Photoshop :: Decrease Canvas Size By Removing The Middle?
Feb 28, 2009
Is it possible to reduce canvas size by removing a set width or height to be removed from the center of the image? Here is an example situation. I have a graphic that I use for rounded corner effects in a website. For border and shading reasons, I am using images that span the whole width of the element, not using individual corner images. So, my image would look something like this:
:.__________.: (bottom.gif, let's call it)
I've had to create a number of these images in varying widths, based on whatever element it is to accent. What I'd like to do is have my base PSD image be, say, 1000 pixels wide, and when I need to create a graphic that is 200px wide, I would just remove 800px of width from canvas, but from the center, and have the sides collapse in together.
My picture’s original size was 108.2 MB in tiff. After I developed my photo in Lightroom and exported the new image, the file decrease to 50MB in tiff. Why did Lightroom decrease the file size to more than half the original size? Is there a way to increase the exportation file size to that I may develop a large size print?
I have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
I have an image with many layers. I want to cut a vertical strip out of the middle of one of the layers because I want to narrow the transparent gap between the left side of that layer and the right side. That is, my image has stuff on the left side and stuff on the right and a gap in the middle through which shows the pattern in the layers below, and I want to narrow that middle gap. I want to do the same thing as cutting a vertical strip down the middle of that top layer with scissors so I can scrunch the sides together, so less of the patterns on the layers behind shows through.
Is there any way to do this? It doesn't work when I simply select the area I want to cut and click "cut" or "clear" - those commands don't get rid of the canvas in that section, just the contents, which are transparent anyway.
I'm trying to avoid resizing the canvas and then laboriously reconstructing the layer with all the finicky alignment issues, because that seems unnecessarily time-consuming, when all I need to do is remove a gap in a blank section. I tried using guides to guillotine the image, but that, too, is turning out to be time-consuming in terms of reassembling the image. I know I must be missing something obvious - how does one simply remove a selection of the canvas (and not of the image itself) with the selection tool?
I want to print pdf. Actual pdf size is 2.27mb. But when I send it on plotter for plot it , pdf file size increase up to 46.9MB. I wait more than 60 min for plot. But nothing came out.
Plotter display windows shown as processing print.
How I print it fast or how I decrease pdf size for printing.
We have a drawing that has been exploded purged, overkilled, audited and we still cannot decrease the size of it. Theres no blocks, theres no 3d, its a very simple drawing but I feear its corrupted. I've tried copy/blocking the information out of it but that just makes it crash. I cant attach it its too big! (16 meg)
Within gimp, I selected a portion of one image, copied it, and pasted it on another image. Now I want to take the pasted selection and increase/decrease its size. What tool does this? 'Grow' and 'Scale Image' doesn't work.
I edit an mp4 video and produce a new mp4 video. If I produce the new mp4 while I open the project, the screen size is normal. (c_not_use_batch.jpg) If I produce the new file using batch convert, the screen size is reduced (c_use_batch.jpg) However, the setting for producing the files are the same (c_setting.jpg)
The files and settings are the same. The only difference is using batch convert or not.
I’m a PS user new to Illustrator (CS6). In PS, using the bracket keys [] to increase/decrease brush point size will simultaneously update the data displayed in the tool panel at the top.  While I can use the bracket keys in Illustrator to change the appearance of the brush stroke, it is not being updated in the tool panel input or in the stroke window…so I can essentially have (2) 3 pt strokes created with the same brush that don’t visually match but whose display properties DO match. Because I will be doing lots of editing I certainly don’t want to work this way.
Can someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
In photoshop 7, I create a graphic. But most of the time the default size of the canvas is bigger than the graphic. How can I "snap," the canvas size to the picture size?
I'm trying to clean up an image for a friend. He's a painter and his photo shows all the hatch marks of the canvas. I have tried noise removal but it doesn't remove enough. I have tried despeckle, destripe, deinterlace and antilais. The option that works the best is the oilfy filter but to achieve a good result I lose details in his painting.
I tried to do heal selection but it tells me Error: eval: unbound variable: plug-in-resynthesizer. When i go to the registry i find resynthesizer scripts URL.... I install the scripts but still get the message.
Any other tool or script that will be useful besides healing sections of the photo with the healing brush.
I was trying to add 5mm around the canvas, when i noticed something strange.
I changed the measurement to cm, then added 1cm to each, Height and Width, then changed the Width measurement to mm (which changed both displays to mm) but only one of the setting changed to mm; the height still had the same value it had when displayed in cm.
This only happens when both Height and Width are changed.
im currently working on a project that requires a very large canvas. currently, photoshop will not create any canvas with pixel dimentions of over 30k x 30k. the only way i can currently fit my entire image is to drastically lower the image DPI, any way to change this limitation photoshop has, or if theres another program I can use to do this?
I am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it. Â I don't have this problem at lower resolutions
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas? Â I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
I want to change the canvas size, though why is it that when I press the down arrow it adds to the canvas on top, and when I press the up arrow it adds to the canvas on the bottom? It just seems like it should be the other way around.
I have a strange problem when i send my photo i created with photoshop to a company to make a print. In photoshop i create a canvas with the size of 20x30 (300ppi). I put some photo's on it so it fit almost the hole canvas. Than i have a little space for a nice border around it. Finished. Send it to a company and when i receive the photo i check the size of it. It is exactly 20x30, so that is not the problem.
The problem is that i now miss some peace of my border. So if i wanna keep the border i have to send a photo with a canvas size around 19x29.
I need to design my first template using photoshop. the content area of the web site will be 980px ( width ) ..
I like to add border to each side ( left and right ) .. i seen many sits using background image that spans the entire screen and has left and right boarder added to the background , which effectively looks like border on each side of content area.
however, i was not able to figure what would be the best canvas size for this . as each site i looked at , background was set to different size ..
my main content will be in center of the monitor .
im currently working on "stitching" together several high resolution images for work, and have come across a problem with the canvas size. Currently, i cant have my canvas over 30k X 30K pixels, and the only way for me to fit the entire project as one file is to drastically lower my image DPI. is there any way i can change photoshop's canvas limitation?
