When someone opens a file on our server just to look at the image and then closes it without making any edits and does not save, the file has a new modification date and act like it was saved. How can I keep this from happening?
View 1 RepliesIs it possible, in AutoLISP, to code something that will save the current file (whatever it may be, assume ..dwg or .dxf, into R2000 .dxf?
View 9 Replies View RelatedI created an action that:
Â
Opens a psd document
resizes to a specific height
Saves for web and devices as a jpeg high quality
Â
When I run the batch on that action it seems to be simply opening the psd document and saving as psd in the output folder, without converting to jpg.
I've got about 4 hours of work into solving the dreaded "Photoshop: CS6 saves in wrong file format on MacOS when trying to load obsolete plugins" (Aside: I don't suppose I can send Adobe an invoice for billable hours?? Naw, never happen.)
Â
I could still not get CS6 PS to open and "save as" correctly. All of my plug-ins were current and the only linked ones were reinstalled after PS was updated. URL.... I saw multiple mentions of the "Standard Multiple Plugin" as a possible source of the problem. Found this file in /Library/ Application Support/Adobe/Plug-ins. (Mac OS X 10.7.5) Removed the file and PS does what it should: defaults to all file formats on open and allows any format to be selected on "save as."
Â
Get Info identifies this file as an Adobe plugin ver. 12.0.2 created and modified 7/18/11 obviously well before I got CS6. It also shows an Adobe copyright (2003-2010) message so this is NOT a third party plugin, nor is it a bad symlink, nor is it an outdated 3rd party plugin. Since this was placed there by the Adobe install and not modified by the CS6 upgrade, I can only conclude that Adobe wanted it there.What - if anything- will happen without this file in place and if it is necessary where does one obtain a new one?
Â
I did not copy any old plug-ins to the new program nor did I have any bad aliases nor did I have multiple copies of anything.
I have an Excel file linked to a Table which has 3,400 lines. When the Table is unbroken a File Save takes 30 seconds. When the Table is broken it takes 30 Minutes to save. Makes the breaking feature for large table unusable.Â
View 3 Replies View RelatedI'm using Coral Draw Graphics suite X5 built 15.2.0.686 SP4 (all available updates installed) This is a bug I have detected.
Start a new CorelDrawFile and import a .jpg,after putting e.q. some arrows on it I choose "export" and exports a .tif - file to a folder.
For further manipulations I also save the .cdr - file to another Folder. Insofar everything works well.But if I reopen the .cdr-file and do my manipulations at my picture and then I try to export the .tif - file to the folder, where the before exported .tif is situated, corel well notice that the old file exists and asks for replacement,BUT instead of exporting the .tif - file the .cdr file will be saved. Got this failure reproducible by doing it the same way.
not till I exported a other file type .jpg or any other and switches back to .tif, exporting the .tif file works and the old .tif - file will be replaced by the new one.
Open an .AI file saved on a netapp or windows shared directory with full permissions (prior to saving I noted that all security groups are intact in file properties as we have 2 for read and write access)Make any changesTry to save and get the prompt: Can’t save preview, but all other information was saved successfully. The file couldn’t be found. ID = -43 (file is now corrupted and looking in security group file properties the 2 security groups designated for read and write access for the directory is now gone and shows an unknown security group????)
Save as works without a problem. Try to press save again and get This file has been modified outside Illustrator. Do you want to continue?Continue and prompted This file cannot be foundObviously the file preview icon goes from a thumbnail of the file to a generic iconWhen I try to open the file I get: Can’t open the illustration. The file is locked or in use.It led me to believe the issue was either OS X or CS5.5. I was able to open the file fine on Windows Illustrator CS5.5 make a slight change and resaved (which fixed the file and opens again in OS X and read/write security groups show up again?)Optionally, I was also able to fix the file to where I could open it in OS X by simply giving myself Read/Write access to the file from Get InfoÂ
Notes:No issues with the same file in 10.7.x.
I've tested on all available Mac Pro / MacBook Pro machines and issue doesn't seem to happen on MacBook Pro retina?Photoshop and InDesign not affected
I recently upgraded to a new computer and I am experiencing strange black bands blotches when opening many of my old Photoshop files or even when opening common files types (jpg/png). The problem doesn't occur with all file, some open just fine. The distortion only appears within Photoshop,
when I try to save the file for display everything looks fine as long as I don’t open the saved file in Photoshop. I feel like I’m missing something basic but I’ve used PS for years and never encountered this. All of my profile settings are exactly the same as they were on the old computer (basically default) so I don’t think there is a mismatch.Â
I cannot see my image after opening in PS6. The tab shows the file name and I can see the image in the tile when I go to "File-Open".Â
View 1 Replies View RelatedI need to include several pages of pdfs in a book. The pdfs are scanned text documents, image only, with no security applied. When I open the pdf on my mac pro with photoshop cs6, I can make adjustments in the curves dialog, but when I close the dialog the adjustments disappear. The history pallette shows the action, but nothing happened. Also can make visible changes in a curves adjustment layer, but when I flatten the image the changes disappear. I've tried opening the pdf as grayscale, rgb, and cmyk; same result. I've also saved it in several different formats, then reopened it; same result. The file initially opens as a background layer with a locked symbol in the layers pallette. If I duplicate the layer and delete the background, the locked symbol disappears, but photoshop still won't accept changes made in the curves dialog. I tried it with cs4, and had a friend try the same things with on a pc; same result. Levels adjustment won't work, either.
View 4 Replies View RelatedI am a newbie - so sorry if this is a dumb question. But when I open a JPG file with CS3 it will make it very large. For example - when I open a 2.75MB JPG file taken from a digital camera, CS3 somehow increases the file to 14 MB. When I open a 2MB JPG image sent from a graphic designer, CS3 shows the image as 31MB.
View 1 Replies View Relatedif there's a way for my PSD file, which I created and saved in Elements, to be opened in CS2?
View 2 Replies View Relatedi've just been using the brush tool to draw and paint around with, and today when I tried to open up a saved project from last night, It came up all blurry and very undetailed compared to when i saved it. I think it might be the saved file was 16 bit, and maybe it's opening it up in 8 bit which is making it blurry? Or maybe my computer can't handle the 16bit and my resolution on the saved file was too high?
Also, I was wondering some recommended starting specs (like when I open a new window)
I have installed Photoshop CS4 x64 on Windows 7 x64 (RC) and when I open an image (any image file), it is not displayed in Photoshop. This is on a fresh install on a new PC. I see the tab (and the window) that photoshop displays for an image, but there is no image data in it. The only way I can see the image is if I drag the tab (converting it into a window), once I drop the window, the image data is again not visible. I am getting the same issue with Photoshop CS4 (x86). Has anyone else seen this before? I have updated my video card drivers, and I installed the drivers for my monitors (even though I don't believe in monitor drivers!).
View 8 Replies View RelatedWith the scenarios set up below, it seems that these files are taking unusually long to open and save (up to 20 minutes on scenario #1, up to 7 minutes on scenario #2). Is this typical for the filetype described?
SCENARIO #1
[Running 32 bit Windows XP on a 2.3GHz ThinkCentre M55p, 2GB RAM, Photoshop CS1. Have files ranging in size from 50MB to 325MB. Application installed on C: drive, primary scratch disk is on partitioned D: drive with 3.96GB free space, secondary scratch disk is on C: drive with 53.98GB free space. Largest file has about 12 layers, including 3 layers with rasterized PDFs and about 9 layers that have blocks of filled color with craquelure & inner shadow added.]
SCENARIO #2
[Running 32 bit Windows XP on a 2.3GHz ThinkPad T61p, 2GB RAM, Photoshop CS1. Have files ranging in size from 50MB to 325MB. Application installed on C: drive, primary scratch disk is on partitioned D: drive with 36.4GB free space, secondary scratch disk is on C: drive with 29.7GB free space. Largest file has about 12 layers, including 3 layers with rasterized PDFs and about 9 layers that have blocks of filled color with craquelure & inner shadow added.
I have simple line drawings in illustrator (outlines of clothes) that I wish to open in photoshop to add colour and effects to. When i have tried to copy and paste (as normal paste, smart object, pixels, path and shape layer) the quality is lost.
I have also tried to open or place the file in photoshop as a .psd, .ai , .pfd and still the quality is lost.I have saved with different resolution settings too, but it always loses quality when it is opened in photoshop.
Â
Is there any way to have a clear line drawing like it is in illustrator in photoshop?
How can I locate file recently opened photos in photoshop. Photos from like 4 days ago.
View 4 Replies View RelatedWhen I try to open any file in PS6 (jpg, png, psd), it shows open in the history but the file doesn't show up on the work space. I have never had this happen to me before! I've updated everything available, too.
View 2 Replies View RelatedCan a jpeg file be opened in raw format in photshop elements 11?
View 4 Replies View RelatedWhen a user rasterizes a color image in Illustrator and then copies it into Excel and saves the file the image turns black and white. I uninstalled and reinstalled the whole suite already, deleted the perference files that i could find. and also look at the rasterizing settings they are the same as mine and another user. Any other things I can try? Where are the default rasterize settings stored at?
View 5 Replies View RelatedWhen I import PRN file in CrelDRAW X4, facing this error:
"An error occurred while processing Output.prn. The file cannot be opened."
I recently created a file in Illustrator CS6 (Creative Cloud version), and saved it as PDF with illustrator editing capabilities preserved. It saved fine, but when I opened the file in Illustrator CS6 again for more editing today, it gave me an earlier version of the file instead of the latest version that I saved last night. However, the file opened correctly in Quick Look, Preview and Photoshop CS6. I've tried to make a copy of the file, and open the copy in a different folder, as well as deleting illustrator preferences.I don't want to spend another 1.5 hours to redo things that I've done.
View 1 Replies View RelatedI am trying to open Lightroom 4 from my desktop and it keeps giving me this message:The Lightroom catalog named "Lightroom 4 Catalog" cannot be opened because another application already has it opened.
View 1 Replies View Relatedtxl058.cdr
Having issues with this file though it is .cdr but still can't be opened.
i have my layer named in Chinese in max 2012,and i opened the same file in max 2013, and the layer name got garbled?is this a bug or how do i fix it?
View 2 Replies View RelatedI have scenario where user can open the drawing using filepath like given below
Application.DocumentManager.Open(filePath, IsReadOnly);
And it is working fine.
I should allow to open the file, if file is already opened state.
I have spent the entire day trying to solve this and I finally found a fix but not the cause. I have tried all the typical ways to sync/read/render to see the xmp data in LR.
Â
After all of this I found the only way for me to see the xmp data is to open the xmp as a text document then save it go into lightroom read metadata and it shows up. This obviously isnt a workable solution for thousands of files so I need to find a cause.
Â
So a little info. I'm using LR5 on a windows. I edit clients images then send them the xmp files with those edits. I have one client thats photos when imported do not show metadata or develop adjustments. This is the only solution I have found to see the info. I believe they are using LR 4 and a MAC.
Â
Is it possible that the problem is the original files are saved on a mac then transfered to my windows machine.
I have a lot of files in the extension ogg that I need to edit using premiere pro cs 5.5.After loading the file receives the information:"The file can not be opened because of header error".I installed already URL....And further receives the above error.The information that I read from MediaInfo:
General
Complete name                     G:3-4.ogg
Format                                  : OGG
File size                               : 1.68 GiB
Â
Video
IDÂ Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â : 29297 (0x7271)
Format                                  : Theora
Width                                   : 2 560 pixels
Height                                  : 1 920 pixels
Display aspect ratio             : 4:3
Frame rate                           : 30.000 fps
Compression mode              : Lossy
Writing library                       : Xiph.Org libtheora 1.1 20090822 (Thusnelda)
Â
Is it possible to load a file to the premier pro without converting them?
I was working on my project today when the window popped up telling me to reload my pavement file. When I reloaded the file, the reference said it was unresolved. I tried to open that file directly, but it would not open.Â
View 3 Replies View RelatedI recently changed PCs and installed AutoCAD 2012 to the new machine. I was working on a patent and exported to PDF like I always do. The problem is that when I do that it automatically opens up the pdf in Acrobat after I've exported. I want to turn that feature off. I export dozens and dozens so the opening of every pdf would be very cumbersome.
View 2 Replies View Relatedrecommend a command line extractor, i want to fill (manually with excel vba) datas (block attributes) in cells with the DXF i have in tons of projects, everything is ready except i dont know which lines to consider in the DXF.
Example : i have once instance of a block in a file, but i read the dxf as a txt and i see it (called "plc_a_1") at 5 places in the txt, and the real x,y coordinate fits one of them, but the attributes for it are like 500,000 lines further..