Photoshop :: File Opening Up As A Square Inch Window
Jul 15, 2012
It happens both by dragging the file into the icon, AND opening up with control click, so i am getting this tiny window.
Of course I can enlarge by numerous command +, or magnify tool, but the idea would be to be able to open it up at a reasonable size.
The worst is when by enlarging, sometimes it turns into a rectangulAR stripe, and I have to enlarge it by pulling the bottom corner.
This happened in the past with different computers and different OS< so the fact that I have the latest Lion is not part of the issue, I hope.
I posted this in the past, unsuccesfully,
View 47 Replies
ADVERTISEMENT
Oct 7, 2013
If I try to draw a square box in any size, illustator does not make it square.
For example, if I select the Rectangle Tool, click in the art space and set the rectangle to one inch by one inch, I get a box that is 1.0003 by 1.0003
Here is a screen shot of what I am getting.
This is also happening to any rectangle and circle.
Even if I hold down shift to keep the preportions lock, it still happens.
I have check and nothing is snapping or set to snap.
This is a major issue for me as I use illustator for creating dielines and those dielines need to be very accurate.
View 8 Replies
View Related
Jul 21, 2012
After cropping a photo in cs4 i have tried hitting the return key as well as edit/crop and then my photo disappears and the image box reduces in size to about 1 inch square with no image. I have expanded the image box but nil photo. This has never happened before.
I reloaded cs4 onto my computer but the problem still exists. I have also tried out opening the file from Bridge as well as Photoshop with the same result.
View 7 Replies
View Related
Mar 24, 2012
I have actions in CS1 to open :
"Levels" window so I can individually adjust & save
"File info" window so I can individually add text & save
The former window I can move & all following windows will open in new position.The latter I can move but next image always opens centrally again. Any way to make "File info" window open off to one side?
View 1 Replies
View Related
Dec 2, 2013
How do I open a file on Mac without dialog window using a pre-defined path network? example: myfile / mytest / mytestfile.ai.
View 4 Replies
View Related
Mar 5, 2014
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit)
Adobe Illustrator CC 17.1.0 (64 bit)
View 1 Replies
View Related
Dec 3, 2012
I have created a pressure network using 8-inch diameter pipes. How would I change the 8-inch pipes to 6-inch pipes without having to recreate the network.
View 7 Replies
View Related
Apr 5, 2012
how to rescale the symbols on a drawing from 2 inch to 1 inch? For some reason I forgot this and now I am with my icons twice pick.
View 9 Replies
View Related
Jan 25, 2013
Someone would like a small 1 inch by 1 inch logo for invoices at 600 DPI. However I understand that illustrator doesnt work in DPI or PPI since it's vector. Would I have to transfer the small image over to photoshop. I did try and save a 1 inch by 1 inch logo at 600 PPI, however when I saved the image it was no longer 1 inch by 1 inch. It had increased significantly in size regardless of what file format I saved the image as.
View 10 Replies
View Related
Nov 11, 2012
I tried to export a 48x32 inch file as a jpeg at 300 dpi from CS6 (very basic file).
Immediatly got the message that Illustrator was unable to export at this resolution.
So, I opened the same file in CS5 and it exported it under the same settings with no issue at all?
Does this mean that CS6 export is worse that it was in CS5?
View 25 Replies
View Related
Mar 2, 2013
I am getting horizontal white lines one inch apart when I print an Ai file
View 13 Replies
View Related
Feb 7, 2013
I'm currently using Photoshop to stitch together many images at once, so I often open 6+ images at once. As it takes a little while for Photoshop to open all these images, I would like to use another application (web browsing, typing in a document, etc.) while Photoshop is loading.
However, every time Photoshop opens a new image, the computer switches back to the Photoshop window, making it very difficult to use some other application. Is there a way to disable this switching, either in the OS or Photoshop? I'm currently running Win7 64-bit and Photoshop CS5 Extended 64-bit.
View 1 Replies
View Related
Nov 8, 2013
When I open a picture in photoshop, the window is not big enough to show it all. When I drag it to my retina monitor on my laptop, it scales down. Why can't adobe figure this stuff out? It used to be that your image would open as large as possible on your monitor, and would show the entire image.
If it was larger than your monitor could display, it would scale it to 66.7% or 25% etc so it would fit. I liked that better than this way - now you just see the top corner of your image and have to drag the window larger to see it.
View 1 Replies
View Related
Dec 9, 2008
Before PS4, I could open image files in their own windows. In PS4, when I want to open more than one file, these open with tabs and any new file I open is added to the tab queue. It is annoying to right click on each tab so each file is in its own window. Is there a universal preference to change this annoying behavior?
Using a Windows environment with Photoshop CS4 Extended.
View 1 Replies
View Related
Aug 21, 2009
I just began having problems with Photoshop today. I wanted to apply Blending Options to a layer. The Layer Style window opened but it was nowhere to be found! Because I could not access this window to either perform a task or close it, I had to Control/Alt/Delete because nothing else in the program would work. Obviously, it was waiting for a response to the window but as I couldn't see it, I couldn't access it. I've never had this problem before and I've just spent four hours trying to find the problem, including messing with screen resolutions and monitor designations (I use a laptop with a flat screen as #2 monitor). Can someone please help me!!Thanks, in advance, for your advice.
View 3 Replies
View Related
Jul 3, 2012
The Application Frame window opens up too tall on both my monitors. I cannot resize it nor access any of the tools at the bottom. Is there any other way to resize it except by grabbing it with the cursor and dragging the edge, since obviously I cannot do that when it sits offscreen?
View 4 Replies
View Related
Apr 25, 2012
sometimes (there is no rule) when i'm opening a Color Picker window and moving cursor on the palette - my internet browser opens Adobe site.When i try to get back to PS it immediately starts another tab, and another it takes less than 1 second..
View 4 Replies
View Related
Aug 4, 2011
I created this little building with a pitched roof. at the 1st level I had no problems putting in openings for windows and doors, but now i created the roof and I want to put in window at front and back of the building and the window shows only up when I hold the cursor over it. what step am i missing? At one point i also got the message "rectangular opening does not cut its host"
View 2 Replies
View Related
Dec 21, 2012
Is it possible to have window opening in two parallel walls? the window crosses to the other wall which is not host wall anymore..
View 5 Replies
View Related
May 31, 2006
Is there a way to open more than one acad drawing without having to open multiple acad windows? Sort of like word. You only have one window open and you can toggle between many files.
I have acad 2004.
View 9 Replies
View Related
Aug 21, 2012
Version: Autodesk Inventor 2013 , Vault Pro 2013
I am trying to open/checkout files from windows explorer and vault but they are being opened in a new inventor window instead of the same client that I had running beforehand. This problem just started today and I have not made any updates or changes.
View 1 Replies
View Related
Jun 14, 2012
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies
View Related
Apr 28, 2012
Incorrect brick pattern renders around window openings, refer attached.
View 4 Replies
View Related
Oct 9, 2012
I am starting a football pool and I can't find a PSD template. where I can find one?
View 4 Replies
View Related
Mar 22, 2013
I used the free select tool to free select an area of an image that is not a square (odd shape), how do I make that selection a perfect square if pasted to new image or new layer??? rectangular would be fine too...
View 14 Replies
View Related
Apr 17, 2012
All of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies
View Related
Feb 16, 2010
How I can update my diesel expression to display the area in square feet not square inches. See expression below.
^C^Cattdia;0;_-insert;AREABLK;1;1;0;$M=$(getvar,AREA);attdia;1
View 9 Replies
View Related
Dec 13, 2012
When you open a file or import a file the preview window image is blurred. It was not that way in X5.
View 1 Replies
View Related
Sep 13, 2012
I used to be able to just open any image and my copyright info would be inserted into the file data. I guess it was a droplet, "when the file is opened or created then add file info from a xmp file". I still have the xmp file with all the data in but i am unsure how to implement it being automatically opened and added to the file when i create a new one? I thought i could handle it, i assume its a droplet of some sort.
View 5 Replies
View Related
Apr 21, 2013
When trying to open a raw file in PSE 5 I receive the following error message
“Could not complete your request because the file format module cannot parse the file”
I checked and my camera Nikon D3100 is listed as a supported camera.
View 1 Replies
View Related
Jun 3, 2013
I just worked on a pic in gimp, went to save as, the file appeared just a white square, the pic did not come up.
I tried a few tricks to convert to jpeg, no luck. IT ONLY creates files Ive never heard of xcf, etc. is there no way to get a good jpeg file?
View 3 Replies
View Related
