After Effects :: How To Temporarily Mute Audio (not Just Reduce Volume) On Timeline
Oct 17, 2013
I'm new to Adobe After Effects and trying to adjust audio levels on the timeline using key points. This works great for db levels but the maximum level that can be set is -48db and this is still allowing some audio to "bleed through". I can mute the audio for the whole track, but that's not what I want - I want to mute the track at certain keypoints on the timeline.
I can't see any way to do this in After Effects.
View 4 Replies
ADVERTISEMENT
Mar 6, 2013
inside CFX, when i move node in a network with a lot of nodes, sometime when i drop the node, i can accidentally connect it to wrong node, as there will be a lot of connection line in that area. So is there any way i can disable this autoconnect feature temporarily ?
View 4 Replies
View Related
Sep 20, 2012
I have video clips on several layers in the timeline and want to mute the audio of specific video clips - they are on video lines, not the audio line.
View 4 Replies
View Related
Aug 21, 2011
I have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies
View Related
Apr 8, 2014
is there still no way to disble / mute the audio monitoring in the source window? I'm aware that one could press G and type in a drastically low audio gain level, but this is a clumsy workaround.
View 1 Replies
View Related
Dec 21, 2013
I have quite a few merged clips that the director wants me to export so that he can watch them elsewhere than the suite. If I export them individually within Premiere CC I have sound on the exports but if I use the queue function that opens Media Encoder they are mute of audio.....is this because they are merged clips?
is there a workaround other than doing them one at a time as there is alot of clips.
View 4 Replies
View Related
Jul 29, 2013
I'm working on a design in Illustrator CS5 which has textures and drop-shadows applied to most of the objects. I want to make some changes to the colors, but it re-renders the effects each time I change things. Is there some way to globally disable effects and just display strokes, fills and gradients? I know about outline mode, but that's useless for editing colors. Surely I don't have to go through every object and disable the effects one by one and then turn them all back on later?
View 8 Replies
View Related
Jun 8, 2013
I am using X6. When I tried to launch a music track from "Smartsound", (from the owned section) the "Add to Timeline" was greyed out.
I Split the Audio from the video and it landed in the VoiceOver track. Is it possible to make it land in one of the music tracks?
Is it possible to alter the volume across all the clips on the timeline without having to alter each clip separately?
View 3 Replies
View Related
Dec 24, 2013
Have reinstalled Premiere Pro 6.0.5 because I cannot drag Audio Transitions or Effects to any Timeline sequences in my Projects. Have tried modifier keys, but to no avail.
View 1 Replies
View Related
Sep 28, 2013
I ve bought PS11 and when I get to the Video tutorials Page I can roughly understand what the Instructors say because they speak way too fast for my italian ears and cannot make much of what they say.
My question is this; how can I slow down the audio in a Tutorials? I m sure Adobe has ways to reduce the audio in their tutorials.
View 9 Replies
View Related
Nov 29, 2012
I am wondering if there is another method to control volume levels on the audio and voice over tracks. I am thinking particularly about a method to easily (automatically) reduce the volume of the background music when a voiceover starts and raising it again after the voiceover is finished.
I find the existing process of capturing a volume node fiddly and, for me, a bit hit and miss.
View 11 Replies
View Related
Jan 11, 2011
I have been using VS since version 9 and I seem to get the same thing on each version. After I have completed the project and burn to DVD the audio track seems too loud. I don't seem to notice it playing back the file (computer speakers aren't much chop) but once in the DVD player you always have to quickly turn down the volume once it starts playing. There is no static or distortion its just too loud. I now go into every song I input on the audo track and lower the levels. And it only appears to be the music. Audio in the video clips comes out at normal levels and does not need adjusting. If anything I have to boost the video clip audio because it's too low. The songs I import are directly from CD's or MP3's from my music folder.
Its not a real problem as I can fix by constantly lowering each song but is there a way to set the preference to lower the output on the audio tracks? That is to see the level automatically set below the 0 line when music is added. Or is it something in the burn proceedure in MF7?
View 2 Replies
View Related
Dec 20, 2012
I am creating a "year in review" for a local fire company. I am trying to set up Video Studio Pro X5 so that when there is audio in the video clips the background music lowers in volume so that I don't drown out the audio in the video. How do I do this?
View 5 Replies
View Related
Oct 17, 2013
I have created keyframes from audio file and used them to generate some effect, all works fine, it is amazing how easy it is However, I would like to generate flash (?) so that these effects would be dynamic to different audio files after export.
What I want is basically to create effects that can be used in life event to the streaming music.
View 4 Replies
View Related
Aug 8, 2012
After staying away from video editing for some time I have just installed VS X5. But here I can't find the Audio View in which I could adjust the sound volume (using the graph) in the video track. Has it gone away or is it just that I can't find it?
Does this mean that I have to split the audio from the video to be able to adjust the volume (up and down at various places, not just the track volume).
View 2 Replies
View Related
Apr 2, 2012
I've just bought VideoStudio Pro X4 and I want to mute the sound on my clips as I'm going to have music playing instead. On page 115 of the manual it says I will find the clip volume control in the Music and Voice tab. I have been all over the program interface and clicked on virtually everything but I cannot find a Music and Voice tab. In the end I had to split the audio for each clip and delete it. how to find the Clip audio volume control?
View 2 Replies
View Related
Dec 9, 2013
I have Premiere CC7.1 and am having problems playing back the audio after importing a synced sequence from Plural Eyes. The wierd thing is that everything plays back beautifully until I close Premiere. When I reopen the program, I see the audio on the timeline and it plays back in the source monitor but there's no audio in the program monitor.
View 3 Replies
View Related
Mar 25, 2013
I am working on a video at the moment, it's pretty painfull because I am tying to adjust the audio. When I try to adjust the audio of one of my video's within the timeline the only thing tha appears is "Motion".
In the tutorial, when she right-clicks the correct features show up:How do I correct this?
View 1 Replies
View Related
Sep 20, 2011
I know this is an easy one, but how do you change audio levels (volume) inside a song track, including length of fade in and fade out?
View 2 Replies
View Related
Aug 10, 2012
Is it possible to have an audio file that's placed in the timeline display the actual wave image rather than just a blank bar?
It doesn't seem like it but thought I'd post the question as other similar editors do have this feature and it seems pretty standard and EXTREMELY USEFUL!
View 1 Replies
View Related
Jul 1, 2012
I'm having a bit of a problem with audio crackle. With one music track playing on the background, and an audio file set to play simultaneously, results with a crackling audio file. As far as I can say, the music file on the background plays OK regardless if the voice track crackles. The individual clips play OK, so this isn't because of the source audio. The project is a trailer, with the narrative voice consisting of audio files on the voice track and music playing on the background. It doesn't matter whether the narrative audio is set on the voice track or an additional music track, same problem every time.
The funny thing is that this only occurs when I'm using the timeline view or creating a video / an audio file from the project - in the 'sound mixer'- mode everything sounds and looks perfect. When I select the sound mixer and then click 'share' -> create video / audio file, the program apparently switches to the timeline view and the crackle transfers to the end result as well.
I've tried this on XP and Win 7, with no difference whatsoever. Updated Direct X, installed RealPlayer, Media Player and a whole bunch of codecs, but to no avail. Tried .ogg, .mp3 and .wav as audio formats. This is actually what I find really weird - an uncompressed .wav is the last file type you'd expect to have problems with.
View 7 Replies
View Related
Jan 27, 2014
So the option to add Adding Video/Audio Tracks to Timeline are "grey'd out" and what's even more strange is that they don't even have the one or two tracks that are usually in the timeline when you open new project.
View 14 Replies
View Related
Nov 2, 2013
Last week, I was editing a multicam sequence (in Premiere 7.0.1) and I found it always very usefull to see the waveform. After upgrading and choosing Sequence -> Render Audio, the CTI jumps to the beginning of the timeline and starts playing and nothing more. No rendering at all.
View 14 Replies
View Related
Apr 30, 2013
I've listed my setup below and then have stated the issue I'm experiencing.
27-inch, Mid 2011 iMac
3.4 GHz Intel Core i7
16GB 1333 MHz DDR3
AMD Radeon HD 6970 1024MB
Running Mac OS X Lion 10.7.5 (11G63)
Currently working off of a portable 1TB G-Technology G-DRIVE via FW800.
Working in Premiere Pro CS6 Version 6.0.2
Editing in a sequence with settings:
1920 x 1080 23.976fps (also tried in a 29.97fps timeline with same issue)
Working with footage that is 23.98fps
Working with a combination of ProRes 422 (LT) and native H.264 Quicktime files strait from a 5D Mark 3.
The issue I'm having is during playback the audio will competely drop out. The video will continue playing on just fine but the audio drops completely out. All audio levels drop as well in the audio mixer meters so it truly is losing all communication with my audio layers in the timeline.
I read in other forums to go into Finder and delete out the .caf files, re open Premiere Pro, wait for them to be recreated then carry on. I tried this approach with no luck. Deleting the .caf did not change anything. Audio is still dropping out as I try to play through my timeline. The only way to get the audio back is to pause then press play again. I have 5 total channels of audio with only 2 of those channel active.
This is incredibly frustrating have to export out a video just to be able to watch it through.
View 9 Replies
View Related
Jun 30, 2013
Why have we never been able to modify audio channels once a clip is added to a sequence? I'm guessing there's a good reason Adobe has never had this feature. The lack of this feature is explicitly mentioned a few times in the audio section of the Premiere Pro CC manual, as if it's a benefit NOT to have it. But the benefit is entirely lost on me.
In my workflow, I synchronize my double-system video and audio before anything else. I do this in PluralEyes (and unfortunately I'll have to keep doing it this way, until PPr's sync on sound feature gets fixed—for me it's never worked).
Once PluralEyes has synched hours of footage and audio and placed it on a PLURALEYES GENERATED sequence, I import that sequence into Premiere. Note: Since I haven't gone through the step of creating a blank New Sequence, I don't get the opportunity to setup my audio channels the way I'd like in my sequence (i.e. Stereo recordings should occupy ONE track, not two. Typically these tracks come from a camcorder and are used for reference sound, or ambient noise at best, so I don't need them taking up precious real estate in my sequence).
Since PluralEyes doesn't merge my clips for me (or rather I don't want it to since I'm usually doing multi-cam sequences where I want to keep all 14, or so, tracks of audio), I have to go through the clips one by one and do a Merge Clip action once I've adjusted any minor sync issues, or determined which tracks I actually want to keep. But, and here's the key, at this stage I'm not yet 100% certain whether I'll use the nat sound or the wireless mic sound (separate audio recorder, etc). Furthermore, I don't really want to think about that at this point. After I've spent a few mind-numbing hours just ingesting files, sync and merges, I want to jump into the edit as soon as possible, before I lose all will to finish this edit. If I modify my audio channels right now, I'll lose the ability to make some creative decisions later on.
I'd like to start whacking out an assembly edit. And then after I have a rough program, I can start looking at which audio tracks (nat or double-system) I like better in each circumstance. This is where I become stumped that at this stage, I'm locked into whatever audio channels I've setup (or not) in the earliest stage of the edit, back before any media was actually on the timeline! It's at this stage, and usually only at this stage that I want to start Modifying Channels—FROM THE TIMELINE!
Feature Summary: Right-click on any clip, (master clip, sub-clip, merged, nested or otherwise) in the timeline and choose Modify > Audio Channels.
View 16 Replies
View Related
Dec 4, 2013
I am a new VS6 user (coming from Pinnacle Studio). Is there a way to display the video and the video's audio waveform on the timeline at the same time. I see where I can select the Sound Mixer button above the timeline, which does show the audio waveform, but then the video thumbnails disappear.
2nd question, when I put a fade-to-black transition between two clips, it seems like the clips' audio does not get faded out then in with the next clip. Do I have to add a separate audio fade for every video fade?
View 8 Replies
View Related
Mar 13, 2014
I have a composition which has two pieces of VO. Each has an associated text block.I want to play the first VO when the first text is clicked. Then, when the VO ends, I want the first text block to fade out, the second to fade in and play the second VO when tapped.
I have the timeline set up with labels to play through the transitions at the end of the first VO. No issues there.I have the audio playing when I click on the text blocks. All good.However, I do not know how to make the timeline wait for the audio clip to end before playing.This is the code for the first text block:
sym.$("RUP01_Nar_1")[0].play();
sym.play('Nar2');
This plays the audio but also plays the timeline instantly (so the text blocks fade from one to the other as soon as the audio starts).
I figure I need some sort of code in between which says, essentially, 'wait until the audio finishes then [play timeline]'. But as much i have searched I cannot find anything to do that.
View 3 Replies
View Related
Dec 1, 2013
I am having an issue with Premiere 6.0 that I can't seem to solve. Some audio clips are showing up in red in the timeline and they just don't work at all. Here is how this went down.
I had to format my computer due to Windows related troubles and so I reinstalled the OS, installed all of my Adobe software and dropped the files back into their original locations. When I fired up premiere and opened the project, everything was looking fine and dandy until certain clips showed up in red and just didn't work.The only clips that were affected were audio tracks from AVI files that I separated from the video. They are not missing , premiere knows where they are and if I drag one into the timeline it will work just fine.
View 6 Replies
View Related
Jun 27, 2013
This is a daily occurrence. As I go along editing, I inevitably come upon some video clip (or audio clip) on my timeline that is missing it's original audio (or video) counterpart. I've previously deleted the audio portion (or video) at some point earlier in the edit, when it made sense to do so. Now, though, I change my mind, or I need to hear the audio to sync other clips, or just hear the audio for reference, etc.
How do I bring back the corresponding media? I love the new "Join Through Edits" command in Premiere Pro CC, it seems that a companion feature would be something like "Restore Original Linked Audio / Video"
Match Frame seems close to what I need, but involves a few more steps than a right-click, or keyboard shortcut (maybe I don't properly understand how it works). Does any command exist that would do what I'm needing? I can't imagine I'm the only one who would need this function DAILY.
View 6 Replies
View Related
Aug 22, 2013
I'm trying to recreate an audio/visual feature that was built in photoshop/indesign (with hundreds of individal frames, that took hours to complete) in Edge. I've started it and gotten about half way, but I've run into a roadblock and can't figure a way around it.
I need the animation to start onclick with a play button that switches to a pause button. This single button needs both play and pause functions associated with it, and the background image has to change accordingly. I've got the animation to go as far as play onclick, and pause, but I can't figure out how to get it to play again after the initial pause.
I'll need to add in an audio track to go over the whole thing, that will also play/pause. The entire thing has to be timed to the audio track. I have never done much javascript.
View 2 Replies
View Related
Dec 11, 2012
I trimmed a wav audio file with the little yellow markers in the clip by placing the markers where I want them and using the scissors, then saved it, but when I drag it down to the timeline it comes down as the original long file.
View 2 Replies
View Related
