VideoStudio :: Why Video Size Increases
Jul 13, 2012
I don't understand why a video increased in size so that I cannot burn a DVD. The video was originally a 1 hour 26 min TV show on a VHS tape. I used a VCR/DVD combo unit to create a DVD, and created a MPEG2 on a hard drive using a conversion program. The size of the DVD is 2.89GB and the size of the MPEG2 is 2.85GB.
I imported the MPEG2 into a library folder in VS Pro X5, and dragged it into the video track. A right click to look at Properties in both the library and video track shows a size of 2,998,518KB, which is 2.86GB. I went straight to Share without adding titles or anything to the video. I selected Create a Disc and took the basic defaults for the menu in Share and didn't edit any of the menu text. When I get to the Output section, the Required/Available Disc Space is in red and has the following information:
5.08GB/4.38GB
(5.45GB)/(4.71GB)
Where did I get the 2.23GB in video growth? I saw a post from Jan 2012 that mentioned data rates for a 60 min. and 120 min. DVD. My Properties shows a data rate of Variable bit rate (Max 6124kbps). Could this be a reason for the growth? If so, how do I change it?
View 8 Replies
ADVERTISEMENT
Jul 25, 2008
I am a newbie - so sorry if this is a dumb question. But when I open a JPG file with CS3 it will make it very large. For example - when I open a 2.75MB JPG file taken from a digital camera, CS3 somehow increases the file to 14 MB. When I open a 2MB JPG image sent from a graphic designer, CS3 shows the image as 31MB.
View 1 Replies
View Related
Aug 25, 2010
Last week one of my Lightroom databases had a size of 400MB. After I installed some new hardware components last weekend I continued to work in that same database and three days later the size had increased up to 800MB. I didn't import any new images. I just worked on several files, added some Adjustment Brushes and created 1:1 previews for a small part of the images in this catalog.
What is causing this increase in file size? Which info is actually stored inside these lrcat-files? What about the History, where is that info stored? Can I create a new catalog from scratch and keep the settings and changes, using Export as Catalog?
View 22 Replies
View Related
Feb 2, 2013
I am working on a x5 and file size seems to be very less approx 553kb when saved but when made a conversion to 12 version it is increasing to 24mb... how may sought this out by keeping the file size low..
Also i wonder what made the file size to increase so much.i converted all fonts to curves too.. decreased the resolution and tried but nothing seemed to decrease the file size.
View 1 Replies
View Related
Feb 11, 2011
I am using AutoCAD Civil 3D 2009.I have a project files suddenly file size becomes @ 10 MB after saving. Even Titlblock size is 7 MB.
I had installed a latest update over my system as well i tried to clean a file as per below thread. URL....After doing this file size reduced to KB. But if open it again and saved the file size go to MB.
View 3 Replies
View Related
Jun 21, 2006
Why does the image processor increase the filesize of pictures? I'm trying to resize a bunch of jpg's which are between 5-10kb, and when put through the image processor to save as jpg's with a setting of 0 quality, they come out as about 25kb each, even though the dimensions are smaller.
View 1 Replies
View Related
Mar 9, 2012
The issue that I'm having really resides in AutoCAD 2012 after the file has been opened and saved in Civil 3D 2012.
For example, I can use AutoCAD to open a new or existing drawing that has never been used in Civil 3D. I'll run two audits, purge all twice, purge regapps, reset the scale list, then save the drawing. If I open it in AutoCAD again, the file size remains the same.
If I open it in Civil 3D, the file size increases that one time, which is fine. No matter how many times I open it and run the above commands, the file size doesn't change any more than 1 Kb while in Civil 3D.
BUT if I were then to open that same drawing in AutoCAD after closing it out of Civil 3D, then save - it will increase the file size by almost 100 Kb. No matter how much I run the previously mentioned commands the file size will not decrease in size. Additionally, every time I open that particular drawing in AutoCAD again and save it, it increases by another 100Kb+/-. These files are not very large, but I have wblocked some out to save more than 10 times the space.
I've seen similar posts, but they were regarding older versions and seem to be a little different than the problem we are experiencing.
View 4 Replies
View Related
May 23, 2013
We use LT 2012, and recently we started having issues with file size.
Some of our drawings went from 1.5MB to 12MB after saving.
We tried saving as DXF then PURGE, -PURGE to reduce the size but always comes back.
Now, in one of the drawings I did PURGE, AUDIT, -PURGE and erased everything in the drawing, file is still 1.8MB.
View 1 Replies
View Related
Nov 6, 2013
I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
View 3 Replies
View Related
Jun 21, 2013
I'm new to Corel. I have done some video editing. I have used Premiere in the past. I am importing dv video and the size captured is 740 x 480 from my Sony DV camera. It is an older camera. First Digital Hi-8. When I produce a video and play it in a player on the pc it is displayed in whatever size I want, including full screen. When I burn a dvd it only plays in a small window, I'm assuming 740 x 480. Is there a way to produce a video that will take up the entire tv screen. I'm only concerned with 4:3 ration, not widescreen at this time.
View 8 Replies
View Related
Jan 21, 2012
With the project settings at 16:9 it is possible to insert photos of a different ratio and the customize pan and zoom will allow them to the cropped to 16:9.
I thought I had done the same thing with 4:3 video clips in a 16:9 project by using Video Pan & Zoom in the filters [and I tried the other crop filter as well], but maybe not, as when I tried to do this with a 1280x1040 AVI clip from a time lapse camera the only cropping box it would offer was in the same ratio as the clip. I also tried it with the same clip converted to mpeg, with the same result.
crop a video clip to 16:9 in a 16:9 project in VS14?
View 10 Replies
View Related
Feb 9, 2013
I did not know there would be a size limit to fit a video file to a DVD. I thought the premise would be to fit any size video file to a DVD, and the the sell-out would be the larger the video file the poorer the DVD quality.
I got two error messages:
"The miminum size be reducing the bit rates still cannot fit once disc."
"Convert step got some problems."
What are the minimum requirements for fitting a video file to a DVD?
View 2 Replies
View Related
Dec 6, 2012
I am trying to overlay a few videos side by side where I crop each video to a third of its size only showing what I cropped per video. I used the crop fx but the borders are solid black and the videos behind them do not bleed through. Is there a way to crop the videos ( mask them ) so that only a portion shows and the other overlays show through? ( like three slices ).
I could just overlay one over the other but the subject is not always on the left or right side of the video and may be centered so I'd have to trim the sides.
View 3 Replies
View Related
Dec 7, 2010
I made a 8GB video in PAL sometime ago. Some of my relatives in Canada cannot view it. As I do not have the original footage, I imported the DVD into X3 and tried to create a DVD in NTSC format. The final size came to 9.3 GB and it appears X3 will not burn or create VIDEO_TS folders if the size is more than 9GB. I was hoping I could use DVDShrink to reduce the file size to fit a 8GB disc once the VIDEO_TS folder is created on the computer.
View 7 Replies
View Related
Oct 8, 2011
I thought the best way to construct my video would be to 'cut' out all the sections of video I wanted to use, and save them in the library. When I had them all, I could then bring them down to the timeline where each needed to go. The videos I am working from are 512x288, and when I try to use the 'save trimmed video' function, it comes back saying my frame size is not per the settings.
I haven't seen a way to make the project accept a different frame size, that option is grayed out under preferences. Is there a way for me to cut out the sections I want and save them individually?
View 4 Replies
View Related
Jul 23, 2013
I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."
View 5 Replies
View Related
Mar 31, 2012
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
This happens to Video Studio Pro X3 and X5.
View 12 Replies
View Related
Jun 25, 2011
how to make my edited mp4 video files smaller so that They upload and download much quicker. I did some editing to some MPEG-4 video files and when I was finished I found out that the file sizes of each video blew up to huge numbers. During the editing I did add some transitions and .MPEG photo images. I didn't think that the video size would grow to that amount. I really would like to keep the MPEG-4 format for the convenience to the viewer. I just need to have it in the smallest file size possible. how I can get my "MP4 H264 - MPEG-4 AVC Resolution 640x480" videos to an acceptable file size?
View 8 Replies
View Related
Aug 23, 2011
When first making the video in Edit mode, is there any way to see the final output size before or after selecting Create Video File before the file is created.
If I choose Create Disk it will show the output size.
If not what would the maximum running time be for DVD output?
View 10 Replies
View Related
Oct 21, 2007
I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.
View 4 Replies
View Related
Jun 14, 2011
I am using photos for a slideshow. How do you resize a photo or video on the overlay track to the exact size on the timeline? I know you can use the resize handles but is there a faster way?
View 14 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Feb 24, 2011
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies
View Related
Jan 15, 2013
I reseted my illustrator settings because it was having some problems, the settings I reset was changed everything back to pixels. I am working with small graphics that need to fit within 20x20 pixels
the problem is, when I resize something, example: 1x5, and I up the 1 to 2, it will increase it to 2 pixels from the middle of the object making it's coordinates ?.5 instead of a round number. I do not want to turn on snap anything because it worked just fine before I reseted my settings, it doesn't show it as being off at .5 but when I select multiple objects that the coordinates are at whole numbers, combines they make a number .5.
What I want - instead of the object increasing, when I up its size, from the middle of the object, I want it to increase down and to the right, keeping it's coordinates the same.
View 2 Replies
View Related
Feb 16, 2011
Is there any way to push the video in the video track after the title track is completed ....
View 4 Replies
View Related
Jan 23, 2014
How to change Video Size !6:9 video to 4:3 in premiere pro
View 3 Replies
View Related
Mar 18, 2011
I discovered via a tutorial video making a transparent title in PowerDirector 9 Ultra video editor. The demonstrator used Paint.Net to create a 16:9 ratio canvas... but since installing your program I cannot figure out how to create a canvas to match these 2 video sized canvases.
View 5 Replies
View Related
Mar 1, 2014
I'm looking for a way to edit a video like how you would edit a photo in photoshop as I would like to only move one side of the video (As in the left or right) and not both of them as im trying to line it up behind a photo.
View 2 Replies
View Related
May 30, 2011
Is there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
View 2 Replies
View Related
Jul 20, 2013
In photoshop, I've created a new document in film & video size as shown below.
After I've done my design as saved, I bring it to preview in premier pro. The size didnt match my video settings. how to solve this?
in photoshop view:
Saved image view:
View 1 Replies
View Related
Mar 2, 2014
I'm new to video editing and know little about the program I am using (Adobe Premiere Pro CC). How I can add the full size video or pics to the time line. It appears whenever I add something from my Gopro 3 HD camera I only get a partial of the video / pic.
View 3 Replies
View Related
