I have a pline include some radius, and it has so many perpendicular line on it, so you can see it in attachment.
What i want to do is, write numbers for each perpendicular line 1,2,3..etc,
and write distance for each line (for each mile stone).
What was the command to increase the amount of viewports that were active in one paper space tab?
Currently hit the default limit.
I have draws with a a lot of layouts.In each layout, there is a block (CARTOUCHE) with a an attribute (PAGENUMBER)
I am looking for a way to select the block in my first layout, indicates a number for my attribute (PAGENUMBER). The lisp will automatically increase the attributes of the next others layout. How can I start this lisp.
I need to open about 500 files and write 1 on the first, 2 on the second, and so on. I'm going to do a batch edit. How would I say to the action "Write this number with this font/size/etc and then in the next file, add one to it."?
View 9 Replies View Relatedthere a way to make a Number Climb or count up like in this After Effects tutorial?It's a type of thing that's really useful for infographics.
View 1 Replies View RelatedHow can I bind the rasterImage as part of dwg file not depend on the ori file outside?
I use the imageattach order, However when i delete the ori image or send the dwg file to others the image is wrong.
Working on gas transmission classification using the "sliding mile" for the building count? If so what procedure are you using. At this point I have run the 660' buffer around the lines added the address/structure point queried to within the buffer polygon then select all the points along a mile of point to get a count.
View 2 Replies View RelatedI have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedI wanna use to shapee tool or whatever- ractangle tool- Generally said I need to create some shape. But at photoshop is everything snap my new shape to pixels. Like in the backroground is some invisible pixel grids and everything is snaping to whole pixels. I dont want this. I Want to use whole space without automatic pixels adapting to my shapes. I want to be independent in creating my shapes without snaping to pixels grid.
And also want to ask you. If you would like create new guide lines it is non dependable on pixel grid. But after it when I want to snap my nex objects to it- it not possible. And when I tick in preferences/ general: ,,snap vector tool to pixel grid" everything become dependable to pixels and everything is snapping to pixels. I don t wanna this…
If I do a print screen and paste, for instance, a website into Photoshop, the colors are off by a MILE. Everything appears all washed out, it's really awful.
I have PS CS at work, and am not having this problem. I uninstalled and reinstalled photoshop, and so far, none of the changes I've made in edit > color settings
I need to design a walking track 1 mile (5280 feet) from a starting point and finishing at the same point. I need to go around buildings, ponds, etc. What is the best way to tackle this? I thought about 16 splines at 330', but as soon as the spline is moved the distance changes.
View 2 Replies View RelatedI hereby have a school note report from my little brother. He told me he had some bad notes in his last period and I would like to make a fake copy of it.
Basically, I scanned his 3th period notes and I would like to change some and add some
How you can remove numbers and add new ones over it and add numbers with the same digital code used on the old ones to put those in empty notes
I'm having a problem here with hatching in AutoCAD 2000. The existing hatch patterns doesn't fulfill my needs and I need something more specific to hatch a cobble stone area. In my aCAD hatch patterns there's not a good hatch for it and I looked that I can do my own pattern using Notepad etc. but unfortunately I don't have a time to do that.
So, my question is: Is there any simple ways to create your own hatch patterns for example like in Microstation where it is very easy to do. There is an option that I can use cells (blocks in ACAD) as hatch patterns.
Or can I maybe download a custom *.pat file from somewhere and use it?
making un-plastered stone wall but in 3dstudio. Could something like this be made in autocad?
View 7 Replies View RelatedI'm trying to import a stone hatch pattern from the Internet but every time I try to import it into my hatch gallery it says error in pattern file. would like a couple different hatch patterns to show my customers rather than just brick.
View 9 Replies View RelatedIm doing a 3D design of kerb stone which includes a pedestrian ramp.
Please refer to my picture.
The kerb stone I have issues with is the one I have provided dimensions for. From the right edge, the height of the stone is 225mm, then is slopes down to 110mm. But what I could acchive is that the right 100mm I have shown is meant to be 75mm which the back stays at 110mm. Is there a way I can achieve this?
Is there a maximum amount of tabs you can have?
View 9 Replies View RelatedI got a picture of Mount Rushmore and I got 4 peoples faces.
Im trying to figure out the best way to make it look like those guys faces are on Mount Rushmore if I can.
I've added a stone material to my wall surface but when I hit render the edge looks very sharp. My question is how do I get the edge to look more rounded and give a more realistic look to the edge. I've attached my rendered image and below an image of what I would like it to be.
View 3 Replies View RelatedI have written some code that draws a graph. The graph starts at the 0,0 default of AutoCad Model Space and goes +X and +/-Y. I want to redraw the labels along the X axis every time the Zoom is changed by the user, to change the text height and density of the labels. I need to know the the current Zoom in relation to the actual extents of the graph. Ideally I would like to redraw the text as a result of the "zoom event" I don't know if there is such a thing or not.
View 1 Replies View RelatedHow do I increase the size of blocks I get online?
View 2 Replies View Relatedarch.jpg
I would like to know if it's possible to create an offset curve from another curve, but with an increasing distance, the result i want to achieve is shown in the picture. (the magenta line).
where I can find a good green marble stone tutorial?
View 3 Replies View RelatedI'm designing a poster for a play and loved the stuff I saw in the stone wall forum and I'd like to do something like an ancient engraved stone (egyptian era ) You know, chiseled into the stone. I'll post what I have but I need some advice. Is there a way to get the engraving to show up better? I used the emboss mask but I'm just not satisfied. Any ideas?
View 2 Replies View RelatedJust trying to figure out the best way in animation a block of stone being chiseled away. So the stone would be chipping away piece by piece, one after another. Is there a way to treat a polymesh so that peices can break off of it in a controlled manner? I have tried pro-boolean but it is not to effective for multiple pieces.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
Using Autocad_2k10 and ScriptPro
Trying to write a srcipt to copy/paste a certain amount of text in these coordinates (ie.: 1.8520, 13.1085, 0.0000) in 100+ drawings to a file (ie.: 123.txt or 123.xls)
I'm stuck on the "paste to file", is this possible?
I'm using ScriptPro cause of the batch process.
How can I expand a border by the same amount in all directions? I have this: drawing and I want to expand the green border by 275 microns. Scaling from a base point doesn't work for what I want because then the new border is not the same distance from the old one all the way around.
View 4 Replies View Relatedi downloaded a DWG from the subzero refrigerator website and i saved as a dxf and tried importing into cabinetvision and it says there is 21000 faces and takes a while to load and slow my computer down, is there anyway to reduce the number of faces?
View 1 Replies View RelatedI am running AutoCAD Mechanical 2010, and am curious if there is a way to decrease all the hole sizes on a given part by a set number, say .015.
I work for a sheet metal fab shop, we cut our parts with a waterjet and this requires us to undersize all the holes on the flat patterns by about .015 so they can be drilled out afterwards leaving a nicer edge finish in the holes. Some parts have hundreds of holes with multiple sizes and it can be very time consuming to undersize all the holes. My current method is to undersize one hole and then use the equal constraint to set the rest of the holes of that size to that same size.