After input keywords on each photos located on server from my computer, it can be synchronized? Then ohter multiple computers can find the photos on server searching by keywords.
View 1 RepliesI'm using Lightroom 4.2 (I have used Lightroom since the very beginning) and I found following problem:
I am in the development moduleI select all photos in my folderI activate the automatic synchonizationI change the selected user defined lens from the Tamron 70-200/2.8 (which is wrong) to the correct Tamron 28-75/2.8 (-> there's a known problem in the automatic detection of the different Tamron lenses because of the ID in the lenses, so automatic detection doesn't work - tell me if I am wrong!)The progress bar shows that it's writing the changes to the selected photos (which takes a moment)Then it seems to be synchronized and I continue workingAfter some photos it shows the 70-200 mm lens to be selected again!
So obviously it didn't sychronize all selected photos!
My system: Windows 8 64-Bit computer, 16 GB RAM
I am new to Lightroom, and just purchased LR 4, upgraded to LR 4.1 and catolog my photo files. After this, I uploaded some photos from a SD card to a common folder (e.g. "Uploads 2012") on my hard drive using LR. This worked well. I then used Windows Explorer to drag/drop those files into their respective proper folders (there were many files on the card that were appropriate for different existing folders on my computer).
Here's where the problem starts. Prior to this uploading session, I had 297 files in a photo folder. Afterwards, I had 427 photos in this same folder. Using LR 4.1, I chose to "synchronize folder", then "import new photos" (it recognizes that there are new photos in this dialogue box). The program tells me this task is completed, but afterwards there remain 297 photos in the LR folder, and 427 photos in the location in Windows Explorer.
I have a Lightroom catalog on each of two different computers. Each of the two catalogs have imported photos from the same "Photos" folder on a server.
There is one main folder with hundreds and hundreds of sub folders.
The one catalog is showing 226,186 photos and the other catalog is showing 218,732 photos.
I've tried syncing the computer's catalog that has 7,454 less photos imported than the other computer but I always end up with two different totals on each computer. Very frustrating since both catalogs must match.
One computer is a Mac and the other computer is a PC (not sure that should make any difference).
It is quite obvious you can change the duration for any individual photo display time on the video track. I also see that you can stretch or compress the music track to fit time of the slides. However, this would distort the audio track to some extent. Is it possible to select some or all of the photos and automatically set an average time so the sequence will equal the play time of the audio (ideally one file, multiples, or complete audio track)? Also, Is there an upper limit on the number of photos that can be in the video track (obviously there would be an upper size limit for a given media that would be used)? What are some of the upper limits reported and have rendering issues resulted at some poin?
View 1 Replies View RelatedHow can I move many nested keywords back into the main listing of keywords? I was up late a few nights ago and never noticed that about 80 new keywords were being placed as (nested?) under another keyword. How can I get them back from under that keyword and into the main keywrod list?
View 5 Replies View RelatedLightroom has a collection containing all images without keywords.
As soon as I apply a keyword to images they instantly disappear from the collection. This is alright when I only want to apply a single keyword, but how do I stop it happening when I want to apply multiple keywords to the same image(s)?
Lightroom 4.1 trial, Windows 7
Adobe lightroom 4.4
MAC 10.8.3
I cannot synchronize to the catalog. The proccess never finish and don't find any photo.
I keep my photos in a folder, with hundreds of sub-folders.
I use Photo Mechanic for tagging, selecting, purging and meta-data management becuase it is very fast. Then I import into LR by asking it to synchronize with the top folder.
The problem is that LR4 (and LR3 before it) identifies a couple of thousand photos as being "new" and needing to be imported, then when I tell it to Import by clicking the "Synchronize" button, it grunts for a minute or two and then comes back and says "No photos or videos were found to import". So if there is nothing to import, why does it keep saying there are 2,563 "new" photos? It hangs on this same number for weeks at a time, though it has crept up from LR3 when it was only about 1600.
Why is Synchronize out of sync? How can I get it really sychronized and keep it synchronized?
I have the box regarding JPGs adjacent RAW checked so that they are treated as separate images. I've tried checked and unchecked and it has no effect on this problem.
I edited a picture and saved it in the same directory, as a PNG. On my next launch of Lightroom (2.1), I right-clicked on the folder and said "Synchronize folder". The file still isn't shown in Lightroom. If I pick "Show in Finder" on the folder, the PNG is right there and it opens up just fine in Preview when double-clicked.
View 17 Replies View RelatedWhen I select the Synchronize option, it says there are over 295,000 images, which is impossible. 15 to 20,000 at most. So I never start it, cause I'm afraid of what it's trying to catalog. Why would it be giving me such a number?
View 1 Replies View RelatedI took a trip yesterday and wanted to tag my images with gps data. I used my Samsung Galaxy 8.9 tablet's camera to record gps info by taking a shot at each location. The gps data is in the jpegs. I copied the images into my folder containing the images from my camera. I can use Photo GPS Extractor to view the image's location on Google Maps. The image location is also indicated on Google maps when viewing on the tablet. But, when I synchronise the folder to add the images to the Lightroom Library, the gps info is no longer available. The gps info is not available to ANY program after synchronising the folder in Lightroom. It seems as if Lightroom is removing that info from the metadata.
Windows 7 64bit, Lightroom 4.1
Some of my folders are in norwegian special characters (æøå). When I try to synchronize such a folder it can say that I have 152 new photos (all the photos in this folder) and that 152 photos are missing. When I use "Show in Finder" all the photos are ok. I don't like the folders to not be in sync, so I go on and synchronize the folders. Then I end up with two folders inside LR, but one is grayed out and contains 0 photos. I delete the grayed out one and continue to use LR. When I try synchronize folders right after this, it looks fine. But after a while the problem is back and I have to repeat the synchronizing. If I select "Update Folder Location" instead, the problem is fixed.
I use Lightroom 4.1 RC (but the problem was present in LR 4 as well). I have never used LR before, so I don't know about previous versions. My os is Mac OS X 10.7.3.
I have a project that for security reasons requires that media NOT be stored in a cloud. I'm trying to build a system that keeps a Lightroom catalog and the pictures synced between two or more Macs.
My current plan is to use Chronosync to synchronize catalogs on the Macs, and have all the media on a network server so that each Mac uses the same path to reference the original. But I can see two ways of this method breaking:
If both catalogs get modified simultaneously, or at least before a syn. [kind of just how it is, but could be managed with discipline]If some media is shot while the laptop is in the field, then I can sync the catalog and media when we get back, but the Lightroom catalog will still be pointing at the media on the local storage on the laptop. That second case worries me. Since Lightroom is nondestructive that avoids the truly dangerous case of someone on the laptop continuing to work on the wrong (local) copies of the pictures, not realizing that they're not updating the shared copies, but still, it seems that I should actually MOVE, not mirror the laptop data to the server when we get back into the network so that we are forced to locate the new media next time we try to access it from either computer.
Actually -- IS Lightroom truly nondestructive? Does metadata get changed in the DNG, or is all metadata stored in the catalog? Is there an option I'm going to need to set?
Is there a better way to handle this?
What is the best way to make relinking files go smoother? Maintain the folder structure relative to... what?
I can not import a new folder and can not synchronize an existing folder Lightroom 5.3 Windows 7/32
View 1 Replies View RelatedIs there a way to apply develop presets when you synchronize a folder? I want the new images that are synchronized to have a develop preset applied.
View 4 Replies View RelatedIn Library module, Fodlers Pane, I have a Local Disk (D:)My Pictures folder. When I do "Synchronize folders" on My Pictures, not only does LR un-hide the parent folder of My Pictures (which I had previously hidden), but it also adds to the library all the sub-folders within that parent folder, i.e. all siblings of My Pictures. I only would like to synchronize the content of My Pictures (and its sub-folders), I do not want to also add all sibling folders of My Pictures and their content to the library. Any way I can do that?
I am running LR 4.3 under Windows 7.
Recently upgraded to LR 4.1.The copy and paste settings and also synchronize setttings in LR 4.1 has stopped working. Rebooted, nothing new added.
View 14 Replies View RelatedLightroom 3.6 is not finding my newly exported .jpg files when I use Synchronize Folder. This has been working for me since I got LR many months ago, but today after I make adjustments to a .cr2 file and export the file to a .jpg file in the same folder, synchronize folder isn't finding the new .jpg files. Interestingly I used Windows Live Photo Gallery to copy/resize one of the .jpg files I'd exported, and LR *does* find that file, just not the originally exported one.
View 2 Replies View RelatedI am having this problem whenever I synchronize a folder that images have been added into.
Example: I have a folder of images in LR; I export all those images with a watermark, resized, etc. into a separate folder of proofs; even though I performed that batch process using LR, for some reason the app still won't see those images until I synchronize; when I do synchronize, it is shifting the color temp to +8 and the tint to -11; I then have to go back and undo that color temp shift.
How do I get LR to stop changing the color temp of images when synchronizing?
I believe that only exporting the smart collection settings is not enough. I have in my collections a hierarchy of collection set, collection and smart collection that works with my workflow:
-special [CS]
-- pano [SC]
-- fuse [SC]
-themes
-- holiday... [SC]
-- ...
- worklist [CS]
-- dominant color [CS]
--- dominant color to review [SC]
--- dominant color reviewed [C]
-- weather [CS]
etc.
-- geography [CS]
etc.
Being able to export the hierarchy from one specific node would be great when I switch from catalog to catalog. After all, smart collections content can be re-created.
I've seen that in the DB, there are these two tables that would need to be 'copied' : agLibraryCollection & agLibraryCollectionContent. Their IDs when importing in the new catalog would probably pose a problem if we were just to import them like that.
On the other hand, there are in the SDK some functions to go through the collections and some functions to create collections, collection-sets, smartCollections...
Would it be difficult to include such a functionality in a future release ?Would it be difficult or possible to write in the mean time a plugin that would do just that: import/export collection hierarchies ?
I would like new functionality on handling tags for filtering/searching photos (as a replacement of the `advanced search`)
The goal is, to use the same Tag-structure to tag photos and also to filter them (most likely as you could do that with PSE 9 ) .
I don't want this `advanced search` window, that takes a lot of space - I want to see my photos, not a hug program border..
I copy a .dwg to my remote computer and open it. Then .dwl and .dwl2 are created in same local folder as the .dwg I just opened localy. Then I copy the local .dwl and .dwl2 files back to the remote server in the same location I received the origional .dwg from. Why are those files not locked now from everybody on the network that I am remotly away from?
View 7 Replies View RelatedAs far as I can tell, Copy Metadata and Synchonize Metadata do the same thing. Is there a difference in what they do?
View 1 Replies View RelatedIs there a way for LR4 to export to my ftp server?
View 1 Replies View RelatedI have just installed a new computer when my old one died. I had everything backed up and have managed to successfully restore my lightroom catalogue.
I can see all my photos and all the adjustment history and I can see my library of keywords. However, none of my photos show the key words that I previously assigned to them.
I am not sure whether there is a file that I need to restore from the backup somewhere.
Our workgroup is considering getting Lightroom to access files. We would like to be able to use it with the files we share on a server. Is this possible or does Lightroom only work with files stored on the hard drive of one computer?
View 9 Replies View RelatedWhen i try to upgrade to LR5 I see the keywords are missing. Eevn when I import them again, no keywords...With about 275.000 images keyworded in LR3-4...
View 6 Replies View RelatedI am very happy with some 200 keywords that I use in PSE10 under Win7/64 on over 20k images. Is it possible, in LR4, to pick up files with keywords written to metadata, and work with them in LR4 (selection, editing, etc.) WITHOUT damaging or "upgrading" the PSE10 catalog? If yes, could PSE10 pick up keywored changes made in LR4?
Or do you have to commit to one program or the other?
Why do keywords sometimes "jump" out of the master tag folder and line up alphabetically outside their assigned set?
View 1 Replies View RelatedSome how my keywords got scrambled. The first thing I'd like to do is move a keyword from its new (incorrect) location as a sub-keyword back to being a parent keyword of a hierarchy. I have tried dragging and dropping it but it immediately returns to its incorrect location. I considered creating a new keyword as a parent keyword (the same word), then open the images linked to the misplaced keyword and drag all the images to the newly created parent keyword. Then empty and delete the misplaced sub-keyword. But...I fear loosing links to collections, vitual copies, etc. for all the images. best method for returning the keywords to their original placement in the hierachy.
View 7 Replies View Related