Photoshop :: Canvas Size For Web Page
May 14, 2009
I need to design my first template using photoshop. the content area of the web site will be 980px ( width ) ..
I like to add border to each side ( left and right ) .. i seen many sits using background image that spans the entire screen and has left and right boarder added to the background , which effectively looks like border on each side of content area.
however, i was not able to figure what would be the best canvas size for this . as each site i looked at , background was set to different size ..
my main content will be in center of the monitor .
View 5 Replies
ADVERTISEMENT
May 12, 2013
Im not even sure if Illustrator is the program or if i should use Indesign but im trying to create a single folded wedding invitation and be able to print on both sides. i want the invitation to be 14cm x 14cm and like i mentioned open up like a card and print on the front and on in the inside. Can you pleasssseeee direct me to some instructions or tell me which program would be best to do this. Im guessing that since its smaller than an A4 page size then i will need to cut it down after printing. To be able to do this do i need to make the canvas the size of a A4 page and then put my size of the invitation on this??
View 2 Replies
View Related
Aug 31, 2012
I am making a website on Illustrator 1,200 px 1,200 px. When i export it to .PSD i open it as a much larger file in pixels than this and with a whole Canvas/ Artbord white area which i don't need.
Â
Is there any way to keep the page size like the final ouput without the white canvas area in the export?
View 2 Replies
View Related
Sep 13, 2012
I'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies
View Related
Feb 23, 2012
I just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies
View Related
Jun 3, 2011
When I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
View 2 Replies
View Related
Aug 28, 2013
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
View 6 Replies
View Related
May 14, 2003
Can someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
View 3 Replies
View Related
Jul 19, 2009
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies
View Related
Jun 24, 2003
In photoshop 7, I create a graphic. But most of the time the default size of the canvas is bigger than the graphic. How can I "snap," the canvas size to the picture size?
View 2 Replies
View Related
Aug 7, 2012
I've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
View 3 Replies
View Related
Dec 6, 2012
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â
View 5 Replies
View Related
Feb 28, 2008
I was trying to add 5mm around the canvas, when i noticed something strange.
I changed the measurement to cm, then added 1cm to each, Height and Width, then changed the Width measurement to mm (which changed both displays to mm) but only one of the setting changed to mm; the height still had the same value it had when displayed in cm.
This only happens when both Height and Width are changed.
View 1 Replies
View Related
Oct 20, 2006
im currently working on a project that requires a very large canvas. currently, photoshop will not create any canvas with pixel dimentions of over 30k x 30k. the only way i can currently fit my entire image is to drastically lower the image DPI, any way to change this limitation photoshop has, or if theres another program I can use to do this?
View 1 Replies
View Related
Nov 3, 2013
I am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
Â
I don't have this problem at lower resolutions
View 2 Replies
View Related
Sep 22, 2012
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
Â
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
View 7 Replies
View Related
May 5, 2012
I want to change the canvas size, though why is it that when I press the down arrow it adds to the canvas on top, and when I press the up arrow it adds to the canvas on the bottom? It just seems like it should be the other way around.
View 6 Replies
View Related
Sep 22, 2013
I go to image and then image size and everytime i go to change the canvas size to inches it will not work. Is it becasue the it's the trial version?
View 4 Replies
View Related
May 27, 2012
Using CS3, is there a way to make layers snap to the same size as the Canvas?
View 3 Replies
View Related
Jan 29, 2009
I have a strange problem when i send my photo i created with photoshop to a company to make a print.
In photoshop i create a canvas with the size of 20x30 (300ppi). I put some photo's on it so it fit almost the hole canvas. Than i have a little space for a nice border around it. Finished. Send it to a company and when i receive the photo i check the size of it. It is exactly 20x30, so that is not the problem.
The problem is that i now miss some peace of my border. So if i wanna keep the border i have to send a photo with a canvas size around 19x29.
View 1 Replies
View Related
Jun 16, 2006
I was just wondering what size canvas i should use to make an icon. I just wanted it to be a normal sized icon for msn messenger.
View 3 Replies
View Related
Oct 20, 2006
im currently working on "stitching" together several high resolution images for work, and have come across a problem with the canvas size. Currently, i cant have my canvas over 30k X 30K pixels, and the only way for me to fit the entire project as one file is to drastically lower my image DPI. is there any way i can change photoshop's canvas limitation?
View 1 Replies
View Related
Sep 13, 2013
I have been resizing images for the web, and applying a background canvas border, and have been doing this for days, including today... then, all of the sudden, changing and doing nothing at all, I go to add the Canvas Size, I am importing the images, directly from Lightroom, adjusting the Image Size from the full edited resolution file, to like say 9" long at 108ppi. And then, I open up Canvas Size, and am merely adding a small border of .125" to the width, and .25" to the bottom so as to apply the image's title and a logo icon. And like I said, it has been working normally up until a half hour ago, where for some stupid reason, it is making like a 6.125" x 9.25" input and creating a 12.25" x 18.5" canvas!
Â
One thing I have noticed when it started doing it, the image's dimensions all of the sudden were not displayed aleady in the input fields, but just showed 0's. I have closed out and rebooted the program a couple times, to no avail... and even went in and updated that, apparently same 14.1 update that keeps popping up every single day, and nothing has changed.
View 2 Replies
View Related
Jul 24, 2013
I was just wondering for photoshop how much pixelsfor canvas size everybody is used to using?
Â
I use photoshop (previously 7, CS3 in office, recently upgraded to CC) to draw comic strips, and quite often I just keep expanding the canvas vertically as I draw more panels.Now, of course common sense would dictate that the larger the file the slower your photoshop gets. I just noticed today that one of my files is getting sluggish, and yup, the height has gotten to 14000 pixels. Better crop that thing before it gets to the point I can't even open the file anymore. So I was just wondering if there was any rule around as to how big a file can get before it's too big to operate on photoshp.
View 2 Replies
View Related
Oct 27, 2013
In my "canvas size" dialog box, the canvas extension color is not available, how can I fix this?
View 1 Replies
View Related
Jun 8, 2006
I've resized a photo in Image Size but when opening Canvas Size, the dimensions have changed slightly. Why?
To get the printed size I set in Image Size, do I have to alter the canvas size or do I not need to bother with it?
View 4 Replies
View Related
May 25, 2006
way to see your image passed the photoshop canvas size.
View 5 Replies
View Related
Mar 11, 2013
So, I have a "Fit Screen" image open with no canvas.  I select "Print Size", and it reduces the image size, but leaves a huge expanse of canvas that I have to drag in to remove.
Â
Where is the setting to prevent that? (CS-6)
View 3 Replies
View Related
May 11, 2013
I am trying to create an action for watermarking. However, I would like to be able to size my logo to be a specific % of the entire canvas size, i.e. 20% width to be a part of my action so that the logo is always proportional to the image size.Â
View 1 Replies
View Related
Nov 19, 2013
I have this issue in Photoshop CS6 which I don't find in the older version. I only can click from the dropdown menu as the shortcut key function "Alt+Ctrl+C" is not applicable?
View 7 Replies
View Related
Nov 1, 2013
Canvas size occasionally the canvas extension colour is greyed out this can happen on any file ie jpg tiff or PSD.
View 5 Replies
View Related
