Photoshop :: Recording What's On Screen In CS5 On Separate Layer
May 4, 2012
Is there any way to record a Photoshop maneuver like airbrushing onto an otherwise transparent layer so the end result is an animation?The real world equivalent of what I'm trying to do would be to have a video camera behind glass and a spray can spraying the glass from the other side.
I know there are programs that record what's on screen but I don't think they allow you to have a transparent layer. I may be able to use one of those programs and key out the non airbrush background. I'd like to be able to import the animation into Premiere so it looks like paint has been sprayed over whatever clip is underneath the airbrushing frames.
View 2 Replies
ADVERTISEMENT
Oct 9, 2013
I am making a video tutorial on using a desktop publishing program. Everything is recording fine EXCEPT when I hover over a tooltip or click for a drop-down box. I can see the tooltips and drop-down boxes during the recording session, but (how odd!) VideoStudio doesn't record them.
When I play the wmv file, the cursor hovers over an invisible tooltip and the cursor moves down the invisible options in the invisible drop-down box.
View 5 Replies
View Related
May 14, 2012
I have used Camtasia for screen recording for a long time, however I purchased two 24 inch wide screen monitors with a resolution of 1920x1080. Camtasia recording will not record a full screen at this size.......in fact, they recommend 1280x720! So, I updated my VSP from x4 to x5 due to it now having screen capture. VSPX5 will not record full screen 1920x1080 at all (already mentioned in a previous post and currently under reveiw with Corel). It seems the limit is 1676x943 and even then, part of the screen is chopped off if one has a wide screen. Resolution has to be reduced. This is a PITA!
In order to do my screen recordings I either have to reduce the resolution which I do not like to do as it distorts everything on my screen, or reduce the size of the page to record and fit it within a custom size. Not the best, but it's a workaround.
View 6 Replies
View Related
Oct 5, 2013
I used the Screen recording feature to record a little tutorial that is about 4 minutes long. I was shocked, when I watched it afterward, to hear that the sound, although fine at the start, gradually becomes fainter, higher pitch, and overall totally unusable. I thought it was just a fluke but I tried it with 3 videos, and I always get the same problem. I used the settings by default, changing only the file name and location.
Is there more to set for the screen capture to work correctly?
View 4 Replies
View Related
Nov 15, 2013
My version is VideoStudio X6. Since the update to Windows 8.1 I have been having this error message every time I tried to record the screen. The message shows "An error occurred on your audio device." and it can't record. The drives're up-to-date, I've checked on the devices they all work fine. I need to record system sounds, however I tried to switch to another device but the error kept appearing. I also wondered if there's an error why would the app not showing the detail of the error but just describe it as "an error" because it's so vague it can be anything.
View 7 Replies
View Related
Dec 8, 2013
I make gaming Youtube videos, and recently bought a new computer and needed a new recording software. So I started looking into Video Studio. I am currently using the trial, but will really soon get the full version. So I was gonna record and noticed you can change what audio will be recorded. Cool! So I enabled both of them, but it doesn't work. If I enable System Audio, microphone audio will be disabled, and vice-versa.
Is there any way I can record my game AND my voice without recording the my voice afterwards (I wanna record it live)? I quickly tried to record two video at the same time, each recording having a different audio, but it just recorded one. I don't wanna have to buy $37 Fraps or some other "just-for-recording" software.
View 2 Replies
View Related
Aug 23, 2012
Screen Capture is not recording menu items in FL Studio
I am recording a series of video tutorials for the audio production software FL Studio. I have duplicated the problem in two version of FL Studio, FL Studio 8 & FL Studio 9. I start a screen capture and everything is recording fine. Part of my tutorial includes selecting a menu item in FL Studio. After my recording is finished I am noticing that the menu (dropdown) is not displayed in the screen capture. I can see the mousing clicking the menu items but the menu is not displaying. All other aspects of screen capture are working perfect.
I am using Corel Video Studio X5. No updates to the program have been made, the computer I am using it on was only connected to the internet during activation.
View 5 Replies
View Related
Feb 7, 2013
I want to record an action which creates an graduation layer and uses the "auto" function layer in the layer settings. But this adjustment will not be saved in the action (up to CS 5.5 this was no problem).Is this possible in CS6, too?
View 2 Replies
View Related
Mar 18, 2013
I'm adjusting a photographic image and am using both a filter effect and a layer style in the same layer on a Smart Object. I want to separate the two effects into two layers, so one layer has the filter effect (Nik) and one layer has the layer style (Color Overlay) (with the goal of merging/rasterizing the Nik filter effect with the Smart Object but keeping the layer style unmerged). I can make two layers and move one effect without problem, but the visual result of each effect on a separate layer is quite different from having both effects in the same layer. The Blend Mode for all my layers is Normal. Within the Color Overlay panel, the blend mode is Linear Burn.
Layer 1: a layer style and a filter effect, stacked
looks very different from....
Layer 2: a layer style
Layer 1: a filter effect
View 4 Replies
View Related
Oct 21, 2013
I need to set up a page layout with 4 separate A3 pages and have them as a 2x2 layout on screen
The overall size will be A1 but the printers require A3 files outputted as pdfs
View 5 Replies
View Related
Nov 23, 2008
Can somebody tell me the method of separating a shadow from a layer where you added that shadow ?
I haven't use this technique in years, but wanted to try this, and now cannot seem to do it. I remember way back, there was a simple command to accomplish this, and it seems to no longer exist.
View 4 Replies
View Related
May 8, 2012
Im trying to copy a channel as a separate layer Im not sure how to word this right. I wanna keep the red channel cause like it as a starting point but i also want to keep the RGB to add some of the original color on parts of the red channel
View 1 Replies
View Related
Jul 21, 2013
How do I put a selection on a separate layer?
View 3 Replies
View Related
Sep 9, 2013
Is there a way to save a cutout layer as a separate file?
View 3 Replies
View Related
Feb 7, 2013
I am using Creative Suite 5.5 on my MacBook Pro...and today had issues demonstrating the simple process of dragging one person/image onto another, applying a quick mask to do some simple morphing.
But...one, I couldn't drag the image from the internet and drop onto the project, but had to go to Edit and copy, then create a new file and hit paste. Placing one image side by side to another...I was not able to drag the image of one person to drop onto the other. I either had to use the marquee tool, drag around the image, copy and paste or...found I could drag the image from its layer in the layer's palette and drop onto the project.
More frustrating was that once I had both images in the same project, I was not able to move the new person/image added to locate in right position over the background person/image. I would drag it to that new location, and it would snap back to the original location. Obviously the need to take any image added and move it around to orchestrate your image is important.
I have asked a number of artist friends, checked the mode (both images are RGB) and both images at 8 bits...
I presume it is a simple command that will release the image to stay where located using the Move tool...but am not familiar enough with Suite 5.5 obviously.
View 1 Replies
View Related
Aug 25, 2013
How would I create a separate layer to do cloning touch ups?
View 1 Replies
View Related
Jan 3, 2013
I am wondering if there is a way to create an adjustment layer that only affects two layers that are spread apart. What I'd like to be able to do is change the color of both layers at the same time.
The problem is, I can't group the layers together and add an adjustment to the group because one of the layers (Number Color Flare) has to stay on top of the rest.
View 5 Replies
View Related
Aug 30, 2006
way to automate the process of adding my company name and most important file name to the image. What I want to do is, before sending a preview to the client, to put my company logo and name of the file directly on the image, let's say in the right and left lower corner of the image. My clients usually want to print the images and have the file name right in front of them so that after they choose the image they can tell me which of the versions/files they like, without going back to computer and looking for the file name there.
View 4 Replies
View Related
Mar 9, 2013
I'm using elements 11. I'm trying to separate shadow into a new layer to work it. When I copy and past layer style into new layer, FX icon appears next to new layer, but no shadow. My settings are visable. I can see the shadow in the original image, just can't separate it into new layer. It seems like I'm missing something simple. Is this possible in Elements 11?
View 8 Replies
View Related
Jun 1, 2013
How to use layer masks to separate line art from white background ?
View 1 Replies
View Related
Aug 24, 2013
When using the Healing Brush tool in Normal mode, the opacity of the cloned pixels when painted onto the same layer as the source pixels will usually be decreased to blend better, BUT if the cloned pixels are painted onto a separate layer (to work non-destructively) the tool will NOT decrease opacity and the Healing Brush will work more like (if not exactly like) the Clone Stamp - true??
View 2 Replies
View Related
Mar 30, 2011
I have a few layers and one overlay. I would like to be able to export all the layers to separate png's however can I do that with one persistent layer that is saved with every other one?
View 9 Replies
View Related
May 27, 2008
I have a PNG image and like to edit the alpha mask. As there's no separate alpha layer inside the PNG image, but all pixels have a certain alpha value, I'd like to extract that with Photoshop. How can I do that?
View 4 Replies
View Related
Jun 28, 2013
I have been doing so much research trying to figure this out. Either im missing something or its not possible.29571-saving-layers-seperate-files-one-persistent-layer
I ran across that post on this forum and that is exactly what i want to do (at end of post)Ive tried the LayerSaver jsx but it only allows selected layers and top layer and bottom background.
my bottom has to be transparent. I have an icon set that has a bottom group (that i can merge to layer) and a top group (that i can also merge to layer) and the middle contains my icons.
View 4 Replies
View Related
Feb 21, 2012
I have a very simple PSD, so i'll try to explain this super simply..
one transparent layer, with just a pair or eyebrows, with the only added blend effect as 'multiply'
one background with a face, no eyebrows.
the layer blends the eyebrows in to the background face perfectly.
i want to save the layer as a separate file keeping the tranparency and including the result of the multiply effect, without the background.
the reason why i want to do this may confuse things, but basically i want several different eyebrow colours to be interchangeable over this face in an application that doesn't recognise the blending link with the background, so i want to save it in PS !
View 18 Replies
View Related
Mar 24, 2014
can you export layers with the layer names to separate jpeg files?
I have a photoshop psd file with many layers that I want to export to separate files with the new name of the files being the same as their layer name. I have the following programs:
Using Photoshop CS4?
Using Photoshop Elements 7?
Using Photoshop Elements 12 (Trial)
View 1 Replies
View Related
Oct 26, 2011
Is there a way to have separate objects in 1 layer, what i mean is that if you paste something, that i want it to show up as a objects in de layer, like in photoshop, so i can still drag it around.
but the way it is now, is just if you paste something that it REALLY pastes it on the images, you can't move it around after you deselected it.
View 2 Replies
View Related
Aug 19, 2011
I'm working in Magi-cad, and have received a file from a colleague that has quit the office... Somehow he seems to have been able to switch the line-color within the same system and layer without using the normal line color / layer interface. So I was wondering if there are any other ways to separate color in the same layer and system?
View 2 Replies
View Related
Sep 5, 2011
what is the best proper way to exclude a layer and save it in a separate file. The think is that if i freeze the other layers the new file still keeps the other layers. This creates a problem in a conversion process to shp, that i need to do.
View 1 Replies
View Related
Apr 26, 2013
Is it possible to assign viewports in paper space to a separate layer?
Explanation: I have a paper space with one singular viewport. On the same paper space I added three other viewports that I scaled in but only need for one thing. Can I assign these viewports to a layer and apply them when I need them or do I have to make a seperate paper space for each task.
View 9 Replies
View Related
Dec 20, 2013
Is there any way to have more than one text placement inside of a single layer, but be able to maintain and move each of those separately from the others? From what I have seen, each new Text item gets its own new layer. If I want to document an image with seven points of reference, it's absolutely crazy that I have to maintain seven layers, each with an integer 1, 2, 3, 4, 5, 6, or 7. What would be much more maintainable is to create ONE layer and name it "MAP-NUMBERS" and then have seven integers placed into that one layer. I would then want to be able to move - say - "2" around separately from "4". Then making all of the numbers appear or disappear becomes as easy as hiding or showing one layer.
Is there a way to do this with any version of Photoshop?
View 10 Replies
View Related
