in the Adobe Script format.
Where I can get Adobe Script?
I'm a CC member and it's not in my CC Apps.
I have a synced three camera project that I have almost finished editing. I want to select the last video clip in my sequence and roll it back, while keeping the audio in place. The idea is to fade the picture to black while the synced audio continues as credits roll over black. However, I cannot find a way to select video only on the clips at the beginning and end of the sequence. I can select and separate any video clip in the middle of the sequence, but not the clips at the ends. I must be missing some keystroke. How do I do it?
I am noe to Premiere Pro and am using version CC.
Nothing happens when I try to move the clips to the timeline. Have Windows 8.1. Premiere Pro CC.
View 3 Replies View RelatedI have received a project edited on PPro 7.1.0 with a number of Canon C300 spanned clips. I have PPro 7.2.1. When I relink the clips the spanned clips link incorrectly. In fact all the span clips have incorrect timecode. The original editor on PPro 7.1.0 brought in the span clips as individual clips with sequential timecode. When I import the clips they come in as clips all of the same length but the time code is way off eg a clip that should start at 01:01:31:17 starts at 01:17:18:18. This is really less than satisfactory and the fact that we need to hand this project back and forth is really going to make life very difficult. Adobe and Canon need to sort this span clip thing out.
View 34 Replies View RelatedI am running a PC with Win7 & PPro CS6
I have a bunch of clips that were copied over from iMovie imports (no original files exist anymore)
They are all a special form of .mov
I can play them in VLC Media Player (but not Quicktime, or WMP) so I know that a pc can handle them...
When I import into CS6 I get an errorsaying Codec missing or unavailable...
Whered can I get the proper Codec?
Even though I've made sure that my sequence settings are exactly matching my clip settings (ProRes4444 or 422HQ) I'm getting a yellow bar over my sequence.
I'm working on a 2012 Mac Pro running OS 10.7.5. I downloaded Premiere Pro CC earlier today; I thought I'd play around with it to see how it compares to FCP7. Most of my NLE usage is very simple, just assembling sections of motion graphics and 3D animations rendered out of After Effects in the ProRes 4444 codec.
The "New Sequence from Clip" function isn't behaving as I'd expect. The comparable feature in FCP creates a sequence that matches all aspects of the selected clip (size, framerate, codec, etc.). The Premiere implementation appears to only match the sequence size and framerate to the selected clip.
If I create a new sequence from a ProRes clip, or tell the sequence to match the clip, I'd expect that clip to be sitting in my timeline with no bar of any color. But I get a yellow bar. When I go to Sequence Settings I see that the editing mode is Arri Camera, and the Video Preview is greyed out on an MPEG format. I have to go to Custom and manually select Quicktime, then specifiy the matching ProRes codec. Shouldn't those wrapper and codec settings be matched automatically too when I've specified that function?
That said, if I go in and manually match the codec settings to my clip I still get the yellow bar. If I select another sequence and click back on the new sequence the yellow bar is gone.
I'm assuming that this yellow bar issue is a display error of some sort, because if I export the sequence with "Match Sequence Settings" selected the export happens very quickly as I would expect with a Smart Render-compatible sequence.
I recorded video on a Black Magic Cinema Camera (BMCC), which has legendary video quality but an awful on-camera microphone with tinny recording process, and recorded audio on a Zoom H6 which has great low-noise, more bits and greater sampling rate capability.
In Premiere I made a Sequence containing the video footage, then added the H6 audio and synchronized it by waveform to the BMCC's audio, which I subsequently muted. I call this a Source-Sequence, as it is intended as a virtual source media item, to be cut into one or more Edit-Sequences (my term).
Not "holding my breath" but trying it anyway, in Premiere's Project/Bin pane, I selected that source-sequence then did RightClick > Analyze Content. Teasingly, that option was not greyed-out. However all options in the the resulting popup-dialog were greyed-out.
In this situation, to be useful, the speech analysis would need to be available to Sequences, not just to (Master) Clips. Obviously one could render such a sequence to intermediate but that would waste time and disk space and would essentially freeze the state of the Source (e.g. including any sync issues that might be discovered later, or whole-source color corrections issues etc.). If one subsequently altered that state, a re-render, re-link and re-analysis would be required. If a Souce-Sequence were used instead, and no alteration had been made to the audio (or if user indicated "don't care"), then there would in principle be no need for re-analysis.
Edited raw AVC/HD footage on Premiere Pro, but in preview and also when exported it flickers which it doesn't do on the original clip.
I've made 20 different sequences in this project without realising this issue! And I really want to avoid having to import all the clips again and re-edit.
Working on a 2011 MacBook Pro running cs6
I tried reimporting the video and translating it to another format, I've rendered it fully, and deleted temp files and re-rendered it. I rebuilt the video from scratch in a new sequence created from the clip (all clips were screencaptured using Camstudio so they're the same exact format as each other.
But I still have constant problems with videos not playing properly in preview. The last time I had this problem, they rendered that way too. When I hit the spacebar to view the video, it shows a bit of the video, then rewinds and plays the same section over and over, moving a little further forward each time. Basically "rubberbanding".
It's Premiere Pro CS 5.5.2
Win 7 64
No third party codecs.
I have plenty of hard drive space and 8 gb of ram. I do have browsers open which use a lot of memory, but all the other clips are working so that doesn't seem like it should be an issue.I'm not using any kinds of plugins or third-party things.
Shutting other memory hogging programs and restarting Premiere.Things that seem to hurt: using the time slider to increase or decrease speed of the video.