I am a newbie - so sorry if this is a dumb question. But when I open a JPG file with CS3 it will make it very large. For example - when I open a 2.75MB JPG file taken from a digital camera, CS3 somehow increases the file to 14 MB. When I open a 2MB JPG image sent from a graphic designer, CS3 shows the image as 31MB.
View 1 RepliesWhy does the image processor increase the filesize of pictures? I'm trying to resize a bunch of jpg's which are between 5-10kb, and when put through the image processor to save as jpg's with a setting of 0 quality, they come out as about 25kb each, even though the dimensions are smaller.
View 1 Replies View RelatedI am working on a x5 and file size seems to be very less approx 553kb when saved but when made a conversion to 12 version it is increasing to 24mb... how may sought this out by keeping the file size low..
Also i wonder what made the file size to increase so much.i converted all fonts to curves too.. decreased the resolution and tried but nothing seemed to decrease the file size.
I am using AutoCAD Civil 3D 2009.I have a project files suddenly file size becomes @ 10 MB after saving. Even Titlblock size is 7 MB.
I had installed a latest update over my system as well i tried to clean a file as per below thread. URL....After doing this file size reduced to KB. But if open it again and saved the file size go to MB.
The issue that I'm having really resides in AutoCAD 2012 after the file has been opened and saved in Civil 3D 2012.
For example, I can use AutoCAD to open a new or existing drawing that has never been used in Civil 3D. I'll run two audits, purge all twice, purge regapps, reset the scale list, then save the drawing. If I open it in AutoCAD again, the file size remains the same.Â
If I open it in Civil 3D, the file size increases that one time, which is fine. No matter how many times I open it and run the above commands, the file size doesn't change any more than 1 Kb while in Civil 3D.Â
BUT if I were then to open that same drawing in AutoCAD after closing it out of Civil 3D, then save - it will increase the file size by almost 100 Kb. No matter how much I run the previously mentioned commands the file size will not decrease in size. Additionally, every time I open that particular drawing in AutoCAD again and save it, it increases by another 100Kb+/-. These files are not very large, but I have wblocked some out to save more than 10 times the space.
I've seen similar posts, but they were regarding older versions and seem to be a little different than the problem we are experiencing.
We use LT 2012, and recently we started having issues with file size.
Some of our drawings went from 1.5MB to 12MB after saving.
We tried saving as DXF then PURGE, -PURGE to reduce the size but always comes back.
Now, in one of the drawings I did PURGE, AUDIT, -PURGE and erased everything in the drawing, file is still 1.8MB.
I don't understand why a video increased in size so that I cannot burn a DVD. The video was originally a 1 hour 26 min TV show on a VHS tape. I used a VCR/DVD combo unit to create a DVD, and created a MPEG2 on a hard drive using a conversion program. The size of the DVD is 2.89GB and the size of the MPEG2 is 2.85GB.
I imported the MPEG2 into a library folder in VS Pro X5, and dragged it into the video track. A right click to look at Properties in both the library and video track shows a size of 2,998,518KB, which is 2.86GB. I went straight to Share without adding titles or anything to the video. I selected Create a Disc and took the basic defaults for the menu in Share and didn't edit any of the menu text. When I get to the Output section, the Required/Available Disc Space is in red and has the following information:
5.08GB/4.38GB
(5.45GB)/(4.71GB)
Where did I get the 2.23GB in video growth? I saw a post from Jan 2012 that mentioned data rates for a 60 min. and 120 min. DVD. My Properties shows a data rate of Variable bit rate (Max 6124kbps). Could this be a reason for the growth? If so, how do I change it?
Last week one of my Lightroom databases had a size of 400MB. After I installed some new hardware components last weekend I continued to work in that same database and three days later the size had increased up to 800MB. I didn't import any new images. I just worked on several files, added some Adjustment Brushes and created 1:1 previews for a small part of the images in this catalog.
Â
What is causing this increase in file size? Which info is actually stored inside these lrcat-files? What about the History, where is that info stored? Can I create a new catalog from scratch and keep the settings and changes, using Export as Catalog?
I recently upgraded from CS6 to CC. When I open a psd file, it opens at 100%, but the window is small with scroll bars. I have plenty of screen real estate, so that's not the problem. I have looked everywhere and can't find how to make the default 100% showing the entire image.
View 7 Replies View RelatedWhen I drag a photo file to Photoshop, it opens in a size significantly smaller than the workspace. (This is especially true with vertical [portrait] photos.) Therefore, every time I open a photo (and I do this typically hundreds of times a day...), I have to drag the lower right corner way out to enlarge the frame, and then I have to scroll the mouse wheel to make the picture expand to (approximately) fill the frame. Only then can I see it well enough to make the required ajustments to the file. Isn't there a way to tell Photoshop how large I want the photos to appear in the workspace, so it opens every new photo file to the same size? I am using Photoshop CS (not CS2 or CS3).
View 9 Replies View RelatedImages that are opened or psds that are imported are resized into an artboard that is smaller then the image. With raster image formats, the following behavior occurs:
Â
For a jpg that is 1000x800px an artboard is opened at 1000x800px and an additional artboard at 360x288px with the actual raster image is created.
Open an .AI file saved on a netapp or windows shared directory with full permissions (prior to saving I noted that all security groups are intact in file properties as we have 2 for read and write access)Make any changesTry to save and get the prompt: Can’t save preview, but all other information was saved successfully. The file couldn’t be found. ID = -43 (file is now corrupted and looking in security group file properties the 2 security groups designated for read and write access for the directory is now gone and shows an unknown security group????)
Save as works without a problem. Try to press save again and get This file has been modified outside Illustrator. Do you want to continue?Continue and prompted This file cannot be foundObviously the file preview icon goes from a thumbnail of the file to a generic iconWhen I try to open the file I get: Can’t open the illustration. The file is locked or in use.It led me to believe the issue was either OS X or CS5.5. I was able to open the file fine on Windows Illustrator CS5.5 make a slight change and resaved (which fixed the file and opens again in OS X and read/write security groups show up again?)Optionally, I was also able to fix the file to where I could open it in OS X by simply giving myself Read/Write access to the file from Get InfoÂ
Notes:No issues with the same file in 10.7.x.
I've tested on all available Mac Pro / MacBook Pro machines and issue doesn't seem to happen on MacBook Pro retina?Photoshop and InDesign not affected
When someone opens a file on our server just to look at the image and then closes it without making any edits and does not save, the file has a new modification date and act like it was saved. How can I keep this from happening?
View 1 Replies View RelatedI recently upgraded to a new computer and I am experiencing strange black bands blotches when opening many of my old Photoshop files or even when opening common files types (jpg/png). The problem doesn't occur with all file, some open just fine. The distortion only appears within Photoshop,
when I try to save the file for display everything looks fine as long as I don’t open the saved file in Photoshop. I feel like I’m missing something basic but I’ve used PS for years and never encountered this. All of my profile settings are exactly the same as they were on the old computer (basically default) so I don’t think there is a mismatch.Â
I cannot see my image after opening in PS6. The tab shows the file name and I can see the image in the tile when I go to "File-Open".Â
View 1 Replies View RelatedI need to include several pages of pdfs in a book. The pdfs are scanned text documents, image only, with no security applied. When I open the pdf on my mac pro with photoshop cs6, I can make adjustments in the curves dialog, but when I close the dialog the adjustments disappear. The history pallette shows the action, but nothing happened. Also can make visible changes in a curves adjustment layer, but when I flatten the image the changes disappear. I've tried opening the pdf as grayscale, rgb, and cmyk; same result. I've also saved it in several different formats, then reopened it; same result. The file initially opens as a background layer with a locked symbol in the layers pallette. If I duplicate the layer and delete the background, the locked symbol disappears, but photoshop still won't accept changes made in the curves dialog. I tried it with cs4, and had a friend try the same things with on a pc; same result. Levels adjustment won't work, either.
View 4 Replies View Relatedif there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies View Relatedi've just been using the brush tool to draw and paint around with, and today when I tried to open up a saved project from last night, It came up all blurry and very undetailed compared to when i saved it. I think it might be the saved file was 16 bit, and maybe it's opening it up in 8 bit which is making it blurry? Or maybe my computer can't handle the 16bit and my resolution on the saved file was too high?
Also, I was wondering some recommended starting specs (like when I open a new window)
I have installed Photoshop CS4 x64 on Windows 7 x64 (RC) and when I open an image (any image file), it is not displayed in Photoshop. This is on a fresh install on a new PC. I see the tab (and the window) that photoshop displays for an image, but there is no image data in it. The only way I can see the image is if I drag the tab (converting it into a window), once I drop the window, the image data is again not visible. I am getting the same issue with Photoshop CS4 (x86). Has anyone else seen this before? I have updated my video card drivers, and I installed the drivers for my monitors (even though I don't believe in monitor drivers!).
View 8 Replies View RelatedI have simple line drawings in illustrator (outlines of clothes) that I wish to open in photoshop to add colour and effects to. When i have tried to copy and paste (as normal paste, smart object, pixels, path and shape layer) the quality is lost.
I have also tried to open or place the file in photoshop as a .psd, .ai , .pfd and still the quality is lost.I have saved with different resolution settings too, but it always loses quality when it is opened in photoshop.
Â
Is there any way to have a clear line drawing like it is in illustrator in photoshop?
How can I locate file recently opened photos in photoshop. Photos from like 4 days ago.
View 4 Replies View RelatedWhen I try to open any file in PS6 (jpg, png, psd), it shows open in the history but the file doesn't show up on the work space. I have never had this happen to me before! I've updated everything available, too.
View 2 Replies View RelatedCan a jpeg file be opened in raw format in photshop elements 11?
View 4 Replies View RelatedWhen I import PRN file in CrelDRAW X4, facing this error:
"An error occurred while processing Output.prn. The file cannot be opened."
I recently created a file in Illustrator CS6 (Creative Cloud version), and saved it as PDF with illustrator editing capabilities preserved. It saved fine, but when I opened the file in Illustrator CS6 again for more editing today, it gave me an earlier version of the file instead of the latest version that I saved last night. However, the file opened correctly in Quick Look, Preview and Photoshop CS6. I've tried to make a copy of the file, and open the copy in a different folder, as well as deleting illustrator preferences.I don't want to spend another 1.5 hours to redo things that I've done.
View 1 Replies View RelatedI am trying to open Lightroom 4 from my desktop and it keeps giving me this message:The Lightroom catalog named "Lightroom 4 Catalog" cannot be opened because another application already has it opened.
View 1 Replies View Relatedtxl058.cdr
Having issues with this file though it is .cdr but still can't be opened.
i have my layer named in Chinese in max 2012,and i opened the same file in max 2013, and the layer name got garbled?is this a bug or how do i fix it?
View 2 Replies View RelatedI have scenario where user can open the drawing using filepath like given below
Application.DocumentManager.Open(filePath, IsReadOnly);
And it is working fine.
I should allow to open the file, if file is already opened state.
I have spent the entire day trying to solve this and I finally found a fix but not the cause. I have tried all the typical ways to sync/read/render to see the xmp data in LR.
Â
After all of this I found the only way for me to see the xmp data is to open the xmp as a text document then save it go into lightroom read metadata and it shows up. This obviously isnt a workable solution for thousands of files so I need to find a cause.
Â
So a little info. I'm using LR5 on a windows. I edit clients images then send them the xmp files with those edits. I have one client thats photos when imported do not show metadata or develop adjustments. This is the only solution I have found to see the info. I believe they are using LR 4 and a MAC.
Â
Is it possible that the problem is the original files are saved on a mac then transfered to my windows machine.
I have a lot of files in the extension ogg that I need to edit using premiere pro cs 5.5.After loading the file receives the information:"The file can not be opened because of header error".I installed already URL....And further receives the above error.The information that I read from MediaInfo:
General
Complete name                     G:3-4.ogg
Format                                  : OGG
File size                               : 1.68 GiB
Â
Video
IDÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â : 29297 (0x7271)
Format                                  : Theora
Width                                   : 2 560 pixels
Height                                  : 1 920 pixels
Display aspect ratio             : 4:3
Frame rate                           : 30.000 fps
Compression mode              : Lossy
Writing library                       : Xiph.Org libtheora 1.1 20090822 (Thusnelda)
Â
Is it possible to load a file to the premier pro without converting them?