I've added a stone material to my wall surface but when I hit render the edge looks very sharp. My question is how do I get the edge to look more rounded and give a more realistic look to the edge. I've attached my rendered image and below an image of what I would like it to be.
View 3 RepliesI would like to create an effect wherby this .gif image of the gate swings inward.
[URL]
Ive tried (admittedly) not that hard at doing it with the skew options within Edge Animate but I cannot get it to swing realisticly.
Was wondering if there are some ways in converting a highly realistic rendering of an object generated in a 3D program into a more illustrative, simplified, alittle less realistic version in Photoshop?
The object has plenty of silver reflections, HDRI environment map reflections, precise shadows and highlights, etc. I just want to make it look more generic and not as polished I guess.
Are there filters or plugins that will do this in a plug in play method or is it more prodedural and manual?
I got a picture of Mount Rushmore and I got 4 peoples faces.
Im trying to figure out the best way to make it look like those guys faces are on Mount Rushmore if I can.
where I can find a good green marble stone tutorial?
View 3 Replies View RelatedI'm designing a poster for a play and loved the stuff I saw in the stone wall forum and I'd like to do something like an ancient engraved stone (egyptian era ) You know, chiseled into the stone. I'll post what I have but I need some advice. Is there a way to get the engraving to show up better? I used the emboss mask but I'm just not satisfied. Any ideas?
View 2 Replies View RelatedJust trying to figure out the best way in animation a block of stone being chiseled away. So the stone would be chipping away piece by piece, one after another. Is there a way to treat a polymesh so that peices can break off of it in a controlled manner? I have tried pro-boolean but it is not to effective for multiple pieces.
Win7 Pro 64bit
I7 3680 6 core 12MB cache w Corsair H80 liquid cooling
ASUS P9X79
32 GB DDR3
NVidia Quadro 5000
3TB WD
I'm creating a level for a 3D game, and I'd like to use self-made textures for that one. A part of the level is supposed to take place on the outsides of an old castle. So I need a stone floor that looks old, a little dirty and bumpy.
I've folowed a few tutorials, and I made pretty nice things, but I can't seem to make the stones look more realistic. If you take this example (not created by me)
You'll see that the stones have very subtle cracks and scratches, and that it looks dirty (notice the greenish moss growing on it, darker patches here and there, etc)
I want stones that have similar effects. Can anyone tell me how to make that greenish moss effect and how to make outside stone floors look dirtier and older in general?
I'm having a problem here with hatching in AutoCAD 2000. The existing hatch patterns doesn't fulfill my needs and I need something more specific to hatch a cobble stone area. In my aCAD hatch patterns there's not a good hatch for it and I looked that I can do my own pattern using Notepad etc. but unfortunately I don't have a time to do that.
So, my question is: Is there any simple ways to create your own hatch patterns for example like in Microstation where it is very easy to do. There is an option that I can use cells (blocks in ACAD) as hatch patterns.
Or can I maybe download a custom *.pat file from somewhere and use it?
Setting the height of the masonry stone,
I couldn’t figure out how the height of the masonry stone can be set.
For example, in the attached screenshot, I wanted the height to be 0.26 meter then how this can be done?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
making un-plastered stone wall but in 3dstudio. Could something like this be made in autocad?
View 7 Replies View RelatedI'm trying to import a stone hatch pattern from the Internet but every time I try to import it into my hatch gallery it says error in pattern file. would like a couple different hatch patterns to show my customers rather than just brick.
View 9 Replies View RelatedI'm a fashion designer and i've just learned using photoshop and illustrator.so my real problems are creating textures. i'm designing a T-shirt with fadeout or stone washed looks,
View 9 Replies View RelatedI was waiting for a long time to get back to smoke since I left that FFI platform few years ago. Installed a demo to check the stability of the program on OSX. Have a problem with Stone+Wire. Smoke wont start - i get an error that he cant connect to stone. Checked Service Monitor - Stone+Wire is blinking red and green, the same as wiretap server. When I press restart, it goes green for a few seconds then goes back to red again.
My rig : 2 x 2.66 6-Core Xenon 17GB Ram os 10.6.8 and I'm setting up media storage to external G-Speed raid-5 that is connected by ESATA.
here are long files
sw_served
# Discreet sw_serverd log file - 1.0
# Started - (CET) Tue Mar 26 13:13:37 2013
# Hostname - Gonzo.local
376479744 CoThreadPthread.C:200 03/26/13:13:13:37.447 Registered thread 'Logger'
398798848 CoThreadPthread.C:200 03/26/13:13:13:37.490 Registered thread 'S+W Gateway connection timer monitor'
[Code] .....
I can't get clips to render to the stone in the background. I am running 2012 SP2. I looked and the Backburner version is 2013.
How do I get rid of this? I have run the uninstaller, but that is less than a complete un-install it seems.
Im doing a 3D design of kerb stone which includes a pedestrian ramp.
Please refer to my picture.
The kerb stone I have issues with is the one I have provided dimensions for. From the right edge, the height of the stone is 225mm, then is slopes down to 110mm. But what I could acchive is that the right 100mm I have shown is meant to be 75mm which the back stays at 110mm. Is there a way I can achieve this?
I drew a stone wall with the free hand tool and used a 1.0 line width, but since the ends of the lines are square I have jagged edges in places. I tried using the eraser but as soon as I let go of the mouse button what I erased pops back. I was thinking about converting to a bit map and smooth it out that way, but I need it as a vector file. So after I convert it and clean it up can I convert it back?
View 11 Replies View RelatedI was wondering if there's a way, in Xara, to make a drawing look like it's been carved or etched into a stone surface. I've been messing around, trying to discover this for myself, but no luck so far.
View 9 Replies View RelatedI made it through a project with a few Smoke crashes, mostly on a particular clip. Then when I go back to make revisions a day later I get this message:
Error: VOLUMEMGT: Failed to initialize Stone+Wire connection.
Everything was working fine up to that point besides the few Smoke crashes that recovered with no problem.I am really in a bind now and need to finish this project urgently.sw_logs_2.txt
I have successfully finished 2 projects in Pre2, but today, Smoke started to crash when I forced it to save.
Stone&Wire is red, and won’t restart.
After typing
cat /usr/discreet/sw/log/sw_dbd.log
into terminal I got this:
unknownd830624e3a74:~ Tomi$ cat /usr/discreet/sw/log/sw_dbd.log
# Discreet sw_dbd log file - 1.0
# Started - (CET) Mon Aug 6 01:18:10 2012
# Hostname - unknownd830624e3a74
5246976 CoThreadPthread.C:200 08/06/12:01:18:10.310 Registered thread ‘Logger’
[Code] .....
I have rebooted several times, but no luck. I’m not a programmer, but as far as I understand, the problem is on a framestore. Funny thing is, the last saved version is still available in Smoke, everything is in place, and it plays normally, just when it comes to saving or exporting, it crashes, or refuses to export.
I have a pline include some radius, and it has so many perpendicular line on it, so you can see it in attachment.
What i want to do is, write numbers for each perpendicular line 1,2,3..etc,
and write distance for each line (for each mile stone).
I get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
I read studios2010 problem and it sounds like I have something similar.
I get to the startup screen and get "Failed to Initialize Stone & Wire. Press Escape."
I have a student license and I might have a corrupted .db file. Just don't know where .db files are on my computer.
How best to make the stone facets go sideways into the main tower. As you can see though it doesn't make a whole lot of sense. How I could achieve such results?
View 1 Replies View Relatedhow or direct to a tut of how to change a stone statue to a chrome statue?
View 3 Replies View RelatedI'm having trouble getting the edges of my eyes to look like they are part of the chair, which got me wondering. Is there a way to feather my edges with increased intensity closer to the edge? To be specific, I'd like to start the feather 100px inside the border with 60% opacity, all the way to the edge (border) with 0% opacity. I tried doing this manually a couple of ways and it just didn't look uniform.
I have also tried with the eyes seperated (without the middle area), but I still have the same issues.
I have an existing HTML page (created in Adobe Muse) and I am trying to draw some Adobe Edge objects on top of the page (e.g. a rectangle or an image). When I look in the layers panel, the Edge objects show as top in the list. However, visually when I look at the page, the elements show behind the pre-existing HTML page from Muse.
View 3 Replies View RelatedWhen I go to crop or move an image close to the edge of the canvas it jumps to the edge. I am having trouble especially with cropping the space between the image and the edge of the canvas the way I want it. turning off this jumping to edge problem I'm having?
Also, I've used CS4 a fair bit and haven't come across this same problem but in PE when I'm editing things like adjusting text on a layer and I'm changing options with hotkeys to resize the text box for eg, Elements seems to jump to the background layer quite alot and then I have to click back on the layer I want to edit between changing tools. Is it something to do with the Esc key?
Using Autocad 2000LT and trying to locate as many 1.5" diameter circles as I can within a 21" diameter circle keeping all the circle .500" apart from any other circle and .500" away from the outer edge. Am using the array function. Trying to bring the first circle up to the line thats .500" in from the 21" outside diameter.
First when I zoom the 1.5" circle looks like a series of lines, not a smooth round circle. First how do I smooth out the appearance of the circle. Second, what commands do I use to move the edge of the circle to just tough the line so that when I measure from the outside dia to the far edge of the small circle I get 2".
In version 5.2 for Mac i'm seeing Export -> Long Edge / Short Edge giving the wrong result... they seem to be inversed... I.e. defining a long edge seems to result in an exported image with that length as the short edge.
View 1 Replies View RelatedThe Elements window in Edge Animate seems to be unstable. When I right-click in the field to modify an asset, Edge often crashes with the resulting error message:
Edge Animate - Exception An error occurred. Please save your work and restart Edge Animate.
It happens quite frequently (~7/10 right-clicks)