Lightroom 3.6 and Windows 7.Imported 164 source files that are in a specific collection. Updated the metadata. Now need to replace the source files with these updated files. Sounded like sync folders is what I should do. how do I get the collect in a folder so I can use the sync folder process?
View 6 RepliesLR 5.3 has been running fine since I updated several weeks ago--Mac Mavericks
Is it safe to uninstall the old 4.4 App,catalog and previews ?
When will Lightroom be updated to accommodate Canon 6d RAW files?
View 2 Replies View RelatedI recently discovered a 'change' to my 'Source Panel' window when I try to Import new files from my CF cards. I have 4.2 installed. All that is available on the left hand side of this window is the 'Other Source' pull down box and never any file source like my hard drives or CF cards or anything that used to be there prior to about a month ago. I reinstalled this program twice without any changes. Have I shut something off by accident? My buddy has the same program and he cannot find any reason my should be any different than his but it is.
View 1 Replies View RelatedI have a system of labeling my images to differentiate between the source files and the final edit images, but sometimes I need to apply different labels if there is something that's not ordinary to my process. My problem is that when I go back through my archive to look for something, I forget why I lebeled something a different color. I've been creating JPG's in Photoshop with notes for that specific job, but that's getting to be a pain.
It would be great to be able to create a note within Lightroom that I can view while I'm thumbing through my images.
I just updated photoshop CC and now I can't save changes to my files.
View 4 Replies View Relatedwhen working on Indesign, Photoshop files, and I save changes, the new date isn't saved, the file always retains the original date. I am using CS4.
View 2 Replies View RelatedUsing PSE9 on 2 PCs. Files are stored locally on each, and updates synced via Windows Mesh.
1) Add tag to jpg on PC1 using PSE.
2) Execute PSE "write to file" command before closing app
3) Confirm on PC2 via Windows Explorer that tag info is updated on local file
4) Open PSE on PC2, bur additional tag info is not recognized by PSE.
5) Tried to re-import test files in PSE using "Get Files" function, but tag data was still not read by PSE.
6) Manually added new tag to tag list, reloaded PSE, but new tag info still not read on file.
7) Ran Optimize and Repair catalog functions, but problem persisits.
How do I get PSE to read tag info on updated jpg files without rebuilding the entire catalog every time I edit a file?
I am having an issue with alignments not updating to the latest source drawing. Initially, the alignment source drawing was in File1.dwg. Due to a design change, a few of the alignments were revised in a new File2.dwg. For the first time ever, I used the Data Shortcuts Editor program to repoint the data shortcuts to the new File2 location. By all accounts, it looks like the data shortcut were updated to the new source drawing (File2).
The problem is in some files some of the alignments still source to the File1 location and even when manually synchronizing it still sources from File1. Additionally, it seems random in terms of which alignment and files source to File2, even to the point in some files one alignment will update to File2 and other won't and some alignments will update in some files but not all. Note that I am not the original creator of the files so I don't know much history on the files (no alignments seem promoted however).
What’s the best way for me to get all the alignments to point to the new data shortcut source drawing location?
Can PSE 9.0.3 be updated to read Nikon D600 NEF files?
View 1 Replies View RelatedAny good source for DEM files? Geocomm has STDS DEM's but last time I tried them they looked like junk. I can't seem to find the layer on the national map server or earth explorer.
View 4 Replies View RelatedI recently bought the 'Work' template from Outfront, complete with the Photoshop source files. I then acquired a copy of Photoshop and immediately wondered how I can modify the colours in the source files.
View 1 Replies View Relatedwhat are your thoughts, yes or no? if yes, why, if no, why?
I feel its very un-businesslike to require/request them it ranks up there with requiring or requesting free specs. looking forward to your responses so i can come up with a polite way to explain why I won't hand over my work.
I have a project which has become very disorganized over the last year of editing due to PPs poor ability to effectively share sequences/projects across multiple computers. My assistant editor used a different computer and so the links in the sequences point to multiple "source" files in the project (some in imported folders). However, there is ultimately only one original video clip. The problem is that Premiere Pro won't allow me to delete the nested versions of the source files without also REMOVING the clips in each of the sequences that uses them. For example, the project folder looks like this:
- Original File Folder
-- videoClip-001.mov
- Imported File Folder (imported on one of the many exchanges between editor and assistant editor)
-- videoClip-001.mov
- Sequence version 1 (Uses the second video clip, not the first - although they are ultimately the same video file)
If I delete the Imported File Folder, which only has a mirrored reference to the same video file as in the Original File Folder, then the clip in Sequence Version 1 dissapears. What I expect, rather, is to see a "missing media" message in the sequence so I can reconnect it to the version in the Original File Folder. But I can't. BIG HOLE in Premiere Pro CC.
Why do I want to do this? In a large project with hundreds of video clips, keeping order is very important. With the sequences using multiple "versions" of the same video clip, that order goes down the tubes and it becomes impossible to work.
I am currently creating templates for my drawings in order to standardise their use which includes the creation of templates, multileader styles, text styles etc... and placing them in custom tool palettes. I am also looking to add standard blocks such as fasteners and steel sections to my tool palettes however this has thrown a bit of a curveball. Basically I want all the blocks that I place in the tool palettes to move with the .dwt file I have created. At the moment it would appear that the source of the block is within the filing structure of the computer as apposed to just the template file it is placed in. Is there anyway to resolve this, or have the blocks so that they are stored within the template so that if the template is moved onto say a stand alone laptop elsewhere the blocks that appear in the tool palettes would go with the dwt file?
View 1 Replies View RelatedI'm fairly new to Map 3D and I'm trying to attach either an Excel or Access file as a data source. I started out with a simple test case and created both Excel and Access files following the steps outlined in the first reply in post:
[URL].......
When I get to the drag & drop step to attach the data I get the following error messages:
Invalid Wordspace file format: My DocumentsTEST.xlsx
Invalid Wordspace file format: My DocumentsTEST.accdb
Not to be deterred, I saved the source files back to earlier xls and mdb file versions and was successful at attaching the data in both cases, but Map reported that there were no tables when I tried to define a link template.
I just installed Smoke Ext 1. I noticed that all of my source files on an existing job, that are H264, don't show up...they just have a black screen with audio.
Is H264 not compatible with Smoke?
I've written a script to allow you to select an image to replace any number of selected files. Each file starts out as an embeded image with a .note to determine where the basis of alignment for the new file should be (i.e. "top," "bottom," "left," "right"). You'll find the code below:
#target illustrator
if (app.documents.length > 0) {
var docRef=app.activeDocument;
var docSelection = docRef.selection;
// ** Get new file
[Code]...
For some reason, the ".note" added at the end of the script gets erased once the script is complete. I can even get it to confirm that it applied the note to the image, but once it's complete, it's gone.
Will the current plugins for Sigma DP1/2 RAW files work with files from the DP1/2 Merrill cameras? And if not, is Adobe developing plugins for these cameras?
View 2 Replies View RelatedAfter many years of using LR this is the first time I've encountered this issue (see 1st screenshot below). LR is scrambling my files. The affected raw files open fine in other programs, including adobe photoshop cc (see 2nd screenshot).
View 15 Replies View RelatedDeleting files and saving files brings up an error message. Files can't be deleted from lightroom which makes editing a nightmare. Also Saving Files (raw of jpeg), brings up an error message everytime.
View 1 Replies View RelatedFollowing previous LR upgrades (3.2, 3.3, 3.4, 3.5 and 3.6), old files were automatically removed from the Program Files folder. However, I just upgrades from 3.6 to 4.0 and notice that the old files are still on my hard drive in the 3.6 folder. Do I need to keep these files or can I UNINSTALL LR 3.6?
View 5 Replies View RelatedWhen I try to export retouched files to hard drive files my Mac crashes and has to be force quitted. I thought this maybe a L'room 4 problem so I bought L'room 5 and it's still happening. What can I do?
View 3 Replies View RelatedThe issue probably has to do with the differences in settings. I am using the 64 bit version of Windows 7.I imported a group of pictures with the XMP sidecar files generated with Lightroom v3. All the image files, a mixture of Canon Mark 5D II RAW and jpg files from my point & shoot UFO camera, imported without issue picking up all my tagging and GPS settings. When importing you are put into the Library module and from the Library module I could click on any RAW or jpg file, look at the meta data and view full screen.
I then entered the Develop module with a jpg picture selected and none of my settings made it across. The process was set to 2012. I was able to try out the new adjustments and all worked very well.I then selected a RAW file while still in the Develop module and all hell broke loose.
I got a tip window pop up, the film strip went orange, the rest of the app screen then became greyed out and then behind tip pop up a crash window containing this information appeared:
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 4.0.0.1
Application Timestamp: 4ef2621d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.1
Fault Module Timestamp: 4d5f034a
Exception Code: c000041d
Exception Offset: 000000000003c1be
[code]....
There was no other path but to have the app close after that. Now since Lightroom has left off with the RAW file in the develop module when I restart the app it starts in the develop module with that same RAW image selected and I crash before I can change to a jpg. I am probably going to have to delete and recreated the data file to use the app again
After the all this I went back and checked to see how I had the catalog settings in LR 3 set because there were no sidecar files for the jpg images. I did not have the option to write settings to jpg and tif files but did have write settings to sidecar set. So I have a bit of a mystery why I have no sidecar files for jpg files when I should have based on the way the settings were. This probably explains why I had no issues at all with them in LR 4.
I am going to get LR 4 working again and then import the same batch of pictures without any sidecar files and see if I have any issues. I will report back soon.
I'm using LR 4.3, and would like to know how to determine which .dat cache files are associated with a certain folder of images. I don't know programming code, and, when I open a .dat cache file, I cannot determine which image file it goes with.
I've noticed that when I remove a folder from Lightroom, the cache files for the images in that folder remain, because the size of the cache doesn't change. I know I can flush the cache, but I don't want to have to reload tons of .dat files already present in the cache.
I recently lost some original files to a hard drive failure. Is there a way for me to retrieve some printable files from LR catalog files?
View 1 Replies View RelatedI need to transfer my files from Aperture 2 to Lightroom 4 without losing the raw files. When I did it on my laptop they are now all Jpegs. I don't want this to happen on my desktop.
View 1 Replies View RelatedI am currently using a Nikon D7100 and recording my photos in the Raw/NEF-RAW format. Recently, whenever I am uploading my photos to Lightroom 5, my photos are changing to .dng files rather than staying in the NEF file. When I go and look back at my previous imports from the past few times, they are in NEF and NOT in .dng. Why is this doing this and how do I turn this feature off so that my files remain the same going from my camera to my computer through importation.
View 1 Replies View RelatedThis message comes up when I try to import to light room. A box comes up that says "Import Results" then the error message shows with a group of file numbers that wouldn't import.
View 1 Replies View RelatedI just upgraded to a 5D and LR4.. when I import the files load as CR2 files, not DNG files. When the files import it takes 4 files to find them. It also will not recognize the file names in the library. How do I fix this to import like it did in LR 3??
View 2 Replies View RelatedRAW files from my D300 and my D600 look completely different. These are both NEF files, imported to Lightroom 4.2 using exactly the same import preset. I did NOTHING to either file, except that the D300 one was at 1/160 second and the D600 one was at 1/200 second, so I changed exposure on the D300 one by 1/3 stop so they would match. What I did was to shoot the D300 picture, then carefully changed the lens over to the D600 without moving anything, changed the D600 to DX mode to match the field of view and shot the same picture. The files should be essentially identical.
[b]This is from the D600:[/b]
You will notice that the saturation on the D600 image is much higher. And it's much more yellow. The pictures were shot 2 minutes apart, from the same spot. Same lens, same camera settings.
First thing I did was to change the color temperature and tint to match: from 4150/+6 to 4200/+2. There was no visible change (I'm looking at them in compare mode in Lightroom on a calibrated monitor).
Next, I tried to change the D600 image to match the D300 one. I had to make substantial changes to both color balance and saturation of various colors, as well as contrast and black levels to get close. I'd give you absolute numbers but it varies from image to image. In this case, I had to drop the color temperature to 3500, for instance. The easiest way to do this was to use the white balance eyedropper on a grey area in the road.
I'm wondering if this is related to how LR handles the D600 NEF files. LR 4.2 says the D600 algorithm is 'preliminary'. Could this be part of it?