I am running out of hard drive space which is the source for importing my images into Lightroom 4.3. I have these images backed up on an external drive. I now want to use the external drive as my source of import. How do I do that. And then how to do I find the missing files in Lightroom?
View 4 RepliesWhen I try to import from a card, using either the slots in the computer or a card reader, I can select the source, but within 15 seconds or so the Source disappears and the middle window tells me to "Select a Source". I can do this over and over, source keeps disappearing. This is happening with different cards (so probably not a card issue), different card reader (so probably not a problem with the reader). Using Lightroom 4 on a Windows 7 operating system. Just started having this problem recently and have had LR4 for several months.
View 9 Replies View RelatedI have lightroom version 4.2 running on Windows 7.
When I import images, if I spend too long slecting the images I want to import from my memory card, the Import source is lost and all my selections are lost. It is driving me roudn the bend! Is there something I am missing?
I run 2 hard drives in my PC. One drive is for programs only. The second and larger is for photos/music. When I go to import the source pane ont he left will not recognize the B: drive, Only the C: drive and it will even recognize my M: drive with is my external. Im not sure what to do at this point to add the B: drive to the souce.
View 3 Replies View RelatedFirst, I'm using the new Lightroom v4.1 on a Windows 7 x64 system.
I'm trying (without success) to remove volumes from the list that's shown when a user clicks on the 'Import' button (lower left of screen) and 'Select a source' which, naturally, shows all the drives in my system.
There are five volumes; four internal and one external.
There are only two drives which contain photos that I'm interestered in importing/editing.
The other drives contain files that I have no interest in editing or organizing.
For example, several hundred (scanned and collected) very old family photos that I wish to keep pristine, with no editing of any kind. As for placing them in collections, I already have them in dated, carefully named folders.
So, as this is a shared computer, I want to remove the volumes (drives) so that the aforementioned photos can't be inadvertantly imported.
I had copied a .PNG file into the source folder and wanted to import it into the Lightroom catalog.
However the import dialog does not show that file in the source folder at all.
I also tried the method of selecting the source folder and using the "Synchronize" option. But that did not show the .PNG file either.
My clumsy work-around was to open the file in CS6 and save it as a .JPG file.
So my question: how can I tell Lightroom which file types (extensions) I want to be able to import?
I'm in the process of evaluating several video editing programs. So far I've used AVS Video Editor, Cyberlink Power Director and Adobe Premiere.With each program I've spent 30 minutes making a quick demo video to see how intuitive it is and how well it performs. Today I downloaded Corel Visual Studio and decided to give it a go.
I've run into a problem straight away.I've tried to import raw avi files.So I'm using the "Select Import Source Folders" screen.When I navigate to the folder containing the files the OK button is greyed out and won't work.It's greyed out all of the time.
Is it possible to have Lightroom rename the source images according to my custom naming convention?
I just imported 278 photos and they are all correctly renamed within Lightroom however the source files retained the original Canon generated names. I want to rename them for backup/in case I ever decide to stop using Lightroom/etc.
Whenever I import photos the exposure and other settings are changed. I have resete every default setting I can find for any kind of preset.I tried to uninstall by dragging to the trash can (Mac OS) and reinstalled to try and clear the issue. Not sure this was the correct process as it didn't seem to wipe everything out. Don't know what setting got changed along the way. Just trying to get everything back to default so that my photos aren't arent manipulated before I can even get them to the develop module.
View 2 Replies View RelatedI originally did an existing surface that I was not really satisfied with. Then did an existing and proposed profile using the LandXML import/export option for getting the information from one file to another. I have since redone the existing surface to something I am more satisfied with, and set up data shortcuts, but I cannot figure out how to update the existing portion of my profile.
Essentially, I want to "unload" the previous surface information from LandXML and redirect the profile to the data shortcut information so the existing portion of the profile can be updated... preferably without disturbing the proposed portion of the profile.
There is a dialog box that lists information about the profile, but it does not want to let me modify or change anything.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I just imported several photos into my catalog using a preset metadata import. After Import I edited all the photos and then was set to export. Unfortunately it was the wrong metadata preset and I want to change it on all my photos. Is there a way that I havent been able to find yet that would allow me to easily change over the metadata copyright info on all the photos without having to start all over again?
View 2 Replies View RelatedI have a problem with importing pictures from my Leica to LR3.
If the pic's are shot in black and white with the Leica preset, LR3 is changing them into colour images immediately after the import.The pic's are shot in RAW
I have a unique challenge. I use my personal laptop for my CAD work at work. We are now setup with Vault 2012 and Inventor 2012 and we are setup to pull our Templates, standard files and content center parts from the vault.
I have become so busy that I would like to do some of my work at home on evenings and weekends. Other than the obvious problems of having no life and working for nothing, I am having the problem of not being able to access templates or CC parts at home. I can store the CC and templates on my C drive but am not sure where to set Inventor to point to the files on my drive or if there is an easy to do so depending on where I am.
I am having trouble changing the paper source from one cassette to another when printing from Phososhop Elements 6.0 to my Epson XP-600. I am using a Mac and I can change the paper source when using iPhoto so it must be the PS software. Both Epson and Apple agree it must be the PS software.
View 6 Replies View RelatedI have a vertically rectangular frame with internal frame elements at two separate levels based off offset work planes.
The lowest internal plane is offset up from the XZ plane and the highest internal plane is offset up from that lower plane. In hindsight I should have based that second plane also off of XZ, or off the height extents plane at the top of the rectangular box.
So that top third section of the box CAN be sized with a little math, but if I change the lower 2/3 of the rectangle it's going to want to follow that lowest internal plane (which I can tweak again to get what I want)...is there a way to just change the source of that higher internal planes source plane? Like switching it to XZ or the height extents?
I select an audio clip in timeline to open it in Source Window.
I try to change the IN POINT from inside the Source Window and I crash. Every time.
Then I click CONTINUE and get this:
I am running PPCC 7.2.2 (4) on a MacPro with 10.8.5 installed.
It was in Feb - March 2012. I was then using AutoCAD Civil 3D 2012. I had faced a problem of getting ground data for a large surface by using satellite imageries processed by some government wing of USA (NASA?), have lost track of it.
View 6 Replies View RelatedI am currently using a Nikon D7100 and recording my photos in the Raw/NEF-RAW format. Recently, whenever I am uploading my photos to Lightroom 5, my photos are changing to .dng files rather than staying in the NEF file. When I go and look back at my previous imports from the past few times, they are in NEF and NOT in .dng. Why is this doing this and how do I turn this feature off so that my files remain the same going from my camera to my computer through importation.
View 1 Replies View RelatedMy main hdd was about to crash. i bought a new ssd drive. it isnt big enough to fit original os, programs and images. So I moved images from main hdd to an external hdd. I moved catalog to a new primary hdd with a fresh install. When I load the catalog, the images are missing. When I select locate and find target files, I think it's importing them back to the main hdd. Does it move the file or just change where it's pointing to the file. If it moves the file then I will run out of space again and defeat the purpose!!
View 3 Replies View RelatedI need to copy a layer from one drawing to another, the problem is that one of them is in model and the other one is in paper. The method I tried using was: I used the q select command to copy all objects from one layer on to the clipboard and then tried pasting it in the other drawing (which was in paper) - and nothing got pasted.
View 3 Replies View RelatedI don't remember it being a problem in LR4, but I have just used the spot tool on an image where there was a crop. The program's choice of source for the spot tool seems to me to be more dramatic than ever before, and in this particular image the source selected was in the area which I had cropped out. To move the source point, I had to open the crop tool to adjust one side of the crop, then move the source, then restore the crop to the image, then reselect the spot tool.
It might well be that in some instances the cropped out area is the best source, but whether it is or not, I think we need to be able to access the cropped detail without resetting the crop itself and preferably without having to then reselect the spot tool.
I recently discovered a 'change' to my 'Source Panel' window when I try to Import new files from my CF cards. I have 4.2 installed. All that is available on the left hand side of this window is the 'Other Source' pull down box and never any file source like my hard drives or CF cards or anything that used to be there prior to about a month ago. I reinstalled this program twice without any changes. Have I shut something off by accident? My buddy has the same program and he cannot find any reason my should be any different than his but it is.
View 1 Replies View Relatedi am new to LR with LR4 upgraded to LR4.1. I can import images from my hard drive photo folders but LR won't let me reorder them. I get the message "The currently selected source does not support custom order". Why is this? I find it strange that such a sophisticated product as LR doesn't allow the user to move images around within a folder, especially when it can be done easily in Bridge.
View 2 Replies View RelatedI have a system of labeling my images to differentiate between the source files and the final edit images, but sometimes I need to apply different labels if there is something that's not ordinary to my process. My problem is that when I go back through my archive to look for something, I forget why I lebeled something a different color. I've been creating JPG's in Photoshop with notes for that specific job, but that's getting to be a pain.
It would be great to be able to create a note within Lightroom that I can view while I'm thumbing through my images.
My source files were a mess, so I went in and roughly organized them, creating folders and grouping them by type. I figured I could just re-link the offline files back in LR.
In Lightroom, I right-clicked on my root photo folder and chose "Syncronize Folder" - what I didn't realize is that it seems to have deleted what I had and reimported it again. So my problem is that all my Lightroom edits on these files are now gone. All I have are raw, untouched pics.
I backup regularly. Is there a way to restore my edits? All the underlying filenames are the same.
when I try to print I get this message "There is one photo in this print job which is missing its source file" I've tried many photos, same message. I've already tried to reinstall (and update to 5.3) Lightroom.
View 4 Replies View RelatedWhen I try to swap a photo into a different order, an error message tells me that "The currently selected Source does not support custom order".
View 2 Replies View RelatedIn LR4, you clicked, held down, and dragged your cursor to select a custom target source point to sample from... Clearly with the big update to the Spot removal tool in LR5, this action has a different effect... So in order to mimic that old action, you have to hold down Command (Mac) while clicking and dragging to select from a custom source point.
This issue I'm having is that when doing this, the Clone/Heal option always defaults to clone. I would say that 90% of the time, I'd rather have it acting as a 'Heal' instead. Having to then go and click 'Heal' to update this fact on every single spot removal is highly time intensive to say the least, when you are editing thousands of images, in my case, at a time.
Am I missing something, or is it possible to change this Default to 'Heal' instead of clone? I like that LR4 would leave the Clone/Heal option wherever you last set it, and you had to manually change it in order to use it differently.
German shortcut to select new source for existing circle or brush spot (forward slash key (/) on US keyboards) ?
View 2 Replies View RelatedHow to change the import resolution in photoshop to 300dpi or higher? At the moment it is set at a default of 240.
View 3 Replies View RelatedThe usual import menue has the options for importing on the right hand side. My system is now showing an import dialouge box and the import dialouge on the right is greyed out. How do I get back to the standard import screen.
View 2 Replies View Related