I created this little building with a pitched roof. at the 1st level I had no problems putting in openings for windows and doors, but now i created the roof and I want to put in window at front and back of the building and the window shows only up when I hold the cursor over it. what step am i missing? At one point i also got the message "rectangular opening does not cut its host"
When I insert a new window into an exterior wall in the proposed phase, the demo phase drawings shows dashed lines on the faces of the wall, but no dashed lines running through the wall on the left or right of the window. This makes it very hard to tell where the demo opening should be. Attached is a screenshot of this issue.
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
I modified a Window Family file by adding a Window inset parameter. When I inserted the window into a wall, otherwise the window worked fine, but when I changed the window's Window Inset value, the frame depth changed instead of the frame's location. The frame was originally made by Sweep tool, but now when I made it by Extrusion tool, the window works fine. Anyway, for future purposes, I would like to know how to be able to use the Window Inset parameter with a frame made by Sweep tool. How do I lock the depth of the frame sweep?
I'm currently using Photoshop to stitch together many images at once, so I often open 6+ images at once. As it takes a little while for Photoshop to open all these images, I would like to use another application (web browsing, typing in a document, etc.) while Photoshop is loading.
However, every time Photoshop opens a new image, the computer switches back to the Photoshop window, making it very difficult to use some other application. Is there a way to disable this switching, either in the OS or Photoshop? I'm currently running Win7 64-bit and Photoshop CS5 Extended 64-bit.
When I open a picture in photoshop, the window is not big enough to show it all. When I drag it to my retina monitor on my laptop, it scales down. Why can't adobe figure this stuff out? It used to be that your image would open as large as possible on your monitor, and would show the entire image.
If it was larger than your monitor could display, it would scale it to 66.7% or 25% etc so it would fit. I liked that better than this way - now you just see the top corner of your image and have to drag the window larger to see it.
Before PS4, I could open image files in their own windows. In PS4, when I want to open more than one file, these open with tabs and any new file I open is added to the tab queue. It is annoying to right click on each tab so each file is in its own window. Is there a universal preference to change this annoying behavior?
Using a Windows environment with Photoshop CS4 Extended.
Is there a way to open more than one acad drawing without having to open multiple acad windows? Sort of like word. You only have one window open and you can toggle between many files.
I am trying to open/checkout files from windows explorer and vault but they are being opened in a new inventor window instead of the same client that I had running beforehand. This problem just started today and I have not made any updates or changes.
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
"Levels" window so I can individually adjust & save "File info" window so I can individually add text & save
The former window I can move & all following windows will open in new position.The latter I can move but next image always opens centrally again. Any way to make "File info" window open off to one side?
I just began having problems with Photoshop today. I wanted to apply Blending Options to a layer. The Layer Style window opened but it was nowhere to be found! Because I could not access this window to either perform a task or close it, I had to Control/Alt/Delete because nothing else in the program would work. Obviously, it was waiting for a response to the window but as I couldn't see it, I couldn't access it. I've never had this problem before and I've just spent four hours trying to find the problem, including messing with screen resolutions and monitor designations (I use a laptop with a flat screen as #2 monitor). Can someone please help me!!Thanks, in advance, for your advice.
The Application Frame window opens up too tall on both my monitors. I cannot resize it nor access any of the tools at the bottom. Is there any other way to resize it except by grabbing it with the cursor and dragging the edge, since obviously I cannot do that when it sits offscreen?
sometimes (there is no rule) when i'm opening a Color Picker window and moving cursor on the palette - my internet browser opens Adobe site.When i try to get back to PS it immediately starts another tab, and another it takes less than 1 second..
All of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
When I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit) Adobe Illustrator CC 17.1.0 (64 bit)
I would like to create transparent graphics for window decals which should remain transparent after being printed on foil. By transparent I mean see-through, e.g. a set of light grey lines that you could actually see through.I am NOT asking how to create graphics with no white background, I would like the actual grey line to be semi see-through. Is this as simple as changing the opacity settings and is it something that is even design related or it is something that is done during the printing process itself?
I have a minor problem with creating some polygons on the edge of the window - inner and outer side. As you can see here: I need to connect neighbouring vertex and I do not want to do it manually by creating polygons one by one. Isn´t there any modificator in max I could use to do that automatically??
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
i have tried installing and reinstalling twice and it has not fixed my problem. have so many uses for photshop on a daily basis and this just stops them. I have the newest update for Photoshop CC the photoshop i am using it also does not work with he 64 bit or the normal version.
We have a family that errors when certain values are hit. Its realated to Automatic Sketch Dimension reassociating with work planes when two workplans over lap... Anyway, the QA team knows about this.
The problem I have is that I have an IF statement to trigger an generic error message when these two rare conditions are met. I would rather a pop up window explaining what thy can not do. "Position of legs from ends can not equal half total length" and an OK button.
Is there a "say" style command for revit formulas?
I'm a relatively new user to Revit (almost a year). My issue is that all of a sudden my view control bar is located so far to the left in the view window, the project browser almost covers it. I know that I can move the project browser window so that isn't all that critical. My concern is that when I want to look at a schedule it also is so far to the left of the screen I have to move the other windows to see it.
I have several window types in my project. Let's say that the window is 3'-0" wide by 4'-8" high - Mark #1. I want to group three of these windows and schedule the group as Mark #2 - not three separate #1 windows. How do I set up the three windows together to become a single window schedulable for the entire opening of the three windows grouped together so that the opening would read 9'-0" wide?
Cannot insert any window in this wall (its 140mm blockwork single skin trimmed to the roof above) and tried different window families. Yet I can cut an opening and also insert any door.
how to center a window seat that extends out like a bay window. I cannot for the life of me figure this out. I am trying to center the 6' extension between an exterior (7 1/4") and interior (4") wall. I need it to be center on both interior and exterior and do not know where to measure from to accomplish that.