Photoshop :: How To Get Multiple GIF With Different Amount Of Frames
Feb 1, 2013
Been combing over the interent to try to figure out how to (in CS6 PS) get multiple gif to load onto the same static image that have different amount of frames, thus far I have my two gifs (on opposite sides) on the image and a short title video in the center but it starts with all three images and then runs the two gif until the the first (8 frames) runs out then the remainder of the second runs out at 13 frames and lastly the rest of the video plays each frame.
My goal is to get the video to just play naturally in the center and each gif on the sides to play on a loop as I want the entire image to be a banner for a website.
Win7 64 bit
CS6 photoshop
Gif1 = 8 frames/layers
Gif2 = 13 frames/layers
video = 96 frames/layers (also it is set at a very low resolution and is just a title with a second title transitioning in)
View 3 Replies
ADVERTISEMENT
Sep 26, 2012
So I recently created a 350 frames long animation, which I then tried to render out as an .avi using the mental ray renderer.
I have it set up in the render setup to render from frame 0 - 350, I have also chosen the output format.
Everything seems to work fine and dandy, the frames are rendered out nicely but then all of a sudden after about 40-50 frames it just stops rendering. The little window containing the progress bar just seems to disappear and in the render preview window is a half rendered image.
I have tried redoing this 3 times, but every time it just stops rendering at about the same place. The first time it stopped at frame 43, the second time at frame 47 and the third time somewhere inbetween.
View 3 Replies
View Related
Oct 18, 2012
I'm looking at a block which has multiple visibility states, 2 of which show a beam as a side elevation, where the beam can be stretched to give a length. This works well.
But I'd like to be able to have the beam stretching so the bottom flange of the beam can stretch relative to the top to give an angle to the beam end, and also have the lines representing the flanges (whose position will vary depending on the steel size) can also be stretched to give a neat cutoff.
Stretching the bottom of the bottom flange is easy, but I can't figure out how to stretch the inner lines? They would have to be moved a proportion of the distance which will vary between beam sizes/flange thicknesses, so putting in a fixed multiplication factor won't work. The mathematics to set a multiplication factor based on other elements of the dynamic block is easy, but is it possible to have such implemented on a varying basis?
Elevation showing what I want to do, and the block itself attached.
View 1 Replies
View Related
Feb 14, 2012
Adobe says, that you can select a group of frames, edit 1 frame from the group, and it will apply that for the rest of them. In order to do this, it says have one frame selected, the Shift-click another one. I had a frame selected, and then I shift-clicked another. Nothing is highlighting.
View 10 Replies
View Related
Sep 6, 2012
On a certain number of frames I want "hi" and on another number I want "bye" But the first text is on all the other frames.
View 2 Replies
View Related
Jul 12, 2008
'm using PS 3 Extended 10.0. I've imported video from Premiere & I would like to edit each frame in exactly the same way. I'd like to use the eraser tool to erase almost everything in the frames. I can do this 1 frame at a time, but there are 160 frames so it would take too long. Also, I want the erasure of each frame to be the same, & if I do it 1 frame at a time, each one will be slightly different. How can I make a uniform erasure of all 160 frames at the same time? I treid using the "actions" command, but it didn't work.
View 1 Replies
View Related
Apr 2, 2004
is there any way to use a single filter on several frames (imageready) or at least on several layers...
View 5 Replies
View Related
Jul 30, 2013
How do I edit multiple layers or frames?
I am working on a GIF and I want to change the brightness, saturation settings etc but it seems that I have to edit the frames one by one, which is extremely tedious. Is there a faster way to do this?
View 1 Replies
View Related
Jun 19, 2013
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
View 2 Replies
View Related
May 2, 2013
If a want one assembly with, lets say, 2 steelframe cases made with frame generator, and I want to have a piece of wood between them and I want to edit the position of the cases and the thickness of the wood. Then I need to do the frame generating in 2 separate assemblies and bring them together in a mother assembly?
View 2 Replies
View Related
Oct 19, 2011
I have a problem:
Movie > Create From Document > Insert From File > select multiple images and click OK = crash
Very sad. Because I have to insert over 100 frames and doing it one by one.
PP X5 SP3, Windows 7.
View 2 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Jul 3, 2013
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
View 7 Replies
View Related
Mar 1, 2012
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
View 4 Replies
View Related
Aug 26, 2013
I know methods of reducing number of colors to 255 or 3. However I would like to experiment with values above 255. Is there any method of doing so by exact number ? Or at least by visually checking when using sliders?
View 1 Replies
View Related
Mar 22, 2012
I am using the histogram function in PS CS4 for Windows. I am using the magic wand tool to choose numerous "green" elements (for example). As I choose more and more elements, the pixel amount goes up in the histogram table. For some weird reason, when I choose enough elements to hit around 50000 pixels, the amount reverts to 12000 and goes to "cache level 2". I need to be able to have a total of all my elements for the project I'm working on. Is this a memory issue? How can I increase the cache?
View 1 Replies
View Related
Nov 9, 2004
while i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
View 9 Replies
View Related
Jan 3, 2007
is there a fast way to resize a large amount of images?
View 2 Replies
View Related
Oct 27, 2008
I bought Photoshop CS3 and have a photography studio. I have 4 computers to do my editing on and when I tried to dowload the program to the last computer it says that I have reached my maximum amount of downloads or something like that. It won't let me register it and it tells me that I have to de-activate one of them to register the last computer. Am I going ot have to go out and actually purchase yet another copy of PS CS3 to have it on that other computer? Is there a discounted price or do I actually have to pay full price to add it to one more computer?
View 6 Replies
View Related
Dec 16, 2012
I am needing to deliver to a software company one VERY long PNG that contains different animated states or steps of a volume knob for a user interface.
I have 127 animated steps/states in 127 PNG files. SO what I need to do is to discover an action or automated way that I can import each file in, then move it +X amount of pixels.
Specifically it's a 40px by 40px volume knob and there needs to be a 1px space in between each state. SO... basically... that means my end result document would be a 5,207px width document (40 times 127 plus 127).
Does this make sense?
My goal is to find the most efficient way of doing this. I was able to create the many different file states from After Effects.
View 4 Replies
View Related
Mar 24, 2012
i'm not good using photoshop, i just installed the pre realease cs6 and trying to find a way of shrinking the marquee selection by certain amount of pixels from the selection border i found expand selection but it doesn't allow me to type nigative value
View 10 Replies
View Related
Jul 24, 2012
I have a few different problems with the pen tool.
1. When using the pen tool I keep finding that the shape I'm doing is slightly overlapping where I've already gone with the pen tool.If I try and go over that area again the path I've just drawn then jumps and ruins the shape I was creating.
How can I stop this from happening?
2. Also is there a limit to the amount of paths you can create and add text to? I created two paths and typed on them fine but when I added a third path it refused to type. The cursor didn't change to show I could type and if I did click on the path line and try to type jumped to my other path and typed there. All paths were on different layers and none were overlapping, but it is 3 circles inside each other that get smaller if this makes a difference.
How can I type on the third path?
3. When I have done a path and clicked stroke it is only a thin line. How can I make this line thicker?
View 23 Replies
View Related
Apr 18, 2013
I have been trying to reduce the amount of banding on the long background image on our site.
[URL].......
Seems that when I use a 1 pixel strip and repeat horizontally there is a slight amount of banding visible. Is there any good ways in Photoshop to reduce this?
View 2 Replies
View Related
Jun 9, 2012
Is there a maximum amount of tabs you can have?
View 9 Replies
View Related
Jul 2, 2011
I have written some code that draws a graph. The graph starts at the 0,0 default of AutoCad Model Space and goes +X and +/-Y. I want to redraw the labels along the X axis every time the Zoom is changed by the user, to change the text height and density of the labels. I need to know the the current Zoom in relation to the actual extents of the graph. Ideally I would like to redraw the text as a result of the "zoom event" I don't know if there is such a thing or not.
View 1 Replies
View Related
Oct 30, 2013
What was the command to increase the amount of viewports that were active in one paper space tab?
Currently hit the default limit.
View 8 Replies
View Related
Jan 21, 2013
I need to make a texture for google SketchUp that can be imported into RCT3. But the amount of pixels need to ve a square. Eg 256 x 256. How do I do this?
View 1 Replies
View Related
Dec 19, 2011
Often, especially when I'm working with screenshots, I'd like to be able to set the canvas size, and then paste in a larger image and move it to a specific point. This would allow me to automatically cut out the Windows portion of the screenshot, menu bars, scroll bars, whatever, while still keeping the actually interesting pixels in the same place from screenshot to screenshot.
In the past, what I've done is essentially to create a selection mask:
Prep:
Paste the image into the backgroundCreate a 2nd layerSelect over the interesting pixels on the image in the 2nd layerInvert the selection in the 2nd layer and fill it with a solid colorRepeat:
Make a magic wand selection of the un-colored pixels in the 2nd layerSwitch to the background and copy the selection to the clipboardWork with the copied pixels (in another Paint.Net window, or another program)
Paste the next image into the backgroundSwitch to the 2nd layerBecause of the manner in which Paint.Net handles the canvas, this workflow would be greatly simplified if I could programmatically move pixels:
Prep:
Select the interesting pixels in the first imageCrop to SelectionRepeat:
Work with the pixels remaining on the canvasPaste the next image (select "Keep Canvas Size")Shift Pixels so that the interesting portion of the image is on the canvasI looked through the entire menu structure in 3.5.10 several times, and didn't see anything that would obviously produce this transformation. I'm aware of the Ctrl+<arrow> method for moving by 10px, which is certainly better than just using the arrow keys. And I've seen references to the Panelling effect plugin which performs a similar function, but (without having tried it) I expect it would not produce the desired effect if I wanted to create negative/empty space on one or two sides of the shifted pixels, or if one of my images was smaller than the total desired area.
Is this already available in Paint.Net, and I just missed it? Or is there a plugin that accomplishes this specific transformation without additional side effects?
View 3 Replies
View Related
Feb 7, 2012
Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
View 9 Replies
View Related
Mar 16, 2012
Somehow I must have activated an option to only be able to move any object a certain distance at a time. For example, I have a circle that I want in a certain position but I can not move it there with my mouse. Instead it insists on moving 18,9 pixels in any given direction whenever I'm moving it with my mouse. To get a specific position I have to enter its position manually.
View 4 Replies
View Related
Aug 30, 2012
How do I change the amount of characters available in a Room Tag for the Room Name? What is the limit and can it be increased?
View 1 Replies
View Related
