AutoCAD Civil 3D :: View Frames And Not Wanting To Plot Corridor Info
Jun 19, 2013
I have a road design with a corridor. I want to plot the plan and profile but not show the sub-assembly section that are every 25 feet. I can't freeze the layer because then I only see my baseline for the alignment. I want to see the offsets of the road. I have tried creating an offset of my alignment but it will not create the offsets for some reason.
I want my final output to show the entire road over my OG topo survey but do not want to see section lines every 25ft
View 1 Replies
ADVERTISEMENT
Aug 26, 2013
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies
View Related
Oct 6, 2013
I have changed my color for my corridor in both the layer table and in the properties of the corridor but it still seems to be the same. I have seemed to be able to change some of the attributes but others remain the same. Same problem for the profile.
View 1 Replies
View Related
Jan 7, 2014
I have several SHP Connections that I am using as background. I can use the Style Editor to get the individual SHP Lines/Polygons/blocks to be the appropriate colors for the information that they include (Property Lines, Buildings, Utilities, etc)
The problem is in plotting this information. The settings in my tried and true .ctb file don't seem to apply to the SHP data. Everything else that actually exists in the drawing behaves correctly, but the SHP data plots as it appears on the screen.
I am using C3D 2012
View 2 Replies
View Related
Mar 29, 2012
I have a dwg I need the viewframes to be 20 scale
Right now I just testing using the default templates, So I'm guessing it has to do with the templates I'm choosing.
C3D 2010
View 1 Replies
View Related
Sep 12, 2012
I want to create 15 instead of 17 viewframes for a portion of the alignment. i played with the dwt file's plan viewport. doesn't matter how big i make the viewport it always create 17 pages. the bigger i make it the more overlap it has.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 1 Replies
View Related
Dec 7, 2012
Using 2012, latest SP. I have a master drawing @ 1:500 with alignment, prof's, corr, etc. I have a second drawing @ 1:200 to be used for section views. I've data referenced the alignment, prof's, srf's, etc. I've created the section views in the section view dwg and xref'd the master dwg.
My problem is that the corridor model will not display in section views anywhere along a spiral in the 1:200 dwg. It displays fine everywhere else along the alignment. Just not spirals.
I have section views in the master drawing that will display the corridor just fine in section view at these same stations along the spirals.
View 9 Replies
View Related
Dec 17, 2013
I am using AutoCAD Civil 3d 2012. I have succesfully created a View Frame Group (VFG) from an alignment and then created Plan Profile sheets from that View Frame group. I did create the sheets in a separate file from the View Frame group (that is an option when you create the sheets). It appears that if I change a View Frame using the grips, the corresponding sheet viewport doesn't change based on the edits to the view frame. I must manually update the sheet plan viewport to align with the edited location of the view frame. Is there a way AutoCAD will do this automatically or does it just not do that? Do I have to create the whole sheet set again or can I just recreate that one sheet? I don't want to do that since create the sheet will create a new profile view.
View 2 Replies
View Related
Jun 19, 2013
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
View 2 Replies
View Related
Nov 26, 2013
is possible to create view frames with an alignment? my drawing is not linear, in fact, its a survey of large lake with bathy survey data, and topo data along the shoreline. is there a function to tell c3d to divide my model into as many sheets required to cover the surface based on the template/layout properties?
View 2 Replies
View Related
Jan 18, 2009
Is there a way to label corridor links in plan view ?. I would like to show my pavement cross slopes from corridor in plan view.
View 5 Replies
View Related
May 25, 2012
How do I access the Corridor Section Editor view settings and copy them from one drawing to another?
View 1 Replies
View Related
Apr 30, 2012
I changed my Corridor Prop : From "Specific Code" : Top to Datum as shown below
and afterwards my section view Don't have the corridor in it !!
I tried to creat a new one but in the Section Creation tool i could not find surfaces :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 3 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Aug 31, 2012
Edited a corridor section. Hit some button (not sure what) now I can't get back to my regular view. If I select the "Top" view, now all that shows up is one contour, and the top of one cross section, like it's only showing stuff that is at one elevation.
View 1 Replies
View Related
Dec 31, 2013
I'm not too familiar with corridor styles. How can get points to show on my cooridor in plan view?
View 4 Replies
View Related
Oct 18, 2013
I'm using the Ditch subassembly in my corridor and am running into a problem when using realistic mode to view.
I've applied a render material to L3, L2 and L4 which is fine but when I assign a material to L1-L5 (i.e Top) it overdraws (or otherwise fails to display) the previously assigned materials for L2, L3 and L4.
If I set the Links L1-L5 (i.e. Top) to no display then L2, L3 and L4 display as expected but when IMX'd to Infraworks the existing terrain shows through at Links L1 and L5.
Is it possible to stop this from happening and have a seperate material for L1 and L5 whilst retaining L2,L3 & L5 materials?
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
View 2 Replies
View Related
Nov 24, 2012
I have a problem with editing in link code because it didn't appear in corridor section view as you can in attached files.
View 9 Replies
View Related
Apr 4, 2013
Any way to adjust the placement of my cross sections after i created my view frames? As you can see from the image attached i have extra room on the bottom of my sheet and my first cross section is not completely on the page. Some of my view frames are correct and others are not. Can this be adjusted per sheet?
View 1 Replies
View Related
Aug 8, 2012
there i wanted to know a method to control my view frames range or how to do so in the sheets ,
as per attachment i get the Profile view , out of frame
Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 3 Replies
View Related
Mar 1, 2012
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
View 4 Replies
View Related
Aug 31, 2012
I am trying to plot all my cross sections in a drawing, but I whant them in a vertical line. It seems that I can only plot in a horizontal line on sheets.
View 4 Replies
View Related
Sep 14, 2012
I have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies
View Related
Dec 13, 2012
Copy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
View 9 Replies
View Related
Mar 21, 2013
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
View 2 Replies
View Related
Dec 30, 2004
We use an in-house plotstamp (not the acad plotstamp) which uses rtext to show the file path and name. It works fine under all circumstances EXCEPT when we plot using the Publish command. The output from Publish shows the file path as the C:Documents and Settings... where the acad2005 software is installed instead of the correct network drive path where the dwg files are located.
Is there a secret setting somewhere that will keep Publish from changing the rtext? If we switch from rtext to fields, would that eliminate the problem?
View 2 Replies
View Related
May 1, 2013
I have set my wipeout frames to "off" however when I plot the drawing they are still visisble.
This sets the visiblity of the farmes within the drawing to off however when plotting the frames are visible on the print.
Been a while since I have used wipeout, not sure if this is a system bug or there is some other variable I have forgotten that will set frames to not plot ?
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 2 Replies
View Related
Jan 29, 2006
I have a regular 1024x768 image and I want to grab a piece of it say 780x125 for my Website logo. Well I use the rectangular marquee to get that exact piece, go to Modify -> Smooth edges to 10 pixels so now all four edges are pretty smooth. Problem is I only want the two top edges smoothed out, I want the bottom ones plain with pointy edges, what will I have to do to achieve that?
View 4 Replies
View Related
Nov 29, 2012
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
View 5 Replies
View Related
Jan 11, 2014
I ran RECOVER on a drawing and it told me that three errors were fixed. Is there any way for me to know what the three errors were?
View 2 Replies
View Related
Jun 20, 2012
Is there a way to view color temperature information in a cell in grid and loupe view in Lightroom 3?
View 2 Replies
View Related
