AutoCAD Inventor :: Change From INCH To Centimeter?
Jul 30, 2012
I found one motorycle drawing, but there is all dimensions in INCH. How can i change from INCH to centimeter to do this sketch in centimeter. I am never done this before, and I don't know.
If I change dimension in documents (Inventor) to draw in INCH, I cant put there like 3/15 and some little numbers.
how to make changes from INCH to centimeter and to do drawing in Centimeter.
View 4 Replies
ADVERTISEMENT
Jan 20, 2014
does using a grid set to foot vs Centimeter cause the computer to use more processing power?
I would believe it to do so because when building something to scale on the centimeter grid it is much smaller then building it on the foot size grid.
View 1 Replies
View Related
Dec 3, 2012
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies
View Related
Dec 1, 2011
I have a blue rod. How can i change the last inch on each end to a different color such as red ?
View 2 Replies
View Related
Apr 5, 2012
how to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies
View Related
Jun 16, 2012
I have a fully completed drawing that is in 'architectural' (inches) and I would like to be able to change all of the 'feet & inches' linear dimensions (which form part of the drawing when the layer is turned on) to solely 'mm' instead.
The UNITS command keeps coming to mind, but I know that's not how to go about it. I've Googled for like 45 mins and read some highly overcomplicated instructions that lost me.
(note I am posting this in the beginners section )
simplified way to change this either via a command or changing settings via the toolbar?
View 4 Replies
View Related
Jan 25, 2013
Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies
View Related
Oct 7, 2013
If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
View 8 Replies
View Related
Mar 5, 2014
I placed I-Joist on the floor plan and used the wrong spacing. Can I select the already placed joist and change the spacing from 12 inch OC to 16 inches OC? I know I can select the ones I want to change, but I do not see in the properties window where I can change the spacing. Unless I am overlooking it.
View 9 Replies
View Related
Feb 10, 2011
I have a drawing that has dimensions in inches and I need them to read in centimeters for a client i am working with. I tried changing the units but that did not work.
View 6 Replies
View Related
Nov 14, 2011
im using IV 2011 RS, the spacing of my suffix is like double spaced it looks like 15 " and i want them to look like 15"
View 1 Replies
View Related
May 26, 2012
I have changed my settings in all of my templates to metric. I create a new assembly, add the part (yes, it is set to metric), I now create my first new part in the assembly. When I start to sketch it changes back to inch. How do I set it so it stays metric? This is Autodesk Inventor Professional 2012.
View 6 Replies
View Related
Jun 28, 2013
How can I have both Inch & Metric dimensions on a drawing? Preferably, inch above metric below.
View 1 Replies
View Related
Sep 27, 2011
I have a parameter length that is currently in inches and I would like to use it to populate the description but I would like it to be displayed in Architectural style (i.e. 12’-3”). I would also like to have it round up to the nearest 3”.
View 4 Replies
View Related
Dec 2, 2013
How can I Draw a line directly centimeter. I Know Inch setting. I want to I select line tool then enter 1, draw 1 centimeter line.
View 6 Replies
View Related
Apr 17, 2013
When I'm trying to select/move/do anything anywhere on my workspace (not the UI, the actual window where you model), the cursor is offset by about a centimeter. I've tried running as administrator/doing all sorts of compatibility things and resetting the user interface in Max. I've also tried changing various settings on my video card (power saving off and whatnot).
I'm running windows 7 64 bit, all drivers are up to date.
View 9 Replies
View Related
Sep 16, 2013
The standard unit conversion calculator (from Google) says that the 668 pixel = 17.7 cm. But this values are varying in the Adobe Illustration, i.e., 668 pixel = 23.56 cm.
View 2 Replies
View Related
Jul 23, 2012
I created a canvas with 10 x 15 cm.
I am unable to create a vector rectangle or to set a raster image layer to fit 3 x 4 cm. I intend to fill the 10 x 15 cm canvas with a plenty of 3 x 4 cm photos.
a) Considering a rectangle vector, I set it to 300 x 400 (width x height), but the size don't match 3 x 4 cm, since the ruler (preferences/units/ruler) is set to cm an it is clear the 300 x 400 vector is smaller than 3 x 4 cm. Then, how could I set vector size to millimeters or centimeters?
b) I paste an image as new layer in the 10 x 15 cm canvas. The pick tool allows just scale the image, but I would like to obtain more control over raster image size. So, similarly to the vector issue, how could I set raster size (layer image into bigger 10 x 15 cm canvas) to fit 3 x 4 cm exactly?
View 4 Replies
View Related
Mar 18, 2013
How can I set dimensions to not show inch tick by default just the number?
View 1 Replies
View Related
Aug 30, 2011
I have a form with some textbox on it, which should be filled in with imperial dimension. Like foot and inch. Users right now complain about it is not user friendly ,to put data in form, and honestly they are right. I didn't a good job .
Some people like to put vetting in inch and then by the time textbox lost it focus it should automatically convert data to feet-inch format. Some other user like to put decimal I have to be able to should them in 1/8 inch.
some user like to use space as separator between foot and inch and some other like to use dash.
Bottom line I stocked. Is there any function for this in autocad ?
when I look at my code I just struggled with pure string. I thought maybe there is something in autocad which give developer this option. Like the way we input dimension in command prompt.
View 9 Replies
View Related
May 15, 2012
I'm sure this has been addressed in these hollowed posts but a search didn't turn it up. I have a dimstyle with primary units format set to "Fractional" and would like the inch (") marks to come in. I know i can add the inch mark as the suffix, but is there a better way? Archetectural and Engineering formats both include the inch marks and this makes sense to me. But if "fractional" format is not inches, then what would it be?
View 9 Replies
View Related
May 20, 2012
we are using acad 2006 to create drawings and saving them in dxf on 3.5 inch disc we then import the drawing into winner90 software on our router m/c but get the same response each time on loading - too many lines in iso file-
View 3 Replies
View Related
Jul 8, 2013
I have a spreadsheet and iLogic driven mater assy to generate different iterations.
I would like to change the scale of a base view on a drawing based on a parameter in my assembly. The idea is to get iLogic to change the view using a simple If / Else statement.
This is what I tried:
If Parameter("0 Generic Assembly v2.2.iam.BP") < 1570 Then
ActiveSheet.View("VIEW1").Scale = 1/8
Else
ActiveSheet.View("VIEW1").Scale = 1/10
EndIf
So basically the value of "BP" parameter (excel parameter in my assy) would drive the scale of the views. But its not working. Is it actually a sensible method? Can I use in the drawing environment the excel parameters in my assembly?
This is the error message I get when the rule is run:
"Error in rule: View Scale, in document: 0 Generic Assembly v2.2.idw
Unspecified error (Exception from HRESULT: 0x80004005 (E_FAIL))"
Also using the same thinking I use iLogic to populate the drg number field on the drawing based on an excel parameter. The rule works but does not always updates the drawing no upon the parameter change or update/rebuild commands.
View 1 Replies
View Related
Nov 16, 2011
How do I create an Inventor part with a cost that will update according to the part dimensions changing. For example, we design products using aluminum extrusions and our cost is determined by foot length. How can I create the extrusion part to have a per foot cost that will dynamically update when I change the parts length for an assembly? It seems to me to be a fundamental need for many industries.
I will happily take any links to information that will explain this process. I cannot find anything online that clearly explains the process of creating parts with costs and variables.
View 1 Replies
View Related
Oct 11, 2013
I think that our file has been corrupted. We tried to adjust the elevation of a 6-inch sewer pipe in the profile and then the display of the pipe went up to a 12-inch, even though the pipe properties still show it as a 6. All the other pipe sizes seem to be working, though we did have a similar problem with 4-inch pipe the day before and fixed it with an audit. Audit does not fix this problem. It seems to apply to all six inch pipes.
The file was created in Civil 3D 2007. We are now using C3D 2012 with SP1. My machine is 64-bit but the other person working in the file has 32-bit.
I have attached the file and the pipe in question is in the sewer network and is named SP B 11.
Is there any hope for this file? Of course this is right as we are trying to meet a deadline.
PS I tried to add the file but was size restricted, then I trimmed the file down to under 1.5 MB and was still size restricted.
View 3 Replies
View Related
Mar 1, 2013
Trying to get the tolerance on a hole to be what I want. I changed the tolerance on the hole, but my idw did not change. When I went back and looked at the tolerance on the hole, it was back to the original value. No matter what I do, it will not change to what I want it to be in the part. Here is a short video.
The dimension I am changing is .9688 and it keeps jumping back to .9686 when I go back into the hole tolerance.
Tried other values too and they would not take either...
Entered Value Inventor Value
.9688 .9686
.9690 .9686
.9693 .9696
.9695 .9696
Windows 7 x64 -12 GB Ram
Intel i7-930 @ 3.60ghz
nVidia GTS 250 -1GB (Driver 301.42)
INV Pro R2013, SP1.1 (update1)
Vault Basic 2013
View 6 Replies
View Related
Sep 27, 2013
When labeling pipes in a pipe network; is there a way or expression to roundup the label to 6 inch interval. For example, if I have a pipe length of 2.6 feet, I want to roundup this to 3.0 feet and if I have a pipe length of 2.4 feet, I want to roundup this to 2.5 feet.
View 7 Replies
View Related
Mar 1, 2012
What is the optimal number of dpi/inch or dpi/cm to work and to plot a 3m x 0.8m paper /photo paper/ orapaper , RGB or CMYK, are there plotters optimizeds to plot from RGB better CMYK ?
View 10 Replies
View Related
Dec 3, 2012
I am using photoshop to stack 2 frames 12x16 in a 44 inch roll
View 8 Replies
View Related
Nov 9, 2004
while i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
View 9 Replies
View Related
Nov 17, 2006
I'm having trouble printing an image that's longer than 11 inches. I have a Canon i560 printer, and use either PS 7 or PS CS.
I want to print an image that's 6 x 16 inches, using 13x19" paper that I've cut in half the long way. I specified Custom (for size), and got approximately the correct width, but it stops printing after 11 inches. I also tried printing a JPG version of the image using WindowsXP print utility, and it allowed me to specify a custom size, but it also stops printing after 11 inches in length.
View 2 Replies
View Related