AutoCAD 2013 :: How To View Recovery History With Info About Errors That Were Fixed
Jan 11, 2014I ran RECOVER on a drawing and it told me that three errors were fixed. Is there any way for me to know what the three errors were?
View 2 Replies
ADVERTISEMENT
AutoCAD 2013 :: Recovery Required In 2013 All The Time Even After Audit And Save?
Jan 9, 2014I’ve just worked on a series of clients drawing using AutoCad 2009. They are using AutoCad 2013. out of 20 or so drawings several drawings when opening with 2013 open up with Errors requesting recovery is required due to any number of errors ranging from 3 to 7 on average. The error message asks [yes] to recover and it aborts or [no] to continue and the drawing opens ok without further error. If I recover the drawings, and save-as 2013 or other, the same errors appear regardless. However if I open the same drawings using my version of 2009, I didn’t get any errors. The original drawings were compatible with 2009 without conversion.
View 3 Replies View RelatedPhotoshop Elements :: 10 - How To Get History Tab To Turn On In File Info
Feb 2, 2013I have elements 10 and am using it in windows 7. The manual says that "As you edit your images, Photoshop Elements automatically keeps track of the file's edit history and adds this information to the file's metadata". That's what I want. But when I look in the History tab in the File Info, it's always blank.
How do I get it to turn on and keep track of the edits I've made to the image? (Note -- I'm not talking about the Undo History panel -- that works and shows the edit history. I'm talking about the History tab in "File Info".)
AutoCAD Inventor :: Keep Drawing View Annotations Fixed Relative To Geometry
May 8, 2013I'm sure this has been asked many times but none of the queries I used brought up a similar question. My issue is that I recently spent a lot of time annotating a detail view with leaders attached to geometry, leaders not attached to geometry, and sketches constrained to geometry projected from the view.
I made some modifications to the model which didn't re-locate any of the components that I'd annotated, but somehow the detail view got shifted, and all of my leaders are pointing to the wrong place and the parts of my sketch that weren't constrained to geometry are in the wrong place as well. Some of the leaders seem to have held to their posts better than others, but for the most part my annotations are worthless and will need to be re-done.
AutoCAD 2013 :: Recovery 2007 File
Jan 22, 2013The file are created in AutoCAD 2007.It is a drawing with 2D and 3D drawing in it.When I open this file in my AutoCAD2013 and make the recovery as AutoCAD suggest.
The are no 3D left in the drawing. The file are working fine and whiteout no plebes I AutoCAD2007
System:
Autodesk Product Design Suite Ultimate 2013
AutoCAD Mechanical 2013
AutoCAD 2013 :: Greek Symbol Errors
Apr 18, 2013I have one work station when you insert the greek symbol mew it comes up as M. I tried a few other greek symbols they same to work correctly. I have tried running a repiar, no change. Opening a drawing which has mew in it already makes it display as M
I have tired to insereting it in diffrent fonts same outcome. I can inseret it onther programs like word, thinking it might be some sort of windows or operating system setting.
copying and pasting mew from word to cad works on all other work stations but this one. We are using Civil3d 2013 on windows 7 machines.
What it might be or a work arounds short of making a block for the symbol from lines.
AutoCAD 2013 :: E4de0004h And E4f30004h Errors?
Aug 18, 2013i installed autocad 2014 and when i can open autocad show this errors and close. erros are changing. but always first one shown.. i search the internet but i cant found solution. i deleted all autocad files and install again but not solved..
View 4 Replies View RelatedAutoCAD 2013 :: Errors While Working In Block Editor
May 7, 2012I was trying to edit a dynamic block that made with an earlier version and that had multiple visibility layers and when I would make changes in one visibility layer the change would be in the another layer and poly lines did not have grip points, and insert block would simply disappear. I think there is a serious glitch there.
View 3 Replies View RelatedAutoCAD Civil 3D :: View Frames And Not Wanting To Plot Corridor Info
Jun 19, 2013I have a road design with a corridor. I want to plot the plan and profile but not show the sub-assembly section that are every 25 feet. I can't freeze the layer because then I only see my baseline for the alignment. I want to see the offsets of the road. I have tried creating an offset of my alignment but it will not create the offsets for some reason.
I want my final output to show the entire road over my OG topo survey but do not want to see section lines every 25ft
AutoCAD 2013 :: Errors 1324 / 1603 With 64 Bit Service Pack 2
Jul 23, 2013My AutoCad 2013 is a bit unstable and crashes fairly often. Autodesk is telling me to install the 64 bit service pack. When I try to run it, I get an error code 1324 (illegal character in My Documents) and error code 1603.
View 3 Replies View RelatedAutoCAD 2013 :: Clearing Command Line History?
Oct 19, 2012Is it possible to clear the command line history? Im running a series of commands that output data to the command line, from there I'm copying and pasting off the command line to notepad. Is possible to clear the command line so that I can run these commands again and not get confused by the previous sequence of data?
View 7 Replies View RelatedAutoCAD 2013 :: Command Line History Doesn't Scroll?
Aug 28, 2013Why is it that when I click in the command line history field (when docked) and roll the mouse wheel I can't scroll it up or down? There is no visible scroll bar until the cursor is moved to the other side of the window (a long way on the 30" display), and grabbing this will scroll the command history, yet the wheel wont work.
If the command line is undocked and the disclosure triangle is clicked to display the history, the scroll wheel DOES scroll the list.
AutoCAD 2014 Win 7 x64
AutoCAD 2013 :: Press Pull And Solid History From Menu Bar
Jan 4, 2014Where press pull tools and solid history Menu Bar are?
Not in toolbar and Not Ribbon, from Menu bar.
Photoshop Elements :: How To View History Of Editing In Order To Make Changes
Oct 7, 2013How do I view History of editing in order to make changes in Photoshop 10?
View 1 Replies View RelatedAutoCAD Civil 3D :: MAP Connect To Map Info (using 2013)
Oct 3, 2012We use map info as our native GIS and can use these .TAB files with MAPIMPORT in C3D, but what I would really like to do is use MAPCONNECT like can be done for .SHP files, etc.. I've inquired with [URL].....and they have confirmed that their FME product doesn't support 2013.
View 8 Replies View RelatedPhotoshop :: Fixed Width Function Did Not Work When Draw A Fixed Width Rectangle
Nov 2, 2012The fixed width function did not work when I wanted to draw a fixed width rectangle. Is there a new way to do this in CS6?
View 4 Replies View RelatedAutoCAD 2013 :: Variable To Turn Off Dynamic Grip Info
May 3, 2013my dynmode is set to 0 so this obviously isnt the variable to turn this off. how to turn this off (see attached pic)
View 8 Replies View RelatedAutoCAD Inventor :: Disable Info Center 2013 / 2014?
Apr 3, 2013Is there a way that the Info Center is not available ? Registry ? XML confoguration ?
It is possible to disable the communication center, but the for whole Info center I can find no way ?
We have installed Inventor on 1000 client WS and the INfo center is not needed ?
Lightroom :: 3 - View Color Temperature Info In Cell / Grid
Jun 20, 2012Is there a way to view color temperature information in a cell in grid and loupe view in Lightroom 3?
View 2 Replies View RelatedRevit :: Architecture 2013 Frequent Fatal Errors
Jul 5, 2012I am having very frequent recoverable errors - havent seen any pattern but happens in veiws and mostly editing operations. I am filling in the error reports and there must be quite a collection now of mine.
View 4 Replies View RelatedAutoCAD Civil 3D :: 2013 / Changing TOP View To TOP-Front View For 2 Overlapped Points
Sep 23, 2013I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedAutoCAD 2013 :: Create Layout View Using View Manager In Paperspace?
Jun 18, 2013I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
AutoCAD 2013 :: How To Scale The Layout View And Remain The Viewport View
May 16, 2012i have a template, created a viewport and fit the model view in the layout space. However, when i scale the template... the viewport model doesn't follows the layout scale. Is there any ways to fit it so that when i scale the template i don't have to set the view again.
View 8 Replies View RelatedAutoCAD 2013 :: Base View Command To Automatically Insert Centrelines In Projected View
Jul 9, 2013Is it possible to automatically insert centrelines in projected views when using the base view command?
I believe it is possible with Inventor.
Using Autocad 2014
AutoCAD 2013 :: Plan View Drawings In Elevation View
Jun 27, 2012I am trying to insert blocks into my drawings and for the most part I have been successful using Design Center. However, I have difficulties turning some of those blocks from the Plan View into the Elevation View, even when they show as elevation blocks. Even the downloads that show as 3-D end up being inserted as 2-D in plan view. In floor plan mode, I have no problem; so how do I turn them into 2-D in elevation mode?
View 1 Replies View RelatedPhotoshop :: Couldn't Use History Brush Because History State Doesn't Have A Corresponding Layer
Aug 20, 2013I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies View RelatedAutoCAD 2013 :: How To Have No View Transition When Using View Cube
Jan 9, 2014Is there a way to have no view transition when changing views with the view cube? I'd prefer that it just switch to the desired view instantly with no transition.
View 3 Replies View RelatedAutoCAD 2013 :: Section View From Base View
Apr 4, 2012When making a Section view from a Base View is there a setting to make the text follow the Text Style and Paperspace text size. Everytime I create a Section View I have to change the text settings in the Properties box.
View 3 Replies View RelatedLightroom :: 5.3 Does Not Show Image Info Tooltips In Grid View Expanded Cells?
Jan 17, 2014In my copy of Lightroom 5.3, image info tooltips do not show in the grid view expanded cells even though that option is activated in view options. Is this an issue with Lightroom 5.3? (Note: Image info tooltips in grid view compact cells and the filmstrip do display, however.)
View 1 Replies View RelatedPhotoshop :: Could Not Use History Brush - History State Lacks Corresponding Channel - CS6?
Mar 24, 2013Everytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
AutoDesk Smoke :: Get Into 2012 Action Setup Via History In 2013?
Feb 8, 2013Is there a way to get into a 2012 Action setup via history in 2013?
View 3 Replies View Related
