AutoCad :: Max Amount Of Tabs?
Jun 9, 2012Is there a maximum amount of tabs you can have?
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Switching Layout Tabs By Clicking On The Tabs?
Sep 19, 2013issues switching layout tabs by clicking on the tabs?
Occasionally, clicking the Model or other layout tab results in no action, as if I'm not clicking on it.
All other controls (within and external to C3D) function normally so it's not a mouse hardware issue.
It will usually correct itself if I "restore down" the main application window, then maximize it again.
The -layout command is a workaround too.
AutoCAD VB :: Determining Amount Of Zoom?
Jul 2, 2011I have written some code that draws a graph. The graph starts at the 0,0 default of AutoCad Model Space and goes +X and +/-Y. I want to redraw the labels along the X axis every time the Zoom is changed by the user, to change the text height and density of the labels. I need to know the the current Zoom in relation to the actual extents of the graph. Ideally I would like to redraw the text as a result of the "zoom event" I don't know if there is such a thing or not.
View 1 Replies View RelatedAutoCad :: Increasing Amount Of Viewports Available?
Oct 30, 2013What was the command to increase the amount of viewports that were active in one paper space tab?
Currently hit the default limit.
AutoCad :: Copy / Paste Certain Amount Of Text?
Feb 7, 2012Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
AutoCad :: Expand A Border By Same Amount In All Directions?
Feb 10, 2011How can I expand a border by the same amount in all directions? I have this: drawing and I want to expand the green border by 275 microns. Scaling from a base point doesn't work for what I want because then the new border is not the same distance from the old one all the way around.
View 4 Replies View RelatedAutoCad 3D :: Reduce Amount Of Faces On Object?
Mar 26, 2013i downloaded a DWG from the subzero refrigerator website and i saved as a dxf and tried importing into cabinetvision and it says there is 21000 faces and takes a while to load and slow my computer down, is there anyway to reduce the number of faces?
View 1 Replies View RelatedAutoCAD 2010 :: Undersize All Holes By Specified Amount?
Apr 3, 2013I am running AutoCAD Mechanical 2010, and am curious if there is a way to decrease all the hole sizes on a given part by a set number, say .015.
I work for a sheet metal fab shop, we cut our parts with a waterjet and this requires us to undersize all the holes on the flat patterns by about .015 so they can be drilled out afterwards leaving a nicer edge finish in the holes. Some parts have hundreds of holes with multiple sizes and it can be very time consuming to undersize all the holes. My current method is to undersize one hole and then use the equal constraint to set the rest of the holes of that size to that same size.
AutoCAD .NET :: Crashing When Exporting Large Amount Of Points To CSV
Aug 8, 2012Trying to export points to a csv with the object data that is attached to the point. I can use this and it works great for smaller projects, but crashes every time when I try to export a larg amount of points. The most it has successfully exported was 9000 points but on average it usually will get to 3000 points before i get a fatal error and everything crashes.
Dim CSV_FileName As String = Nothing
' navigate to the point text csv file using a file dialog
Dim dlg As New System.Windows.Forms.SaveFileDialog()
dlg.InitialDirectory = "C:"
[Code] .......
AutoCAD Inventor :: Get The Same Part Recreated X Amount Of Times
Jul 10, 2012In an assembly, I am trying to get the same part recreated X amount of times, on the fly with iLogic, but each time with a different length.
View 6 Replies View RelatedAutoCAD 2010 :: Amount Of Time A Drawing Has Been Open
Jan 2, 2013I seem to remember a command that you could input which would show you detail info about when a drawing was originally open and how much time it the drawing had been open. But of course I do not recall what the command was.
View 6 Replies View RelatedAutoCad 2D :: Add A Specific Amount / Length To A Dimension By Using A Formula
Aug 4, 2009Is there a way to add a specific amount/length to a dimension by using a formula? For example, say I wanted to measure a length of conduit between two fittings. The clear distance between the fittings is 48" and the conduit is recessed into the fittings by 3/4" on each side. If I dimension between the fittings, normally it would read 48", but I want it to read 49-1/2" so my shop people know what length to cut.
View 9 Replies View RelatedAutoCAD Inventor :: How To Extract From Model The Amount Of Time
May 9, 2009?How can I extract from any model the amount of time it took to create it?. I remember way back that generic Autodesk had in its properties the amount of edit time per file. Does Inventor have any such file or is it located in some hidden area?
View 9 Replies View RelatedAutoCad 2D :: Convert Massive Amount Of Short Lines To One Arc
Sep 2, 2011I have a drawing which looks like it has many arcs and lines. But they are all very short lines, about 0,2mm. Is there any solution to convert massive amount of short lines (lines look like there's an arc) to one arc?
View 9 Replies View RelatedAutoCAD Dynamic Blocks :: Stretching Multiple Lines By A Different Amount
Oct 18, 2012I'm looking at a block which has multiple visibility states, 2 of which show a beam as a side elevation, where the beam can be stretched to give a length. This works well.
But I'd like to be able to have the beam stretching so the bottom flange of the beam can stretch relative to the top to give an angle to the beam end, and also have the lines representing the flanges (whose position will vary depending on the steel size) can also be stretched to give a neat cutoff.
Stretching the bottom of the bottom flange is easy, but I can't figure out how to stretch the inner lines? They would have to be moved a proportion of the distance which will vary between beam sizes/flange thicknesses, so putting in a fixed multiplication factor won't work. The mathematics to set a multiplication factor based on other elements of the dynamic block is easy, but is it possible to have such implemented on a varying basis?
Elevation showing what I want to do, and the block itself attached.
AutoCad :: Increasing Numbers Depend On Amount And Mile Stone (or Km)
Jan 14, 2012I have a pline include some radius, and it has so many perpendicular line on it, so you can see it in attachment.
What i want to do is, write numbers for each perpendicular line 1,2,3..etc,
and write distance for each line (for each mile stone).
AutoCad :: Excel File With Large Amount Of Technical Data
Oct 12, 2012I'm currently working on building up a library of 3D models of crane rigging for a new job. Specifically, I'm creating wire rope slings (like this 3/8" wire rope sling) but with less of an emphasis on visual detail and more on precise measurements.
In order to simplify the process a bit, I created an excel file to enter the basic four measurements of a sling (length, rope thickness, eye width, and eye length) which then calculates and displays for me the coordinates and measurements of all the objects needed to make the sling (arcs, lines, circles to sweep along those lines, etc.)
I realize now that I'm really just creating a task of endless copy/paste, and I'm looking for a better way to get through the process. How to make this work as efficiently as possible.
Is there some way that I could point AutoCAD to the Excel file and have it read all the coordinates and measurements to draw everything automatically? I also considered creating a line in Excel that would give output that I could copy and paste into a .scr, but I have never used any scripting in CAD before, so it would be new territory for me.
AutoCAD 2010 :: Insert Large Amount Of Coordinates As Block In DWG
Aug 21, 2012I have an excel spreadsheet with a lot of coordinates. I know how to insert a large amount of coordinates as an block in my dwg. But what I want is to connect my Excel to my dwg, so if I change my Excel automatically the blocks in my dwg change.
View 3 Replies View RelatedAutoCAD 2010 :: Crop A Window Area In Model Space To Minimize The Amount Of Objects
Nov 29, 2012I thought there is command that will crop a window area in model space to minimize the amount of objects.
View 4 Replies View RelatedPhotoshop :: How To Reduce Amount Of Colors To 400
Aug 26, 2013I know methods of reducing number of colors to 255 or 3. However I would like to experiment with values above 255. Is there any method of doing so by exact number ? Or at least by visually checking when using sliders?
View 1 Replies View RelatedPhotoshop :: How To Get Multiple GIF With Different Amount Of Frames
Feb 1, 2013Been combing over the interent to try to figure out how to (in CS6 PS) get multiple gif to load onto the same static image that have different amount of frames, thus far I have my two gifs (on opposite sides) on the image and a short title video in the center but it starts with all three images and then runs the two gif until the the first (8 frames) runs out then the remainder of the second runs out at 13 frames and lastly the rest of the video plays each frame.
My goal is to get the video to just play naturally in the center and each gif on the sides to play on a loop as I want the entire image to be a banner for a website.
Win7 64 bit
CS6 photoshop
Gif1 = 8 frames/layers
Gif2 = 13 frames/layers
video = 96 frames/layers (also it is set at a very low resolution and is just a title with a second title transitioning in)
Photoshop :: Histogram / Pixel Amount In CS4
Mar 22, 2012I am using the histogram function in PS CS4 for Windows. I am using the magic wand tool to choose numerous "green" elements (for example). As I choose more and more elements, the pixel amount goes up in the histogram table. For some weird reason, when I choose enough elements to hit around 50000 pixels, the amount reverts to 12000 and goes to "cache level 2". I need to be able to have a total of all my elements for the project I'm working on. Is this a memory issue? How can I increase the cache?
View 1 Replies View RelatedPhotoshop :: Amount Of Pixels In An Inch
Nov 9, 2004while i was outside my dad opened a jpg.. and the inches seemed LARGER ..
so i zoomed in the same %.. and it wasnt pixelated.. there were More pixels in the inch.. so i pasted something from my previous work.. and Indeed. it was SMALLER.. so i had to redo the whole thing.. it was bigger work.. but the print was very improved.. my question is.. how can you control how many pixels are in an inch.. if you can at all.. and if you cant how do you explain
what happened..
Photoshop :: Large Amount Of Images.
Jan 3, 2007is there a fast way to resize a large amount of images?
View 2 Replies View RelatedPhotoshop :: CS3 Maimum Amount Of Downloads
Oct 27, 2008I bought Photoshop CS3 and have a photography studio. I have 4 computers to do my editing on and when I tried to dowload the program to the last computer it says that I have reached my maximum amount of downloads or something like that. It won't let me register it and it tells me that I have to de-activate one of them to register the last computer. Am I going ot have to go out and actually purchase yet another copy of PS CS3 to have it on that other computer? Is there a discounted price or do I actually have to pay full price to add it to one more computer?
View 6 Replies View RelatedPaint.NET :: Change The Amount Of Pixels?
Jan 21, 2013I need to make a texture for google SketchUp that can be imported into RCT3. But the amount of pixels need to ve a square. Eg 256 x 256. How do I do this?
View 1 Replies View RelatedPaint.NET :: Any Way To Shift Pixels By A Specified Amount?
Dec 19, 2011Often, especially when I'm working with screenshots, I'd like to be able to set the canvas size, and then paste in a larger image and move it to a specific point. This would allow me to automatically cut out the Windows portion of the screenshot, menu bars, scroll bars, whatever, while still keeping the actually interesting pixels in the same place from screenshot to screenshot.
In the past, what I've done is essentially to create a selection mask:
Prep:
Paste the image into the backgroundCreate a 2nd layerSelect over the interesting pixels on the image in the 2nd layerInvert the selection in the 2nd layer and fill it with a solid colorRepeat:
Make a magic wand selection of the un-colored pixels in the 2nd layerSwitch to the background and copy the selection to the clipboardWork with the copied pixels (in another Paint.Net window, or another program)
Paste the next image into the backgroundSwitch to the 2nd layerBecause of the manner in which Paint.Net handles the canvas, this workflow would be greatly simplified if I could programmatically move pixels:
Prep:
Select the interesting pixels in the first imageCrop to SelectionRepeat:
Work with the pixels remaining on the canvasPaste the next image (select "Keep Canvas Size")Shift Pixels so that the interesting portion of the image is on the canvasI looked through the entire menu structure in 3.5.10 several times, and didn't see anything that would obviously produce this transformation. I'm aware of the Ctrl+<arrow> method for moving by 10px, which is certainly better than just using the arrow keys. And I've seen references to the Panelling effect plugin which performs a similar function, but (without having tried it) I expect it would not produce the desired effect if I wanted to create negative/empty space on one or two sides of the shifted pixels, or if one of my images was smaller than the total desired area.
Is this already available in Paint.Net, and I just missed it? Or is there a plugin that accomplishes this specific transformation without additional side effects?
Photoshop :: Import Then Move X Amount Of Pixels
Dec 16, 2012I am needing to deliver to a software company one VERY long PNG that contains different animated states or steps of a volume knob for a user interface.
I have 127 animated steps/states in 127 PNG files. SO what I need to do is to discover an action or automated way that I can import each file in, then move it +X amount of pixels.
Specifically it's a 40px by 40px volume knob and there needs to be a 1px space in between each state. SO... basically... that means my end result document would be a 5,207px width document (40 times 127 plus 127).
Does this make sense?
My goal is to find the most efficient way of doing this. I was able to create the many different file states from After Effects.
Xara :: Objects Only Moving Set Amount Of Pixels?
Mar 16, 2012Somehow I must have activated an option to only be able to move any object a certain distance at a time. For example, I have a circle that I want in a certain position but I can not move it there with my mouse. Instead it insists on moving 18,9 pixels in any given direction whenever I'm moving it with my mouse. To get a specific position I have to enter its position manually.
View 4 Replies View RelatedRevit :: Change Amount Of Characters Available In Room Tag
Aug 30, 2012How do I change the amount of characters available in a Room Tag for the Room Name? What is the limit and can it be increased?
View 1 Replies View Related3ds Max :: Suddenly Stops Rendering After Certain Amount Of Frames?
Sep 26, 2012So I recently created a 350 frames long animation, which I then tried to render out as an .avi using the mental ray renderer.
I have it set up in the render setup to render from frame 0 - 350, I have also chosen the output format.
Everything seems to work fine and dandy, the frames are rendered out nicely but then all of a sudden after about 40-50 frames it just stops rendering. The little window containing the progress bar just seems to disappear and in the render preview window is a half rendered image.
I have tried redoing this 3 times, but every time it just stops rendering at about the same place. The first time it stopped at frame 43, the second time at frame 47 and the third time somewhere inbetween.