AutoCAD Civil 3D :: View Frames With Multiple Alignments
Jun 19, 2013
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
View 2 Replies
ADVERTISEMENT
May 3, 2013
When creating plan and profile sheets with multiple alignments in the view, what is a common practice in civil 3d?
- Data shortcut all alignments that are in the view into the plan and profile model
- Create a dwg that has all the alignments data shortcutted and xref that into the plan and profile dwg
- Create a dwg for each alignment and xref into an overall alignment dwg via attach and then xref the overall into the pp sheets dwg model.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 2 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Mar 1, 2012
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
View 4 Replies
View Related
May 18, 2012
I need to figure out a way to sample multiple surfaces for multiple alignments.
Example 1: I am creating cross sections for a river dredge showing the pre-dredge bathymetry, design dredge elevation, and post-dredge bathymetry results. I have 100's of alignments that I need to sample 3 surfaces and display in profile view. Due to the clients requirements for display, using the cross section tools don't work for me, so I have resorted to using a seperate alignment for each cross section.
Example 2: Working in a subdivision with many utility alignments it would save quite a bit of time to be able to choose a group of alignments and sample multiple surfaces in just a few clicks.
View 3 Replies
View Related
Feb 28, 2013
I am using Civil 3d 2012. What I have is a surface along railroad tracks. Each set of tracks has a different alignment because they aren't parallel. I have a baseline alignment with my stationing set on that. What I want to do is have one profile view showing the multiple track alignments based on the baseline alignment. I can't use the offset alignment because they aren't parallel.
View 1 Replies
View Related
Jul 24, 2012
2012 SP2
I'm having a problem with profile shortcuts showing up under multiple alignments. I have 16-alignments and profiles in their own drawings. I didn't create the shortcuts right away as I was still figuring out how I wanted the project dir structure. When I had that solved, I started creating the shortcuts. When I checked them, some of the alignments had up to 6-profiles from other alignments listed under them. One alignment had 3-profiles, and not one of them was for the alignment.
I removed all the profile shortcuts and started bringing them in again. Same problem. This was after shutting C3D down, cleaning up the tmp files and restarting.
There are shortcuts for 36 other alignments, and none of them appear to be affected, only these last 16. Validate Data Shorcuts doesn't do anything.
View 1 Replies
View Related
Jun 5, 2013
How do i export multiple alignments from civil 3D 2013 to hecras?
View 2 Replies
View Related
Oct 22, 2013
Is it possible to change the Alignment Labels Major Stations Increment for multiple Alignments ?I have 50+ Alignments. Each of them labelled with 100m increment for major stations.I would like to change them to 50m interval.
View 2 Replies
View Related
Aug 26, 2013
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies
View Related
Jun 23, 2012
How to show the deflection anglesof alignments. I want to show those angles in band set or profile view.
AutoCAD Civil 3D 2012 SP 2
View 9 Replies
View Related
Mar 29, 2012
I have a dwg I need the viewframes to be 20 scale
Right now I just testing using the default templates, So I'm guessing it has to do with the templates I'm choosing.
C3D 2010
View 1 Replies
View Related
Sep 12, 2012
I want to create 15 instead of 17 viewframes for a portion of the alignment. i played with the dwt file's plan viewport. doesn't matter how big i make the viewport it always create 17 pages. the bigger i make it the more overlap it has.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 1 Replies
View Related
Dec 17, 2013
I am using AutoCAD Civil 3d 2012. I have succesfully created a View Frame Group (VFG) from an alignment and then created Plan Profile sheets from that View Frame group. I did create the sheets in a separate file from the View Frame group (that is an option when you create the sheets). It appears that if I change a View Frame using the grips, the corresponding sheet viewport doesn't change based on the edits to the view frame. I must manually update the sheet plan viewport to align with the edited location of the view frame. Is there a way AutoCAD will do this automatically or does it just not do that? Do I have to create the whole sheet set again or can I just recreate that one sheet? I don't want to do that since create the sheet will create a new profile view.
View 2 Replies
View Related
Nov 26, 2013
is possible to create view frames with an alignment? my drawing is not linear, in fact, its a survey of large lake with bathy survey data, and topo data along the shoreline. is there a function to tell c3d to divide my model into as many sheets required to cover the surface based on the template/layout properties?
View 2 Replies
View Related
Apr 4, 2013
Any way to adjust the placement of my cross sections after i created my view frames? As you can see from the image attached i have extra room on the bottom of my sheet and my first cross section is not completely on the page. Some of my view frames are correct and others are not. Can this be adjusted per sheet?
View 1 Replies
View Related
Aug 8, 2012
there i wanted to know a method to control my view frames range or how to do so in the sheets ,
as per attachment i get the Profile view , out of frame
Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 3 Replies
View Related
Jun 19, 2013
I have a road design with a corridor. I want to plot the plan and profile but not show the sub-assembly section that are every 25 feet. I can't freeze the layer because then I only see my baseline for the alignment. I want to see the offsets of the road. I have tried creating an offset of my alignment but it will not create the offsets for some reason.
I want my final output to show the entire road over my OG topo survey but do not want to see section lines every 25ft
View 1 Replies
View Related
May 14, 2013
I has a project where my Custom UCS don't is the Autocad's Original, but when I make Multiple Sections Views, the C3D does it in Autocad's Original UCS. How I make this on my Custom UCS?
Intel(R) Core(TM) i3-2120 CPU @ 3.30GHz
4,00Gb RAM
Windows 7 - 64bits
View 9 Replies
View Related
Jun 26, 2012
I have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
View 1 Replies
View Related
Apr 20, 2011
Is there a way to label multiple structures/pipes at one time in profile view? We have tried selecting all at one time, right click and add label, but it only labels one of the structures/pipes.
View 4 Replies
View Related
Aug 28, 2012
I created a simple roundabout in Civil3D with the intent on visualizing the corridor in 3DS Max Design using the Civil View plugin. The corridor rendered complete in Civil 3D, but there are large corridor gaps in Civil View. They all appear to be at the location of corridor baseline boundaries. Obviously this is a non-starter, as 3DS Max is supposed to improve the visual quality, not reduce.
Attached are some sample images of the roundabout in Civil3D and in 3DS Max Design.
I am using Civil 3D 2012 and 3DS Max Design 2012.
View 3 Replies
View Related
Feb 21, 2012
How can I create a dwt file for the production of multiple section views sheets in A3 format and 1/200 ?
Civil 3D Section .dwt (Template/plan production) has only layouts for A0 and A1 plan and scales 1/500 - 1/1000 and 1/5000. I tried to change the format to A3 and scale to 1/200 of one of those layouts in the set up manager but didn't get a good result while producing section sheets.
View 2 Replies
View Related
Mar 4, 2013
Is there any reason to have aligments in a site instead of jsut under the general alignments?
View 3 Replies
View Related
Jun 8, 2012
How do I project the Proposed Road Level information from Road_1 at the intersection of Road_2 (Alignment_GA.jpg) onto the Start of the Profile for Road_2 (Alignment_Profile.jpg) to give me my tie in start point?
How do I obtain the exact change of the intersection Point? How can i extend Road_2 onto the horizontal curve of Road_1 so i know they exactly intersect?
View 1 Replies
View Related
Feb 12, 2013
I have a more than 10 number of alignments of road network in MX Road. I imported these alignments into Civil 3D. The problem is I am not able to edit these alignments.
View 4 Replies
View Related
Feb 25, 2013
I have more than 100 alignments of a road network in Civil 3d. I want to assign separate layer for each alignment. Is there any easy way to do this?
I changed the layers for a few alignments and exported them to Autocad 2007 format, but the centrelines were in single layer only.
CIVIL 3d 2011
DELL PRECISION T3500
View 9 Replies
View Related
Oct 31, 2013
I have two alignments that are not parallel that make up one corridor. Each alignment has a separate profile running along it. At stations where I have a template drop in my section editor, it is not representing what is really happening because it just is perpendicular to one alignment. Is there a way to develop a secondary alignment that will have my section editor show what will be parallel to both alignments.
View 1 Replies
View Related
Oct 11, 2013
How to join 2 alignments which are continuing a same road? Is it even possible ?
I have tried to explode them into polylines > join the polylines and then reconstruct the alignment again but it crashes on everything longer than 15 miles
View 5 Replies
View Related
Aug 10, 2012
I'm trying to create two offset alignments (one on each side of my centerline alignment). For some reason I can only create an offset alignment on the left side of my CL alignment, but not the right side.
View 7 Replies
View Related
Feb 20, 2013
I would like show all alignments in a combobox. I want do a application in C#.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
View 8 Replies
View Related
