Before PS4, I could open image files in their own windows. In PS4, when I want to open more than one file, these open with tabs and any new file I open is added to the tab queue. It is annoying to right click on each tab so each file is in its own window. Is there a universal preference to change this annoying behavior?
Using a Windows environment with Photoshop CS4 Extended.
I'm currently using Photoshop to stitch together many images at once, so I often open 6+ images at once. As it takes a little while for Photoshop to open all these images, I would like to use another application (web browsing, typing in a document, etc.) while Photoshop is loading.
However, every time Photoshop opens a new image, the computer switches back to the Photoshop window, making it very difficult to use some other application. Is there a way to disable this switching, either in the OS or Photoshop? I'm currently running Win7 64-bit and Photoshop CS5 Extended 64-bit.
Version: Autodesk Inventor 2013 , Vault Pro 2013
I am trying to open/checkout files from windows explorer and vault but they are being opened in a new inventor window instead of the same client that I had running beforehand. This problem just started today and I have not made any updates or changes.
When you open a file or import a file the preview window image is blurred. It was not that way in X5.
View 1 Replies View Relatedwhen i open any image in Photoshop CS4 in my computer they appear like this :
If i open the image in another software it's all ok.
I've already reinstalled photoshop but everything still the same.
When I open a picture in photoshop, the window is not big enough to show it all. When I drag it to my retina monitor on my laptop, it scales down. Why can't adobe figure this stuff out? It used to be that your image would open as large as possible on your monitor, and would show the entire image.
If it was larger than your monitor could display, it would scale it to 66.7% or 25% etc so it would fit. I liked that better than this way - now you just see the top corner of your image and have to drag the window larger to see it.
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
It happens both by dragging the file into the icon, AND opening up with control click, so i am getting this tiny window.
Of course I can enlarge by numerous command +, or magnify tool, but the idea would be to be able to open it up at a reasonable size.
The worst is when by enlarging, sometimes it turns into a rectangulAR stripe, and I have to enlarge it by pulling the bottom corner.
This happened in the past with different computers and different OS< so the fact that I have the latest Lion is not part of the issue, I hope.
I posted this in the past, unsuccesfully,
I have actions in CS1 to open :
"Levels" window so I can individually adjust & save
"File info" window so I can individually add text & save
The former window I can move & all following windows will open in new position.The latter I can move but next image always opens centrally again. Any way to make "File info" window open off to one side?
I just began having problems with Photoshop today. I wanted to apply Blending Options to a layer. The Layer Style window opened but it was nowhere to be found! Because I could not access this window to either perform a task or close it, I had to Control/Alt/Delete because nothing else in the program would work. Obviously, it was waiting for a response to the window but as I couldn't see it, I couldn't access it. I've never had this problem before and I've just spent four hours trying to find the problem, including messing with screen resolutions and monitor designations (I use a laptop with a flat screen as #2 monitor). Can someone please help me!!Thanks, in advance, for your advice.
View 3 Replies View RelatedIn the program window, it looks like its been pushed way in on the full image in the source window. No matter what I do, I can't get it to appear the same as in the source window...
View 4 Replies View RelatedThe Application Frame window opens up too tall on both my monitors. I cannot resize it nor access any of the tools at the bottom. Is there any other way to resize it except by grabbing it with the cursor and dragging the edge, since obviously I cannot do that when it sits offscreen?
View 4 Replies View Relatedsometimes (there is no rule) when i'm opening a Color Picker window and moving cursor on the palette - my internet browser opens Adobe site.When i try to get back to PS it immediately starts another tab, and another it takes less than 1 second..
View 4 Replies View RelatedI created this little building with a pitched roof. at the 1st level I had no problems putting in openings for windows and doors, but now i created the roof and I want to put in window at front and back of the building and the window shows only up when I hold the cursor over it. what step am i missing? At one point i also got the message "rectangular opening does not cut its host"
View 2 Replies View RelatedIs it possible to have window opening in two parallel walls? the window crosses to the other wall which is not host wall anymore..
View 5 Replies View RelatedIs there a way to open more than one acad drawing without having to open multiple acad windows? Sort of like word. You only have one window open and you can toggle between many files.
I have acad 2004.
I have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies View RelatedIncorrect brick pattern renders around window openings, refer attached.
View 4 Replies View RelatedHow do I open a file on Mac without dialog window using a pre-defined path network? example: myfile / mytest / mytestfile.ai.
View 4 Replies View RelatedAll of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies View RelatedWhen I double-click an AI-file to open it, Illustrator resize/minimize it's own window. Sometime so much that Illustrator itself reply with the error: "Can't open the Illustration. There is not enough room for the window; Increase document area and try again."
If I open a file (browse for it) from within Illustrator it works fine and Illustrator keeps whatever windows-size I have chosen.
Windows 7 Professional (64 bit)
Adobe Illustrator CC 17.1.0 (64 bit)
using Photoshop 5.0 or 7.0
I want to have a gif animation working on a web page - and I want to put a window frame around it so it seems like you are watching the animated image through a window looking into a house. (like a window peeper)
What I need to do is take out the four window pains (or all if I have to) to make the actual pains transparent to show the gif image working.
I am not sure how I can get to superimpose the window frame image OVER the gif image.
The entire image is what is blinking, while the photoshop tools remain on.
View 5 Replies View Relatedusing element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedMy main user folder on the iMac is set to be shared (read/write, including all enclosed files) with my MacBook Pro. The job is a series of one-page InDesign files (they are newspaper advertisements). The IDD files contain a series of Illustrator files with linked PSD files.The idea is that we can both work on the .idd and .ai files in the same folder at the same time.
It's all working fine EXCEPT that whenever an .ai file is opened on the MacBook, Illustrator doesn't know where the linked PSD files are. We can update the link, but when the .ai file is then opened on the iMac and saved, the same thing happens the next time it is opened on the Macbook.
I don't want to embed the PSD files into the .ai files as sometimes I have to modify them and they can be linked to up to 20 .ai files.
G5 iMac OSX 10.7.5 / Macbook Pro OSX 10.8.2 / networked via FireWire cable / file sharing on, laptop user has Administrator status, all files are read/write, permissions include all enclosed files / CS6
Date/Time: 2013-04-07 14:58:28 +0200
OS Version: 10.7.5 (Build 11G63b)
Architecture: x86_64
Report Version: 9
Command: Illustrator
Path: /Applications/Adobe Illustrator CS6/Adobe Illustrator.app/Contents/MacOS/Adobe Illustrator
Version: 723 (16.0.0)
Parent: launchd [132]
PID: 10493
Event: hang
Duration: 0.83s
Steps: 10 (100ms sampling interval)
Pageins: 19
Pageouts: 0
Since I updated to CC I've had a bug that drives me a little nuts. Because I have a Retina MacBook Pro connected to an Apple Thunderbolt display, Photoshop seems to get confused about the size of the window to open. It thinks it should be sized to fit on the Retina screen (which I use as secondary), but at 100% on the non-retina screen (the primary display).
The end result is that every time I open a document the window is only showing the top quarter of the document I'm opening. I always have to hit command plus, command minus to get it displaying right.
In older versions of PSE I was able to open two picture files in the same window by just resizing them smaller so that I could deal with them side by side........I couoldn't do it in PSE=10, and I upgraded to PSE11 and still don't know how to do it.
View 4 Replies View RelatedI'm using the student edition of PS6 Extended. The settings are Window>Arrange>Float all in windows. There were two image boxes open, and both of them were plastered against the left side of the screen, and every time I grabbed one to move it, it slipped back to the left as soon as I released it, and in ever-increasing increments, to the point where I couldn't even see the picture anymore.
View 4 Replies View RelatedI recently purchased CS6 and loaded it to my desktop PC running Windows 7 and everyhing is fine.
I recently purchased a new laptop and loaded a second copy to it (running Windows 8). When I process a RAW file and try to open it in PS6 about every 4th file does not appear in the PS6 workspace. The file details show in the top left corner, the background layer appear, I supposedly can save this file but I cannot see anything. When I close PS6 and re-open it and re-open the ACR file, then open to PS6 if works fine.
I have Photshop CS6 Extended but when I click on the .cr2 which is the RAW file I keep getting an error message "Could not complete your request because it is not the right kind of document"
I have tried installing the camera raw plugin Photoshop Camera Raw 7.1
Installation failed. Error Code: U44M2P7