Photoshop :: Amount Of Pixels In An Inch
Nov 9, 2004
while i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
View 9 Replies
ADVERTISEMENT
Dec 16, 2012
I am needing to deliver to a software company one VERY long PNG that contains different animated states or steps of a volume knob for a user interface.
I have 127 animated steps/states in 127 PNG files. SO what I need to do is to discover an action or automated way that I can import each file in, then move it +X amount of pixels.
Specifically it's a 40px by 40px volume knob and there needs to be a 1px space in between each state. SO... basically... that means my end result document would be a 5,207px width document (40 times 127 plus 127).
Does this make sense?
My goal is to find the most efficient way of doing this. I was able to create the many different file states from After Effects.
View 4 Replies
View Related
Mar 24, 2012
i'm not good using photoshop, i just installed the pre realease cs6 and trying to find a way of shrinking the marquee selection by certain amount of pixels from the selection border i found expand selection but it doesn't allow me to type nigative value
View 10 Replies
View Related
Jan 21, 2013
I need to make a texture for google SketchUp that can be imported into RCT3. But the amount of pixels need to ve a square. Eg 256 x 256. How do I do this?
View 1 Replies
View Related
Dec 19, 2011
Often, especially when I'm working with screenshots, I'd like to be able to set the canvas size, and then paste in a larger image and move it to a specific point. This would allow me to automatically cut out the Windows portion of the screenshot, menu bars, scroll bars, whatever, while still keeping the actually interesting pixels in the same place from screenshot to screenshot.
In the past, what I've done is essentially to create a selection mask:
Prep:
Paste the image into the backgroundCreate a 2nd layerSelect over the interesting pixels on the image in the 2nd layerInvert the selection in the 2nd layer and fill it with a solid colorRepeat:
Make a magic wand selection of the un-colored pixels in the 2nd layerSwitch to the background and copy the selection to the clipboardWork with the copied pixels (in another Paint.Net window, or another program)
Paste the next image into the backgroundSwitch to the 2nd layerBecause of the manner in which Paint.Net handles the canvas, this workflow would be greatly simplified if I could programmatically move pixels:
Prep:
Select the interesting pixels in the first imageCrop to SelectionRepeat:
Work with the pixels remaining on the canvasPaste the next image (select "Keep Canvas Size")Shift Pixels so that the interesting portion of the image is on the canvasI looked through the entire menu structure in 3.5.10 several times, and didn't see anything that would obviously produce this transformation. I'm aware of the Ctrl+<arrow> method for moving by 10px, which is certainly better than just using the arrow keys. And I've seen references to the Panelling effect plugin which performs a similar function, but (without having tried it) I expect it would not produce the desired effect if I wanted to create negative/empty space on one or two sides of the shifted pixels, or if one of my images was smaller than the total desired area.
Is this already available in Paint.Net, and I just missed it? Or is there a plugin that accomplishes this specific transformation without additional side effects?
View 3 Replies
View Related
May 21, 2013
I would like to display actual document sizes (real inches as in 5" X 7") in the print module in Lightroom. I can calibrate pixels per inch for my monitor in Photoshop but can't figure out how to do it in Lightroom - i.e. on my 24" monitor 94 pixels per inch will display my print size document in it's real size on my screen.
View 5 Replies
View Related
Mar 16, 2012
Somehow I must have activated an option to only be able to move any object a certain distance at a time. For example, I have a circle that I want in a certain position but I can not move it there with my mouse. Instead it insists on moving 18,9 pixels in any given direction whenever I'm moving it with my mouse. To get a specific position I have to enter its position manually.
View 4 Replies
View Related
Apr 29, 2011
I have a big wallpaper and i would like to set the firm logo in the left bodom corner with something like 40 pixel from the left border en 100 pixels from the bodom corner.
View 1 Replies
View Related
Dec 3, 2012
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies
View Related
Apr 5, 2012
how to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies
View Related
Jan 25, 2013
Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies
View Related
Oct 7, 2013
If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
View 8 Replies
View Related
Sep 12, 2005
If I am constantly making frames in photoshop for use in the video world (ie. They will be on TV) the pixels need to be rectangular (or 4x3) in aspect and not square.
I know in programs like After Effects and Combustion you can set when saving an image whether or not it is square or rectangular pixels.
How do I do this in Photoshop if it can be done?
View 1 Replies
View Related
Oct 15, 2012
2 days on GIMP. I need to adjust the clone tool so it's 1080 pixels vertical and about 20 pixels wide. I googled and searched, but I can't seem to find the right phrasing.
View 19 Replies
View Related
Feb 5, 2013
I have several layers in an image, and I need to align them precisely. The ordinary layer shift ("move pixels") by multiples of pixels is not sufficient. Is there a tool or plugin for PDN that allows sub-pixel shifts (i.e. moves by fractions of pixel)? And rotations by very small angles?
View 6 Replies
View Related
Dec 6, 2012
I've just started using Xara to edit my photos. I have a problem I can�t solve: how can I export the edited photos with 72 dpi and 843*403 pixels;or 72 dpi and 404*404 pixels?
View 9 Replies
View Related
Mar 1, 2012
What is the optimal number of dpi/inch or dpi/cm to work and to plot a 3m x 0.8m paper /photo paper/ orapaper , RGB or CMYK, are there plotters optimizeds to plot from RGB better CMYK ?
View 10 Replies
View Related
Aug 26, 2013
I know methods of reducing number of colors to 255 or 3. However I would like to experiment with values above 255. Is there any method of doing so by exact number ? Or at least by visually checking when using sliders?
View 1 Replies
View Related
Feb 1, 2013
Been combing over the interent to try to figure out how to (in CS6 PS) get multiple gif to load onto the same static image that have different amount of frames, thus far I have my two gifs (on opposite sides) on the image and a short title video in the center but it starts with all three images and then runs the two gif until the the first (8 frames) runs out then the remainder of the second runs out at 13 frames and lastly the rest of the video plays each frame.
My goal is to get the video to just play naturally in the center and each gif on the sides to play on a loop as I want the entire image to be a banner for a website.
Win7 64 bit
CS6 photoshop
Gif1 = 8 frames/layers
Gif2 = 13 frames/layers
video = 96 frames/layers (also it is set at a very low resolution and is just a title with a second title transitioning in)
View 3 Replies
View Related
Mar 22, 2012
I am using the histogram function in PS CS4 for Windows. I am using the magic wand tool to choose numerous "green" elements (for example). As I choose more and more elements, the pixel amount goes up in the histogram table. For some weird reason, when I choose enough elements to hit around 50000 pixels, the amount reverts to 12000 and goes to "cache level 2". I need to be able to have a total of all my elements for the project I'm working on. Is this a memory issue? How can I increase the cache?
View 1 Replies
View Related
Jan 3, 2007
is there a fast way to resize a large amount of images?
View 2 Replies
View Related
Oct 27, 2008
I bought Photoshop CS3 and have a photography studio. I have 4 computers to do my editing on and when I tried to dowload the program to the last computer it says that I have reached my maximum amount of downloads or something like that. It won't let me register it and it tells me that I have to de-activate one of them to register the last computer. Am I going ot have to go out and actually purchase yet another copy of PS CS3 to have it on that other computer? Is there a discounted price or do I actually have to pay full price to add it to one more computer?
View 6 Replies
View Related
Dec 3, 2012
I am using photoshop to stack 2 frames 12x16 in a 44 inch roll
View 8 Replies
View Related
Nov 17, 2006
I'm having trouble printing an image that's longer than 11 inches. I have a Canon i560 printer, and use either PS 7 or PS CS.
I want to print an image that's 6 x 16 inches, using 13x19" paper that I've cut in half the long way. I specified Custom (for size), and got approximately the correct width, but it stops printing after 11 inches. I also tried printing a JPG version of the image using WindowsXP print utility, and it allowed me to specify a custom size, but it also stops printing after 11 inches in length.
View 2 Replies
View Related
Feb 7, 2005
I had an 11x14 document set at 175 pix/in. When printed the document was huge (probably 75% too big, maybe more). I was thinking maybe there can only be so many pixels per inch, and because I had it set too high, the dimensions of the doc. were distorted. Anyone know if there is such a magick number?
View 2 Replies
View Related
Jul 24, 2012
I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
View 23 Replies
View Related
Feb 8, 2013
I had a 3 year old imac with CS3 installed, which has failed. I have bought a brand new imac 27", but I was told in the store that this machine is too new to use CS3!
Is it the OS thats too new or the hardware? I'm happy to downgrade my ios to snow leopard or something like that.
View 2 Replies
View Related
Oct 14, 2012
It only happens after Photoshop CS6 (fully updated i Mac and CS6 - see below image for specs) has been running for awhile. The screen, in dark areas of the display, will have screen flicker like stars twinkling on a night sky. Then the display will completely go black and then back on about every 5 seconds. The only way I can make it stop is to power the i Mac off and then start it back up. Then it's fine until the next time I start Photoshop.
It doesn't do it immediately when Photoshop starts. It's usually about 30 - 60 minutes after I've started it. Also if I open Photoshop and use it and then shut it down I don't have any issues...only after it has been running for a while.
View 3 Replies
View Related
Apr 22, 2012
How do you set up a document to print 4 up on a 8.5x11 page. It is a pdf file created to print on a 11x17 page. I am using XP Pro.
View 1 Replies
View Related
May 17, 2006
I have a 7.2 MP digital camera. When I upload the images to Photoshop, they show up as 72 pixels/inch by default. How can I have them at 300 pixels/inch? I bought the camera, so I could start doing posters.
View 9 Replies
View Related
Jul 15, 2012
It happens both by dragging the file into the icon, AND opening up with control click, so i am getting this tiny window.
Of course I can enlarge by numerous command +, or magnify tool, but the idea would be to be able to open it up at a reasonable size.
The worst is when by enlarging, sometimes it turns into a rectangulAR stripe, and I have to enlarge it by pulling the bottom corner.
This happened in the past with different computers and different OS< so the fact that I have the latest Lion is not part of the issue, I hope.
I posted this in the past, unsuccesfully,
View 47 Replies
View Related
