Photoshop :: Creating See-through Graphics For Window Decals?
Sep 5, 2013
I would like to create transparent graphics for window decals which should remain transparent after being printed on foil. By transparent I mean see-through, e.g. a set of light grey lines that you could actually see through.I am NOT asking how to create graphics with no white background, I would like the actual grey line to be semi see-through. Is this as simple as changing the opacity settings and is it something that is even design related or it is something that is done during the printing process itself?
View 1 Replies
ADVERTISEMENT
Aug 7, 2012
I have all my pipe decals in excel per ANSI standards (see attached). Do I realy have to create 64 separate files for each decal?
View 8 Replies
View Related
Aug 4, 2011
I created this little building with a pitched roof. at the 1st level I had no problems putting in openings for windows and doors, but now i created the roof and I want to put in window at front and back of the building and the window shows only up when I hold the cursor over it. what step am i missing? At one point i also got the message "rectangular opening does not cut its host"
View 2 Replies
View Related
Feb 14, 2012
I am trying to put a deck layout decal onto a surface. When selecting the decal command, inventor will only allow me to select the bottom surface and not the top one where I want the decal. is this achievable.
I can do it by flipping the normal and putting on a mirrored image for my decal but that seems like a lot of work
if you create a new part with a cube, sketch onto one of the surfaces and add an image, the decal will only attach to one of the availiable 2 surfaces
View 1 Replies
View Related
Aug 11, 2011
I have an elevation which requires stone panels to be installed. The elevation was created in a single part using the multi-body method. Photographs were taken of the stone slab and modified, it was turned into a BMP with a low res. of about 75. (Tried to keep everything small). As I begin to apply the texture of the stone with the decal method (due to proper positioning and scale size) Inventor starts to run very slow and pauses (Not Responding). The more decals I apply the more it stop working. I don't understand why this process is utilizing 7 GB of ram.
My Spec's:
Operating System
MS Windows 7 64-bit SP1
CPU
Intel Core i5 760 @ 2.80GHz 41 °C
Lynnfield 45nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 661MHz (9-9-9-24)
Motherboard
Intel Corporation DH55TC (XU1) 43 °C
Graphics
SyncMaster (1920x1200@59Hz)
NVIDIA Quadro FX 580
LogMeIn Mirror Driver
Hard Drives
488GB Western Digital WDC WD5001AALS-00E3A0 ATA Device (SATA) 45 °C
View 9 Replies
View Related
Apr 9, 2010
We use decals on some of our parts, but every time someone opens a part or an assembly with one of these parts, it wants to be updated. This only happens with parts that have decals on them. We use Vault and the constant updating of these parts is a pain, considering these parts have not been changed...
the .bmp is in the project workspace and vaulted. The link shows as resolved... MS Paint is the default editor...so what needs to be updated? Is there any way to tell what it wants to update?
After checking it out and updating only the .ipt is modified the .bmp that resides in the 3rd Party folder is unchanged. What am I missing?
IV 2010_Vault 2010
Windows XP Pro SP2
2.00 GB RAM
NVidia Quadro FX 4000SDI
View 9 Replies
View Related
Aug 28, 2013
And this is a personal project. I want to set up my 2013 Pilot with windows graphic that you can see out of from the inside. Anyways. I cant find exact dimensions to the windows, and it's angled and rounded cornered and I need figuring out a way to make a template I can use for my window design in the future, I will also need to do the rear hatch window as well.
View 4 Replies
View Related
Sep 4, 2012
I have a minor problem with creating some polygons on the edge of the window - inner and outer side. As you can see here: I need to connect neighbouring vertex and I do not want to do it manually by creating polygons one by one. Isn´t there any modificator in max I could use to do that automatically??
View 1 Replies
View Related
May 4, 2012
I have autodesk inventor 2012 and I'm building an assembly of an air compressor. One big part is coloured yellow and has on both sides decals with an image on them.
When I open my assembly file, the part is there in my assembly but it is coloured gray and no decals are visible, if I open the part with the decals it shows perfectly, So if I use replace and put the original file back in there, it's fixed, until I close and reopen the assembly ! Again the part is other colour and no decals visible ...
Have tried to delete and place the decals again, no difference...What do I have to do ?
View 8 Replies
View Related
May 9, 2011
I have some Inventor models with decals applied in Inventor. However, when these models are imported into Showcase, the decals are missing.
I just can't find any info about this in Showcase or on Google.
View 9 Replies
View Related
Nov 24, 2012
How to make Doors and Windows with AutoCad? I know that we use the W (Write Block) command and the I (Insert) command, but I don't know how to use them. I believe that we have to be able to use the specifications that are giving to us and make the doors and windows.
View 4 Replies
View Related
Apr 3, 2013
I'm using Autodesk Inventor Pro 2013.
I have a middle complexity model, with several decals (,jpg, Using Mask), projected to different parts. When I start Studio, and start rendering, Inventor hangs. The render window opens, but it freezes on Translating and soon both of the windows are not answering. I've checked th CPU. Inventor uses around 1G of ram, during regular use. When I start rendering, slowly it goes up around 5,5G, and eventually the Windows freezes. Rendering the same model without a decal works fine.
I've installed all the Windows updates, and the Inv2013 1.1 Service Pack. Nothing worked.
Windows 7 Ultimate 64bit
Intel Core i7 @ 220Ghz
6GB Dual Channel DDR3 1600MHz
nVidia GeForce GT 630M DDR3 1GB
View 6 Replies
View Related
Sep 23, 2013
When I insert a new window into an exterior wall in the proposed phase, the demo phase drawings shows dashed lines on the faces of the wall, but no dashed lines running through the wall on the left or right of the window. This makes it very hard to tell where the demo opening should be. Attached is a screenshot of this issue.
View 1 Replies
View Related
Aug 3, 2011
way to create an outline contour cut for decals? Iv'e been doing this for years and it's been a headache. I have the graphic/text, duplicate it with a thick outline. Say .25". Then Convert Outline To Object. The problem I have is that if it's a complexe graphic or line of text, a number (sometimes a large number) of the nodes are broken and I have to join them. And CD sometimes adds way too many nodes. So I have to spend a long time deleting unnessesary nodes to clean it up.
Iv'e had people suggest to use the Arrange, Shaping, Boundery function. But that doesn't allow me to make the boundery any further away from the art.
View 12 Replies
View Related
Apr 8, 2013
I am attempting to creating a complex profile of a window frame using the Edit Profile command within Sweep. It tells me that lines cannot intersect. How can I draw more that just a simple rectangular profile?
View 3 Replies
View Related
Oct 8, 2013
how do i make lines crisp when i blow up an image??
View 8 Replies
View Related
Oct 21, 2011
I'm new to photoshop, can do the basics, i'm more of a programmer, not a designer. how can i create this graphic in photoshop
View 9 Replies
View Related
Dec 3, 2006
I'm currently using v10.I have created several images that I want to use on a web site. How should I save these graphics files? When I save them out of Illustrator (either as a gif or jpeg) the image looks like crap when I put it on a page.
View 1 Replies
View Related
Apr 18, 2013
I have CorelDRAW Graphics Suite X5 trying to use PowerTrace to trace a bitmap image. The PowerTrace window does not display when I select the object; go to Trace Bitmap --> Outline Trace --> and choose one of the types to trace. No window pops up. I can only press ESC to exit the action or ENTER which does a trace but apparently a Quick trace, not giving me the chance to refine the trace.
I'm up-to-date on fixes that I know of. Version is 15.2.0.695.
View 5 Replies
View Related
Jul 23, 2003
i need to make some graphics that are drawn diagram style.
i need to make one of an ear, eye and nose, what would be the best way to go about doing this.
can i so this in PhotoShop or should i get out the pen and paper.
View 3 Replies
View Related
Apr 20, 2011
I'm having problems opening some PDF files in 12. I keep getting a corrupt file window, Will upgrading to Corel CS5 solve the issue?
View 3 Replies
View Related
Nov 23, 2011
I have a problem with the graphics window in Inventor 2012, it happens once a week now, but getting more frequent the graphics window turns white and i cant see anything, i need to re-boot to get it back.
its a new PC, Inventor 2012
Quadro FX 1700, driver 265.70
windows professional 7, 64 bit (service pack1)
View 1 Replies
View Related
Nov 10, 2011
We currently have a new Roland VersaCamm vs-420,I have created a text image with a photo printed into the text, I have done this in photoshop, when saving as an eps and i import it into corel draw x5 graphics suite, there is a white image around the text which i dont want, there is no option to ungroup and delete it, what i want to do is have a cut line around each individual letter but its selecting the whole image as one.
View 3 Replies
View Related
Mar 6, 2005
I need a plug in for photoshop 7 that will help in creating outlines from the graphics I import into photoshop.
The graphics are usually jpg.
View 1 Replies
View Related
Jan 20, 2013
Dimension Issue while Exporting.png
Why am I not getting Exact and Accurate Dimension while Exporting the file to PSD Format? Do I need to Enable or Disable something?
View 8 Replies
View Related
Mar 7, 2011
it is possible to change the background color of the application window ?
I would like the whole area outside the drawing window (the drawing page) to be grey, so that it can be clearly distiinguished from the actual drawing page, which is white, with a shadow line around the drawing page.
View 16 Replies
View Related
Nov 1, 2012
I am ready to print my stuff. But I have to manually use the pick tool in the print preview window to move my pages around so that they will print the stuff in the center of the pages.
I do my print run. And then save the "Print style".
Come back the next day and I have to re-do all the adjusting of the work again so that it all gets printed. I would have thought that saving a print style would make it so that next time everything is the same as before.
View 2 Replies
View Related
Oct 19, 2011
I am wondering, if is possible to move content of print preview window. View picture for better understanding. In version X4 it was possible.
View 1 Replies
View Related
May 3, 2012
Is there a way to easily and quickly extract all commands listed as well as the icons? I hate pressing F8 at startup!
View 1 Replies
View Related
May 11, 2012
While making selection by drawing a selection window, the objects often get seelected and get dragged. These objects lie on the starting vertex of the selection window. Therefore I have to find the desired bjects to be selected in object manager lying in haphazard order. Is there a way , the objects don’t get dragged while making a selection window from left to right. That means, the objects get selected which are present in the selection window only.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 8 Replies
View Related
Nov 25, 2013
I recently decided to start using bit stream font navigator, how every when I first opened it and went through the wizard process, I wasn't thinking clearly and I had all my fonts saved to a flash drive. Well know i went to actually use the font catalog and it shows all my 400 plus fonts but there not usable. I keep getting a window that says to insert disc. Even though I have my flash drive plugged in and also moved a folder with all the fonts to my desk top, it still will not recognize the fonts. I have searched and tried a couple things with no luck. I'm running X6 on Windows 8.
View 10 Replies
View Related
