VideoStudio :: Change Video Bit Rate Only

Feb 3, 2012

First, I have lots of files with different properties ( SD and HD files) and all files have different properties. My goal is to edit each individual file, save as individual project file (VSP) and create individual final video file, however with an option. The option is to change any property of that individual video file.

Since creating template would not work with all different video properties, how else should I create a final video file to be able to change only the video bit rate (VBR)?

After editing a file, in when I select “SHARE/CREATE VIDEO FILE/SAME AS FIRST VIDEO CLIP”, the “OPTIONS” does not give me the option to change any individual property. That is, the video files that have too high VBR, I would like to reduce their individual VBR only and leave the rest of the other properties alone.

View 3 Replies


ADVERTISEMENT

VideoStudio :: Best Video Bit Rate When Converting VHS?

Jun 28, 2011

I am converting some video from VHS tapes starting by copying my VHS tapes to my DVD player/recorder's harddisk. I then intend to copy from the hard disk to DVDs and don't mind copying at the maximum resolution. I will then import those DVD's into VS and edit. What I want to know is what is the maximum bit rate I should use so that I don't loose any resolution (my VHS is bad enough as it is) but also fit as much as possible to a single sided DVD. As the resolution of VHS is nowhere as good as DVD I would have thought that it would be a waste of space to output at say 7500kbs.

View 14 Replies View Related

VideoStudio :: Cutting MP4 Video With Same Data Rate

Dec 8, 2013

I have 960*544 mp4 video

data rate 1800 kbs

29.970 fps

I want to cut a portion of it and put the same data rate but the quality was not good

View 14 Replies View Related

VideoStudio :: Why Does Frame Rate And Video Quality Decrease

Dec 19, 2010

I shot some clips on my sony cyber shot camera (its about 2 years old so the content is not in HD). the clips are in .mpg format

i'm using the trial version for corel videopro x3 -. when i try to trim the clip, the output is not as good as the original clip. Why would this be ?

i selected the "same as project settings" option when creating the file. is there some other option i should choose ?

or is this because i'm using a trial version ?

i used to edit my clips in windows movie maker and it irrespective of whatever editing i would do, the clip quality would be exactly the same as that of the source clip.

View 1 Replies View Related

VideoStudio :: Capture Video Bit Rate Is 300 - Frame Size Is 640 X 480

Jul 23, 2013

I have VideoStudio SE, packaged with Sabrent USB-AVCPT cables. I was able to capture video for a while. Now when I try I get the following message. "Capture video bit rate is 300. Frame size is 640 X 480. When using this frame size the video bit rate should be between 1578 - 8838."

View 5 Replies View Related

VideoStudio :: Unable To Compress Video With Specific Frame Rate Or Size

Oct 21, 2007

I have some video in mpg format I'm trying to split into scenes, and then save off a separate videos. When I try to save one of the trimmed scenes using "Save trimmed video," I get the error: "Unable to compress video with the specific frame rate or frame size." It's all set in 16:9, and it's all set to 29fps, etc.

View 4 Replies View Related

Photoshop :: How To Set Frame Rate To 12fps On Video

May 31, 2013

I imported a video layer from file then set the frame rate to 12fps, when I play the video it keeps changing the frame rate to random times. How do I keep it at 12fps?

View 6 Replies View Related

Photoshop :: How To Slow Down Video Frame Rate In CS5 Extended

Sep 11, 2011

I need to slow down a clip of video from its original frame rate. The original video is a piece of CCTV footage and is timelapse with a frame rate of 3fps and a total duration of 22 secs. I need to slow this footage down to create a slomo clip. can this be done in CS5ext?

View 8 Replies View Related

VideoStudio :: Change Video From 4:3 To 16:9

Jan 17, 2013

I have a video clip in 4:3 format that I want to insert in a video project in 16:9 (project properties set at 16:9). How could I do that?

I know that there will be black bands above and below the converted project. However, when I inserted the 4:3 video clip in the 16:9 project, it stays in 4:3.

View 1 Replies View Related

VideoStudio :: Change Video Size

Jun 21, 2013

I'm new to Corel. I have done some video editing. I have used Premiere in the past. I am importing dv video and the size captured is 740 x 480 from my Sony DV camera. It is an older camera. First Digital Hi-8. When I produce a video and play it in a player on the pc it is displayed in whatever size I want, including full screen. When I burn a dvd it only plays in a small window, I'm assuming 740 x 480. Is there a way to produce a video that will take up the entire tv screen. I'm only concerned with 4:3 ration, not widescreen at this time.

View 8 Replies View Related

VideoStudio :: Pro 5 Data Rate

Oct 24, 2012

I'm relatively new at video editing so VS Pro5 has been my first venture into this world. I use a rendering program called Lumion to generate video from the architectural models I create at full 1080p. The problem that I seem to be having is that Corel doesn't support the data rate that the Lumion videos tend to be. My current walkthrough is a 1080p mp4 video and windows tells me its data rate is 42435 kbps. When I import into VS pro5 it tells me the same video is 42180 kbps. When I try to export the clip the program always reduces the data rate to a level that ruins the visual fidelity of the clip. I have tried the custom export and the program won't let me enter higher than 20000 kbps and when I tried the method of using the first clip settings it still reduces the clip down to 36510 kbps which is better but still not the original data rate. Is there something I'm missing or VS Pro5 have data rate limits?

Is 42435 kbps a ridiculous amount for data rate for 1920 x 1080 30f/s video? I don't know a thing on data rates but I'm assuming it's why I'm losing quality in my final video. The 42435kbps clip runs fine on my machine but what should rate should I be considering for my clients to use?

View 9 Replies View Related

VideoStudio :: Change Narration In Rendered Video?

Aug 11, 2011

When my project is rendered... and put on a DVD, is it possible to later change its narration to another language? I ask since I notice that, once rendered, the music, video and narration tracks become one. Is there a way of later separating them, say for changing the language of narration for viewing in another country?

View 14 Replies View Related

VideoStudio :: How To Change A Video Clip Thumbnail

Nov 25, 2010

How does one change the thumbnail for a video clip? By default, VS Pro X3 seems to use the first frame of the clip. I would like to choose the frame. Is that possible in VS?

View 7 Replies View Related

VideoStudio :: Change Edited Video From NTSC To PAL

Apr 7, 2011

I have created and burnt a video and find that after burning it plays fine on a computer but not on television. Opening the video in Pro X3 and checking the Properties I find that it is in NTSC profile. Obviously not a lot of use in the UK. The television tells me that the DVD is an incorrect DVD, which I would expect if it's burnt for viewing on a computer or in NTSC format.

How can I change this to PAL DVD? When saved it is saved in Corel VS, which I would expect. When I go into the Library to obtain the video there appears nowhere where I can change it to PAL.

View 2 Replies View Related

GIMP :: Why Does Frame Rate Not Change

Oct 28, 2012

So every time I try to change my layer replace like this (200ms) (replace) in the name field, it makes no difference when i open the image up like in chrome or anything. I also change it when I export it to default value to use for all frames, and nothing comes out of it.

View 2 Replies View Related

After Effects :: Change Frame Rate From 23.976 To 24

Mar 7, 2013

I have a Quicktime render of a project I made a few months ago that was originally created at 23.976 FPS.
 
I now need to prepare this Quicktime render for digital projection in a movie theater -- the file I need to give my client has to be 24 FPS progressive.
 
I'd like to try and convert my Quicktime and audio without going back to the project itself, as this is a complex project and would take a really long time to re-render at 24 FPS.
 
Best method to convert my 23.976 Quicktime movie? Are there specialty plug-ins I should look into?

View 3 Replies View Related

VideoStudio :: Change Default Options When Creating Video?

Mar 26, 2012

how to change the default options when creating a video?

I keep forgetting to turn off "smart render" and "non-square pixel rendering" in the options dialog when I convert.

Also it would be nice to be able to turn on Dolby 5.1 by default as well.

View 2 Replies View Related

VideoStudio :: Choppy Audio And Low Frame Rate?

Oct 24, 2012

I am using VS ProX5. While capturing the video captures normally for a few seconds and then stucks and moves slowly with one or two frames per second and the audio is very choppy.

Other video clips in my PC plays OK in VS.

I am capturing from my Panasonic digital camera through firewire cable/port to my Windows XP PC.

It used to work properly and for the past few months it is giving problem and I left it from there.

View 8 Replies View Related

AutoDesk Smoke :: How To Change Frame Rate

Mar 29, 2012

how to change frame rate. I have a images 59.94 fps in the edit desk, i want to change to 23.976 fps

View 1 Replies View Related

Photoshop Elements :: Unable To Change Frame Delay Rate

Nov 5, 2012

I have been unable to change the frame delay rate using Photoshop Elements 9 on Mac when trying to create animated gifs. Does it work on later editions of Elements?

View 5 Replies View Related

Revit :: How To Change Currency Rate Used For Calculation Of Electrical And Fuel Prices

Oct 28, 2013

How to change currency rate used for calculation of electrical and fuel prices in revit 2013 during Energy Analysis?

View 2 Replies View Related

VideoStudio :: Split Single Video File Into Multiple Video Files?

Feb 13, 2011

I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:

PROBLEM:

I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.

As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.

as I have 30 videos to edit, so looking for ways to save time!

View 11 Replies View Related

VideoStudio :: Video Filter For Specific Times In Single Video?

Feb 24, 2011

I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?

View 5 Replies View Related

VideoStudio :: Push Video In Video Track After Title Track Is Completed?

Feb 16, 2011

Is there any way to push the video in the video track after the title track is completed ....

View 4 Replies View Related

VideoStudio :: Video With 20 Fps

May 30, 2011

Is there a way to set 20 fps for my video in corel video studio x3 ?

i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.

View 2 Replies View Related

VideoStudio :: Blu-ray Video Formats

Jul 25, 2011

With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:

Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)

Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).

View 9 Replies View Related

VideoStudio :: Editing 3D Video In X5 (SP2)?

Mar 28, 2013

Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).

View 9 Replies View Related

VideoStudio :: Convert Video To 4:3

Mar 3, 2013

Is there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?

View 3 Replies View Related

VideoStudio :: How To Capture Video

Dec 18, 2010

I just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera

This the camera I purchased.

[URL]......

I would like to hook my camera up to my computer

[URL]........

How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.

View 3 Replies View Related

VideoStudio :: Compressing Above 20k Bit Video?

Feb 19, 2013

When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.

I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.

- How can I compress my files with higher bitrate? I want it around 30.000k.

View 1 Replies View Related

VideoStudio :: More Video Options In X4 Vs X5?

Aug 25, 2013

Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)

I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved