VideoStudio :: Change Video Size
Jun 21, 2013
I'm new to Corel. I have done some video editing. I have used Premiere in the past. I am importing dv video and the size captured is 740 x 480 from my Sony DV camera. It is an older camera. First Digital Hi-8. When I produce a video and play it in a player on the pc it is displayed in whatever size I want, including full screen. When I burn a dvd it only plays in a small window, I'm assuming 740 x 480. Is there a way to produce a video that will take up the entire tv screen. I'm only concerned with 4:3 ration, not widescreen at this time.
View 8 Replies
ADVERTISEMENT
Nov 6, 2013
I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
View 3 Replies
View Related
Jan 21, 2012
With the project settings at 16:9 it is possible to insert photos of a different ratio and the customize pan and zoom will allow them to the cropped to 16:9.
I thought I had done the same thing with 4:3 video clips in a 16:9 project by using Video Pan & Zoom in the filters [and I tried the other crop filter as well], but maybe not, as when I tried to do this with a 1280x1040 AVI clip from a time lapse camera the only cropping box it would offer was in the same ratio as the clip. I also tried it with the same clip converted to mpeg, with the same result.
crop a video clip to 16:9 in a 16:9 project in VS14?
View 10 Replies
View Related
Feb 9, 2013
I did not know there would be a size limit to fit a video file to a DVD. I thought the premise would be to fit any size video file to a DVD, and the the sell-out would be the larger the video file the poorer the DVD quality.
I got two error messages:
"The miminum size be reducing the bit rates still cannot fit once disc."
"Convert step got some problems."
What are the minimum requirements for fitting a video file to a DVD?
View 2 Replies
View Related
Jul 13, 2012
I don't understand why a video increased in size so that I cannot burn a DVD. The video was originally a 1 hour 26 min TV show on a VHS tape. I used a VCR/DVD combo unit to create a DVD, and created a MPEG2 on a hard drive using a conversion program. The size of the DVD is 2.89GB and the size of the MPEG2 is 2.85GB.
I imported the MPEG2 into a library folder in VS Pro X5, and dragged it into the video track. A right click to look at Properties in both the library and video track shows a size of 2,998,518KB, which is 2.86GB. I went straight to Share without adding titles or anything to the video. I selected Create a Disc and took the basic defaults for the menu in Share and didn't edit any of the menu text. When I get to the Output section, the Required/Available Disc Space is in red and has the following information:
5.08GB/4.38GB
(5.45GB)/(4.71GB)
Where did I get the 2.23GB in video growth? I saw a post from Jan 2012 that mentioned data rates for a 60 min. and 120 min. DVD. My Properties shows a data rate of Variable bit rate (Max 6124kbps). Could this be a reason for the growth? If so, how do I change it?
View 8 Replies
View Related
Jan 23, 2014
How to change Video Size !6:9 video to 4:3 in premiere pro
View 3 Replies
View Related
Dec 6, 2012
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
View 3 Replies
View Related
Dec 7, 2010
I made a 8GB video in PAL sometime ago. Some of my relatives in Canada cannot view it. As I do not have the original footage, I imported the DVD into X3 and tried to create a DVD in NTSC format. The final size came to 9.3 GB and it appears X3 will not burn or create VIDEO_TS folders if the size is more than 9GB. I was hoping I could use DVDShrink to reduce the file size to fit a 8GB disc once the VIDEO_TS folder is created on the computer.
View 7 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 23, 2013
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies
View Related
Jan 17, 2013
I have a video clip in 4:3 format that I want to insert in a video project in 16:9 (project properties set at 16:9). How could I do that?
I know that there will be black bands above and below the converted project. However, when I inserted the 4:3 video clip in the 16:9 project, it stays in 4:3.
View 1 Replies
View Related
Mar 31, 2012
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
This happens to Video Studio Pro X3 and X5.
View 12 Replies
View Related
Jun 25, 2011
how to make my edited mp4 video files smaller so that They upload and download much quicker. I did some editing to some MPEG-4 video files and when I was finished I found out that the file sizes of each video blew up to huge numbers. During the editing I did add some transitions and .MPEG photo images. I didn't think that the video size would grow to that amount. I really would like to keep the MPEG-4 format for the convenience to the viewer. I just need to have it in the smallest file size possible. how I can get my "MP4 H264 - MPEG-4 AVC Resolution 640x480" videos to an acceptable file size?
View 8 Replies
View Related
Feb 3, 2012
First, I have lots of files with different properties ( SD and HD files) and all files have different properties. My goal is to edit each individual file, save as individual project file (VSP) and create individual final video file, however with an option. The option is to change any property of that individual video file.
Since creating template would not work with all different video properties, how else should I create a final video file to be able to change only the video bit rate (VBR)?
After editing a file, in when I select “SHARE/CREATE VIDEO FILE/SAME AS FIRST VIDEO CLIP”, the “OPTIONS” does not give me the option to change any individual property. That is, the video files that have too high VBR, I would like to reduce their individual VBR only and leave the rest of the other properties alone.
View 3 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Oct 21, 2007
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies
View Related
Aug 11, 2011
When my project is rendered... and put on a DVD, is it possible to later change its narration to another language? I ask since I notice that, once rendered, the music, video and narration tracks become one. Is there a way of later separating them, say for changing the language of narration for viewing in another country?
View 14 Replies
View Related
Nov 25, 2010
How does one change the thumbnail for a video clip? By default, VS Pro X3 seems to use the first frame of the clip. I would like to choose the frame. Is that possible in VS?
View 7 Replies
View Related
Apr 7, 2011
I have created and burnt a video and find that after burning it plays fine on a computer but not on television. Opening the video in Pro X3 and checking the Properties I find that it is in NTSC profile. Obviously not a lot of use in the UK. The television tells me that the DVD is an incorrect DVD, which I would expect if it's burnt for viewing on a computer or in NTSC format.
How can I change this to PAL DVD? When saved it is saved in Corel VS, which I would expect. When I go into the Library to obtain the video there appears nowhere where I can change it to PAL.
View 2 Replies
View Related
Jun 14, 2011
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies
View Related
Mar 26, 2012
how to change the default options when creating a video?
I keep forgetting to turn off "smart render" and "non-square pixel rendering" in the options dialog when I convert.
Also it would be nice to be able to turn on Dolby 5.1 by default as well.
View 2 Replies
View Related
Oct 30, 2012
I am working on a new project in X5 and I want to change character size in Title mode. When I click on the box with 30 as default size I get only a white line under this box instead of a box with the different character sizes. IWhen I want to apply animation to the text than I got also a white line under the box where the different types of animation should be shown.
View 1 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Mar 24, 2009
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies
View Related
Feb 24, 2011
I create a text box and paste in the info into it. Now I want to resize the box to fit the space available but the handles end up changing the font size. I need the software to change the auto line feeds as the box's size is changed.
View 6 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Apr 27, 2012
The feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies
View Related
Oct 17, 2013
Mleader arrow head didn't change size when change the scale on Object property?
The Arrow head size didn't change corresponding to the scale, i included the pic below, the top picture, the arrow head was set at .18" but was really small when i plot out, so i wanted to make it bigger, when i changed to .50" or .75" or even 1" the arrow head became even smaller than .18". Only when .18" than the arrow side is legible
Mleader.jpg
View 9 Replies
View Related
Mar 18, 2011
I discovered via a tutorial video making a transparent title in PowerDirector 9 Ultra video editor. The demonstrator used Paint.Net to create a 16:9 ratio canvas... but since installing your program I cannot figure out how to create a canvas to match these 2 video sized canvases.
View 5 Replies
View Related
Mar 1, 2014
I'm looking for a way to edit a video like how you would edit a photo in photoshop as I would like to only move one side of the video (As in the left or right) and not both of them as im trying to line it up behind a photo.
View 2 Replies
View Related
