Lightroom :: Lost Source Panel Options When Importing Files?
Dec 13, 2012
I recently discovered a 'change' to my 'Source Panel' window when I try to Import new files from my CF cards. I have 4.2 installed. All that is available on the left hand side of this window is the 'Other Source' pull down box and never any file source like my hard drives or CF cards or anything that used to be there prior to about a month ago. I reinstalled this program twice without any changes. Have I shut something off by accident? My buddy has the same program and he cannot find any reason my should be any different than his but it is.
View 1 Replies
ADVERTISEMENT
Oct 13, 2013
Issue I have of 'As Shot' WB value being lost when I import images into LR 5.2
Set-up: Leica M9-P (firmware v1.194); Summicron f2 50mm; LR 5.2;
Image capture WB value set to 5000k; ISO 160; DNG file capture
Everytime I import the DNG files it sets the WB value to the last value I had the slider set to and not the value I have set on my camera.
I have tried reloading the firmware on the camera just in case it wasn't saving the value in the file but this has not worked.
I use LR on two separate MacBook Pro laptops using a common catalogue and image library stored on a single external hard drive. The problem occurs on both computers.
It's hugely frustrating. I want to be able to adjust the value on the camera depending on the local light situation at the time of taking the shot and have this setting transfer into LR5.2 at time of imort. At the moment I am having to keep a manual note of the image number and setting so that I can recreate it in LR once imported.
View 10 Replies
View Related
Apr 7, 2013
My Lightroom catalogue crashed, and i started a too old backup version. By importing new files, lightroom does show the older files in the importfield, are they still there? I desperately need them back,
View 4 Replies
View Related
Nov 28, 2013
lost basic panel from righthand side adjustable panel, how can i restore it? There are everything else but basic ones.
View 1 Replies
View Related
Jun 21, 2013
The first panel in LR5 (Develop Mode) has disappeared! This has Temp, Exposure then Highlites, Shadows and vibrancy, clarity etc? How do I get it back??
View 2 Replies
View Related
Jan 12, 2013
I've hit since upgrading my Photoshop installation from CS5 to CS6 about a week ago. I'm using Lightroom 4.3 and all was fine when I had PS CS5 installed. Since installing CS6, however, Lightroom can no longer find my Photoshop installation and, as a result, all the Photoshop-specific "Edit In..." options offered by Lightroom ("Merge to panorama", "Open as Smart Object", "Open as layers", etc) are greyed out. I use these a lot and would really like to get them back but I can't see anything that lets me point Lightroom at my Photoshop installation other than adding it as a external editor (which doesn't reinstate these options).
View 2 Replies
View Related
Jan 12, 2013
I've hit since upgrading my Photoshop installation from CS5 to CS6 about a week ago. I'm using Lightroom 4.3 and all was fine when I had PS CS5 installed. Since installing CS6, however, Lightroom can no longer find my Photoshop installation and, as a result, all the Photoshop-specific "Edit In..." options offered by Lightroom ("Merge to panorama", "Open as Smart Object", "Open as layers", etc) are greyed out. I use these a lot and would really like to get them back but I can't see anything that lets me point Lightroom at my Photoshop installation other than adding it as a new external editor (which doesn't reinstate these options).
View 3 Replies
View Related
Feb 20, 2014
LR 5.3, Develop module - I seem to have lost all my options under Camera Calibrate. All I have now is Camera Standard and Matrix, where I used to have a slew of options. I'm still using the same camera and lenses, which are known to Adobe, processing RAW files.
View 12 Replies
View Related
Oct 5, 2012
Lightroom 3.6 and Windows 7.Imported 164 source files that are in a specific collection. Updated the metadata. Now need to replace the source files with these updated files. Sounded like sync folders is what I should do. how do I get the collect in a folder so I can use the sync folder process?
View 6 Replies
View Related
Oct 20, 2008
Photoshop Version: Photoshop CS3 Windows XP Dell Computer I can not find the Clone Source Panel. When I click on the Clone Tool it does not appear. where I can access the Clone Source Panel?
View 1 Replies
View Related
May 21, 2012
I have a system of labeling my images to differentiate between the source files and the final edit images, but sometimes I need to apply different labels if there is something that's not ordinary to my process. My problem is that when I go back through my archive to look for something, I forget why I lebeled something a different color. I've been creating JPG's in Photoshop with notes for that specific job, but that's getting to be a pain.
It would be great to be able to create a note within Lightroom that I can view while I'm thumbing through my images.
View 6 Replies
View Related
May 21, 2013
How do I open the clone source panel in photoshop?
View 1 Replies
View Related
Feb 9, 2014
When I m in the source panel using the audio waveform and I add a marker the scrubber goes to the start of the clip or when I try to edit the marker it will take the scrubber to the start of the clip. Is there a way when I add a marker to stop the scubber from going to the start of the video?
View 6 Replies
View Related
Dec 20, 2013
Restored files from trash bin,developed 2 in LR and clicked file to NEW CATALOG and closed LR and reopened to see new catalog i thought would be with all the other folders. ALL FOLDERS GONE!!. I was promoted to import pics and having trouble noting that. Flikr account was closed too. Prompted me to registered.
View 2 Replies
View Related
Nov 8, 2011
I have sold my colleagues on using a ribbon control (instead of a palette) for our custom commands, but... I am stuck on one last detail.
Here's where I'm at.
Using AU examples:
- I have my beautiful new ribbon loading on startup/initialize (IExtensionApplication.Initialize)
- My dll is registering and everything is working as expect.
However.Many users prefer to un-dock panels from the ribbon and place them on their second monitor, either stacked or horizontal. Once the user exists autocad and restarts the application the panels (from the custom ribbon) return to their native positions. The out-of-box ACAD/ACADE retain their position. How can I get my custom ribbon's source panels to retain their last positions?
View 4 Replies
View Related
Jul 14, 2011
just purchased PaintShop Pro X3 and VideoStudio X4. I have a Panasonic camcorder which writes to mini DV tapes and has Firewire output. I previously did my editing using iMovie on an ageing Macbook. My new Windows 7 laptop doesn't have a firewire port therefore I was hopeful of capturing the raw footage on the Mac and then importing it into VideoStudio on the Windows laptop. When I try and import the .dv files created by iMovie I get the error 'File format mismatch'.
The videos play fine on the Windows laptop so I don't understand why VideoStudio can't read them.
I was thinking I could perhaps use something to convert the videos to a format readable by VideoStudio.
View 9 Replies
View Related
Feb 2, 2014
I seem to have lost many original CR files after import > developing > export as jpg. I had made selects to develop and then output images as lower rez jpgs. When I went back to the original folders (on an external hd) those CR select files were missing / a gap in the photo sequence now exists and I cannot locate the originals regardless of searches.
View 1 Replies
View Related
Jun 25, 2012
I just discovered that my Lightroom 3.6 has lost track of some files. The files exist on the hard drive, but Lighroom doesn't display them. When I try to re-import them, Lightroom reports that they already exist. When I search for them by file name in Lightroom, they aren't found.
View 3 Replies
View Related
Jan 2, 2014
Two days ago, in attempt to clean up my computer, I transferred all of my files to an external hard drive, including my LR files with a document ending in, ".ircat".
When I tried to open LR yesterday, none of my files appeared. I put the file back on my computer (from the external hard drive). I reopened LR and only a few of my files are showing (my most recent import and some random files). However, the majority of my almost 5,000 files are gone. I can see the names of certain galleries, the color labels, and I can even see if I've edited the photo or sent it to quick collection. However, I cannot see the photo itself. There are question marks next to folders that are completely empty. Is there a way to get my files back or did I damage them in the transfer?
View 3 Replies
View Related
Nov 16, 2013
Today I upgraded LR from 5.2 to 5.3 and then began editing pictures. When I tried to delete a picture a message came up to the effect that the file could not be permanently deleted from the disk since it could not be found. It offered the possibility of erasing the file permanently still. I chose that and the picture disappeared and a small box flashed by which said that the file could not be found. The number of files in the folder didn't change. How do I reconnect to the picture files which are in a stand alone hard drive - And - will the editing I did today be lost of subsequently be connected to the appropriate picture files/
View 27 Replies
View Related
Jul 18, 2013
I have backed up my files on my external hard drive, and then to make space I deleted some of them from my hard drive. Although I added the external files back into Lightroom (ver. 3) none of my Lightroom settings have remained, so all collection information and all development settings have gone. It there any way to get this information back? I have religiously done Lightroom backups but am afraid that if I use one of these back ups I will lose some of my more recent settings, work that I have done since I deleted the files from my hard drive. I am hoping there is some simple way of relinking to retrieve this information. I tried to use 'find missing photos' but couldn't get that to work.
View 3 Replies
View Related
Jun 10, 2013
I deleted some RAW files from my hardrive and while they still appear in lightroom, it says they are missing or unsupported. I backed these files up through lightroom but when i try to access the backups catalog I only get blank screens. Is there a way for me to get some of these files back through the backups? I have a PC and am using Lightroom 4.3 I think.
View 2 Replies
View Related
Oct 11, 2012
Have an open image in gimp 2.8 on suse 12.2, I call the "import palette" function, I set 64 colors, step 32, check the "from all layers" etc etc, and in the preview I see the 64 color palette I'd like. Looks good.
BUT: underneath the preview it says "the selected source contains no colors."And continuing the palette is indeed empty.
-----BEGIN GEEK CODE BLOCK-----Version: 3.12GCS d--(+)@ s-:+ a C++++ UL++ P+>++ L+++>++++ E-- W++ N o? K-w--(---) !O M+ V- PS+ PE Y++ PGP t++(---)@ 5 X+(++) R+(++) tv--(+)@ b++(+++) DI+++ D- G++ e* h>++ r* y?------END GEEK CODE BLOCK------
View 1 Replies
View Related
Nov 23, 2011
Usually when I Import I select what I want to Import from the left panel of the Library interface. I open Folders, then my C drive (whatever) and go from there. My entire file structure is displayed and I can navigate anywhere I want.
Tonight all that is displayed under Folders - C Drive is a listing of already imported folders. It's a list compiled from within Lightroom, not my computer's file directory.
I am not in Catalog and there is no slider to the left of the list - plus the list is not even a portion of my file list, it is something altogether else.
I was able to do a clumsy import by using File Import, which brought up an interface I have never seen before, much less used. I was able to "select a source" there and browse my files. But it was unfamiliar and I need to get my navigation window back to showing what's on my C drive when I click Folders - C Drive.
View 6 Replies
View Related
Jul 1, 2009
When I save my file that I have edited why do the blending options disappear when I save to a jpeg? I am using CS2
View 4 Replies
View Related
Mar 7, 2013
I'm not sure what happened but I recently lost my Right-Click options showing Select Similar specifically...is there a function key that disables this use? I realize this may be a simple AutoCAD function to fix but you guys are faster than perusing through the book.
View 7 Replies
View Related
Dec 21, 2012
I somehow accidently closed and deleted the left-side file panel(with the file three structure) in inventor 2011! And i cannot find where to activate it again in any of the menus.
View 4 Replies
View Related
Dec 11, 2012
I am working with autocad architecture 2011 for magicad. After some days a built panel under home tab missing. I check through CUI , ribbon and expanded home 2d/3d panel. I cannot get(see) build panel. how can I get the lost build panel.
View 1 Replies
View Related
May 11, 2012
I wish there were camera calibration presets that matched the in camera jpeg settings for Fuji files like there is for Nikon. (They mimic the classic Fuji films.)
View 3 Replies
View Related
May 13, 2011
Can't see tool options panel.Win7 64 and Maya 2012...Click on the show tools options in upper right and tool options panel will not show, also tried using the menus but panel with tool options will not show?
View 6 Replies
View Related
Nov 17, 2012
I'm lost moving axis,and i can't use rotating and scale options.
View 1 Replies
View Related
