So, I have a "Fit Screen" image open with no canvas.  I select "Print Size", and it reduces the image size, but leaves a huge expanse of canvas that I have to drag in to remove.
Â
Where is the setting to prevent that? (CS-6)
I have a Epson R2880 and want to print a series of panoramic prints on it, i have set up the print to be 8x24 inches. When I open the panoramic and give it the size of the paper, CS3 automatically resizes the print, so if i set the image to 8x24 the height of the actual picture is either 8x40 or 3.78x24 .... is there a way to get a real 8x24 print or will CS3 always resize to a fixed set of dimensions ?
View 2 Replies View RelatedI used scale image to make a 2.314" x 3" image to print so it'll fit in a frame that I have for that same size. When I print it out the size looks great but it's over on the edge of the 4x6 paper and most of the picture is cut off. I tried, I should use print size and not canvas size but when I change the print size to 4x6 it also changes my canvas size back to 4x6. I still have my original so I can do this again but what I want is a 2.314"x3" image to print out on my 4x6 glossy paper.
View 2 Replies View RelatedI'm working on a flyer on a 8x11 canvas, but I want all of the elements I'm working to be transferred to a NTSC video film format. I understand how to a open a NTSC (Video Film Canvas), but I do not understand how to convert a canvas that I'm working to that.
View 1 Replies View RelatedI just got CS5.1 at my job. This must be a preference, but when I adjust the Canvas size, it will constrain the image, rather than cropping the canvas. The Anchor in the Canvas Size menu appears outlined (highlighted?) which indicates that this is something in preferences that I can adjust.
View 2 Replies View RelatedWhen I go to create a File/New Canvas, sometimes the canvas area shrinks a lot.
Is it possible to keep the original canvas size ?
I have CS6 on two Mac computers, a desktop and a laptop. On the desktop, everytime I draw a Rectangular Marquee, a very distracting black box with dimensions comes on at the lower right corner of the selection. This does not happen with CS6 on my laptop. I can't find a control to turn this box off. Where is it?
View 3 Replies View Related-PC based system running Windows Home Premium 64 bit8 GB ramLots of hdd spaceCS5.5 Master Suite
-Epson Sylus Photo R1900
Â
Operating system, CS5 suite and printer drivers all updated.
Â
When attempting to print a photo, it can take anywhere from 5 to 15 minutes for the print dialog box to open up. It takes SO LONG that it appears that Photoshop has frozen, but it has not. The print dialog box opens eventually. This started about 2 months ago. I have looked at all preferences, assigned more RAM to Photoshop, uninstalled and reinstalled the entire suite, ran all updates, uninstalled and reinstalled the printer drivers - all to no avail.
Â
I am at a loss as to why it would take SO LONG for the print dialog box to open after selecting print? I thought there may be a problem with the print spooler or print queue, but the slowness happens BEFORE the print back system is touched. The print queue is empty, and there is nothing stuck in there. I've checked.
everytime i use the selection tool it selects the entire canvas and not the image i want. why is doing this? how can i prevent this?
View 6 Replies View Related how to select items on the canvas, aside for selecting each individual layer on the layers panel. have Mac os X 10.7.4, and I previously had cs5.5 on my laptop.
Â
I was able to use the direct select tool to select mulitple items by either dragging it would select anything in the box or using shift to select multiple items. Do I have to click on every item in the layer panel to select it on the canvas? Is there a option that I have checked when it should be unchecked?
1. How do I connect, collapse and disconnect windows (tool bar, property manager, etc.)? They get stuck together and I can't unstick them. Â
2. What's the difference between canvas size and image size? Â
3. Which tools are only for web design (i.e. tools I can ignore if I'm not doing that)? Â
4. What's the subselection tool do? Â
For Photoshop: Â
1.Why is the original layer always locked?
2. Whats the name of the property inspector in PS? And is it called inspector or manager in FW?
Can someone please explain to me about file sizes and image dimensions. I have to put together a collage which is 165mm high by 258mm wide. If I click file new and choose default resolution (72) then the file size is ok, if I type in 300 dpi the image becomes huge.
If i chosse 300 dpi then the images I was going to use seem tiny on such a vast workspace - Im confused why does the canvas become so large when changing resolution?
I have a created a new PSD that is 8 1/2 x 11.The canvas size is the same 8 1/2 x 11.I want to put a border around the picture (say 1/2 of an inch all around), and put the finished picture in a Picture frame. After it is in the frame, you would be able to see the entire picture plus the border. Q. Should I change (reduce image size) of the PSD to (for this example), 8 x 10 1/2.     Then increase the canvas size to 8 1/2 x 11. After I increased the canvas size, do a Paint Bucket fill with white (to create the White border)? then print the changed size PSD on 8 1/2 x 11 paper so that it will fit into a 8 1/2 x 11 picture frame I realize I could have just created the new PSD to be 8 x 10 1/2 in the first place.
View 5 Replies View RelatedIn photoshop 7, I create a graphic. But most of the time the default size of the canvas is bigger than the graphic. How can I "snap," the canvas size to the picture size?
View 2 Replies View RelatedIm having some problems with GIMP and my graphire4 tablet. Im not using the pen, only the mouse in gimp. Using Windows Vista and a Wacom Graphire4 tablet. When drawing, the pointer is offset from where I am actually pointing my mouse. This only happens while drawing or selecting/cropping on the canvas. All the menus work fine, and the mouse works perfectly in other graphic programs and windows.
View 1 Replies View RelatedI've just reduced the size of a canvas from 300x300 to 200x200 but when I merge the layers I'm left with a dotted line showing the original size.
reduced canvas size.tiff (128.61K)
Number of downloads: 3
I am trying to print a 22"x40" print on canvas using CS5 with the Epson 7600. The image prints fine until about 2/3 of the way thru and then it just stops. This has happened 3Xs now.Â
Â
On first attempt the resolution was set at 300dpi and the file was about 400+mb.I've flattened the image and reduced the resolution to 200 making the file about 120mb. Same problem!
Â
I printed the same image (at the larger size) on paper without any problem.
My dad has taken 3 photos and he wants them printed into canvas for Christmas. I need the images edited to try and get the colour so it matches on all 3. Below is what the 3 canvas images will be like, but as you can see I have tried to get the colour to match but my Photoshop skills are not up to much! The size of the canvas's will be 50cm Square
You will see from the originals I have cropped the image and have tried to make the horizon the same level. So what I am looking for is a square image with the horizon on all three photos level with each other and the overall colour of the image the same.
I'm using Photoshop CS5 and as you can see on the picture below, when I set my grid line to every 1 px, grid doesn't match canvas pixel size.
Now I'm not able to draw sharp shapes using pen tool because even if I hold shift key everything gets blurry.Â
with a photograph i have taken, I am planning on having it printed it up into a canvas, but wonder if can be sharpened up a little bit first, ie, the bit of blur on the fairy lights if possible?
View 9 Replies View RelatedI was trying to add 5mm around the canvas, when i noticed something strange.
I changed the measurement to cm, then added 1cm to each, Height and Width, then changed the Width measurement to mm (which changed both displays to mm) but only one of the setting changed to mm; the height still had the same value it had when displayed in cm.
This only happens when both Height and Width are changed.
im currently working on a project that requires a very large canvas. currently, photoshop will not create any canvas with pixel dimentions of over 30k x 30k. the only way i can currently fit my entire image is to drastically lower the image DPI, any way to change this limitation photoshop has, or if theres another program I can use to do this?
View 1 Replies View RelatedI am trying to open a new document to make a design that will be printed.Since it will be printed, I set my resolution to 300 ppi.I need my canvas size to be 6.5" by 3.625", but the canvas size automatically sets itself to 6.5" by 3.627", and I can't change it.
Â
I don't have this problem at lower resolutions
I have designed a billboard and used various photos. Due to changes in the positions of the layers, I ended up with a canvas bigger than the photo. So I need to remove the extra canvas. How do I remove the extra canvas?
Â
I can use the marque tool to copy/cut and paste the photo unto a new file, and hence get rid of the extra canvas. If this is the way forward, is there a precise way to get the marquee tool to the edges of the photo? Is there a function to snap the marquee to the edge of the photo?
I want to change the canvas size, though why is it that when I press the down arrow it adds to the canvas on top, and when I press the up arrow it adds to the canvas on the bottom? It just seems like it should be the other way around.
View 6 Replies View RelatedI go to image and then image size and everytime i go to change the canvas size to inches it will not work. Is it becasue the it's the trial version?
View 4 Replies View RelatedUsing CS3, is there a way to make layers snap to the same size as the Canvas?
View 3 Replies View RelatedI have a strange problem when i send my photo i created with photoshop to a company to make a print.
In photoshop i create a canvas with the size of 20x30 (300ppi). I put some photo's on it so it fit almost the hole canvas. Than i have a little space for a nice border around it. Finished. Send it to a company and when i receive the photo i check the size of it. It is exactly 20x30, so that is not the problem.
The problem is that i now miss some peace of my border. So if i wanna keep the border i have to send a photo with a canvas size around 19x29.
I need to design my first template using photoshop. the content area of the web site will be 980px ( width ) ..
I like to add border to each side ( left and right ) .. i seen many sits using background image that spans the entire screen and has left and right boarder added to the background , which effectively looks like border on each side of content area.
however, i was not able to figure what would be the best canvas size for this . as each site i looked at , background was set to different size ..
my main content will be in center of the monitor .
I was just wondering what size canvas i should use to make an icon. I just wanted it to be a normal sized icon for msn messenger.
View 3 Replies View Relatedim currently working on "stitching" together several high resolution images for work, and have come across a problem with the canvas size. Currently, i cant have my canvas over 30k X 30K pixels, and the only way for me to fit the entire project as one file is to drastically lower my image DPI. is there any way i can change photoshop's canvas limitation?
View 1 Replies View Related