AutoCAD 2013 :: Press Pull And Solid History From Menu Bar
Jan 4, 2014Where press pull tools and solid history Menu Bar are?
Not in toolbar and Not Ribbon, from Menu bar.
ADVERTISEMENT
AutoCad 3D :: Press And Pull Not Selecting
Oct 21, 2011Alright, so I was using this site earlier to create a 3D park where, because of how I cad, was told to use the "press and pull" command on closed objects as they will be pulled or pressed into 3D shapes.
Up to this point it has worked on every structure I can think of but this time around it has not.
I am working on a Whale Slide for the park and, for some reason, I am unable to press/pull the parts out in order to complete the 3D effect.
This is the area I am tryin to press/pull:
Whale Slide Selection.jpg
Now, as you can see the entire slide is not complete yet. The reason being that I don't want to cad it all out only to find that it doesn't work. The "tail" part of it was avle to form pefectly fine but this part will not.
I have tried the loft, swipe, etc. commands but they never make a solid object which is what I need. The lines are all connected and I've pressed/pulled angles before so I'm not to sure what is wrong.
Here is the file incase you need it: Whale Slide.dwg
AutoCAD LT :: Pull Down Menu Customization?
Aug 1, 2013On older versions of Acad, I was able to go into the .mnu file and do a macro such as follows:
***POP10
**LIB2
ID_MNLIB2 [&Lib2]
[->Bolts]
[->Bolt ****'y]
[#10]^C^C-insert;F:/STD/LIBS/BOLT-01/BOLT010A;;;;
[* 1/4]^C^C-insert;F:/STD/LIBS/BOLT-01/BOLT025A;;;;
[5/16]^C^C-insert;F:/STD/LIBS/BOLT-01/HH031A;;;;
[*3/8]^C^C-insert;F:/STD/LIBS/BOLT-01/HH038A;;;;
And a new pull down menu would be created and my listing of bolts could be inserted from the std libs bolt file as I clicked through the route. I developed all of this on older versions at a different company. With 2014, I went to the CUSTOMI ZE under the main Drafting and Annotation / AutoCAD Classic pull down and created a New Menu, renamed to BOLTS and then pulled the INSERT command and dropped it ontp the BOLTS pull down and changed the DISPLAY NAME to 1/4" and edited the MACRO from ^C^C _insert to ^C^C_insert;F:/STD/LIBS/BOLT-01/BOLT025A;;;; Seemed to work fine....until I added another 10 bolt assemblies and then noticed that they all showed up as whatever the last bolt I had put in the Macro line was. The display name stayed correct but the insert was gloabally changed on all pull down to whatever the last item was. I have reset 2014 back to the original settings now to clear out everything I had done.
AutoCAD Architecture :: Layer Pull Down Menu
Mar 21, 2011why I can't see all the layers in the pull down menu? This doesn't happen with all drawings, but I've noticed this in a recent files.
View 2 Replies View RelatedAutoCad :: Pull Down Menu Items And Put On Layer 0
Feb 22, 2012I am wondering if it is possible to have pulldown menus items be brought in on the layer that they were created on versus the layer that your template has current. I created pull down menus and (not thinking ahead) put them all on layer 0. They come in with all the attributes they were created with, but come in on the current layer. Can I change that?
View 7 Replies View RelatedAutoCAD Inventor :: How To Create Iproperty With Pull Down Menu
Nov 26, 2013I want to create an iproperty that has a pull down menu where I can make a selection. Can this be done? Can I import this data from a txt, csv, xml file?
View 3 Replies View RelatedAutoCAD Architecture :: Unable To Use Pull Down Menu Commands
Jul 6, 2011I am unable to use pull down menu commands, for example when I want to save as, I have to type it manually in the command menu...to open a file I have to type the file name at command line..
when I click save as or any other command from the pull down menu, it does not work, the command line apprars at the buttom of the drawing asking me to manually make an imput...
AutoCAD LT :: 2011 - Limit To Items Selected To Use Pull Down Menu?
Sep 25, 2012I have installed the two service packs hoping to fix this issue. There appears to be a limit to the quantity of items that can be selected if trying to change a property using a pulldown menu. For example, if I select all items in a drawing (say 25,000 items, didn't test the limit), using (CTRL+A) or with mouse, and all items are not the same color, the OBJECT COLOR menu should be blank (have not value) because there is not only one color for the objects. Same would be true of the Layer menu if all objects are not on the same layer. This does not happen, the current Color or Layer are shown in the menu's. WIth the objects selected, changing the color (say from red to green) has no effect. Same is true if trying to assign all selected items to a specific layer. WIth less items selected (didn't test the limit), things work as expected.
I tried to see if the problem was with the menu, so I used the command line commands. Change, Property, Color, with all items selected works fine. Is there a bug with 2011 LT re this? I didn't have this issue using ACAD LT 2008 previously.
AutoCAD 2010 :: Pull Down Menu And Click Save As Instead Of Window Opening
Apr 17, 2012All of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies View RelatedRevit :: Creating A Pull Down Menu
Dec 20, 2011I am trying to create a pull down menu in a door schedule. My goal is that when I load a door family into my model it will generate as much as the required schedule information as possible. Eliminating the need to manually fill out the schedule.
I have already set up shared parameters for typical schedule items; such as door material, door type, frame material, etc. I would like to set up pull down menus for the schedule items that will differ from door to door (fire rating for example), via the door family type parameters. The research I've done seems to point to using nested families. This is something I am not all that familiar with. Do I need to use nested families to do what I'm trying? If so, what would be the best way to do it? How would I create a nested family?
AutoCad 3D :: Solid History Of Cylinder Subtracted From Cube
Jul 27, 2012I am working with autocad 2013 .. and I want to see the solid history of some cylinder that i subtracted from a cube ... to do that .. i had to open the properties of the object .. and check under "solid history" >> history (record) & "show history" ( = yes )
and it works great ... except that i found out that one some toturials on youtube .. that he press ctrl only to see that ...
if u want to know what iam talking about [URL] ..... (( from 1:33:00 - 1:35:00 )) (( its almost 2 hours vedio ))
its in arabic but ... he mentioned something called "history control".
AutoCAD 2013 :: Converting Complex Solid Surface To Solid Model
Aug 12, 2013I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies View RelatedAutoCAD 2013 :: 2014 Layer State Pull Down?
Apr 23, 2013In autocad 2013 there was a pull down menu in the layer panel for layer states. 2014 does not have that. How to get that to show up in 2014? I also need the pull down menu for dimension styles.
Unless im missing something it seems like it takes more move to do some basic stuff in 2014.
AutoCAD 2013 :: Possible To Pull Audit Trail On DWGs?
Aug 23, 2013We have several people in our firm in and out of drawings. Is there a way to pull an audit trail? of sorts in order to find out who worked on drawing last? Or is this information stored somewhere in the file?
View 4 Replies View RelatedAutoCAD 2013 :: Trim A 3d Solid Using Another 3d Solid As A Cutting Edge?
Aug 27, 2013Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies View RelatedAutoCAD 2013 :: Hatching Looking Solid But Its Not A Solid Pattern
Dec 13, 2012i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies View RelatedAutoCAD Inventor :: 2013 Materials Refresh Styles / Will Not Pull In Updates
Mar 17, 2013in versions of inventor prior to 2013 we were able to quickly and easily refresh a part styles, and thereby obtain the master information for materials, colours and any other style.
i find that now, with the new system of managing materials and appearances that if i need to update a part to reflect the material assests that reside in my materials and appearance library that i have to:
1. open the part, then set the part material to a material other than that i wish to update, then
2. delete the local/ document asset of the material i wish to update, then,
3. assign the material from my material library to the part (to get the library assets to come through to the part).
it seems ridiculous that we have to delete local materials or colours prior to obtaining an updated material or appearance to get the new data into the part.
(the refresh styles command actually appears to be calling in the updates however the updates seem to treat the document assets as the most important. even when managing materials and appearances, the local/document asset seems to take priority over any library asset. again this is different to pre 2013, and is frustratingly slow to work around. all that used to happen in 2012 and prior is we would get a warning that the local style would be overwritten with updated style data = very quick and easy
Photoshop :: History Brush Screenshot From Fly-out Menu (instead Camera At Bottom Of Palette) Doesn't Work?
Apr 22, 2013I noticed that the history brush screenshot taken from the fly-out menu (instead of from the camera icon at the bottom of palette) doesn't work. History brush only works if you use the camera icon at the bottom of the history pallette and then select "current layer" for your snapshot from the drop down menu which shows up after you press the camera icon.
View 1 Replies View RelatedAutoCAD 2013 :: Clearing Command Line History?
Oct 19, 2012Is it possible to clear the command line history? Im running a series of commands that output data to the command line, from there I'm copying and pasting off the command line to notepad. Is possible to clear the command line so that I can run these commands again and not get confused by the previous sequence of data?
View 7 Replies View RelatedAutoCAD 2013 :: Command Line History Doesn't Scroll?
Aug 28, 2013Why is it that when I click in the command line history field (when docked) and roll the mouse wheel I can't scroll it up or down? There is no visible scroll bar until the cursor is moved to the other side of the window (a long way on the 30" display), and grabbing this will scroll the command history, yet the wheel wont work.
If the command line is undocked and the disclosure triangle is clicked to display the history, the scroll wheel DOES scroll the list.
AutoCAD 2014 Win 7 x64
AutoCAD 2013 :: How To View Recovery History With Info About Errors That Were Fixed
Jan 11, 2014I ran RECOVER on a drawing and it told me that three errors were fixed. Is there any way for me to know what the three errors were?
View 2 Replies View RelatedAutoCAD 2013 :: When 2013 Restarted - Menu Changes Lost
Sep 3, 2012When customizing the screen menus, adding a few icons or pull down menus, when autocad is restarted, Autocad reverts back to the default menu. How can I set this up to retain any menu changes I make.
View 2 Replies View RelatedPhotoshop :: Couldn't Use History Brush Because History State Doesn't Have A Corresponding Layer
Aug 20, 2013I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies View RelatedPhotoshop :: Could Not Use History Brush - History State Lacks Corresponding Channel - CS6?
Mar 24, 2013Everytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
AutoDesk Smoke :: Get Into 2012 Action Setup Via History In 2013?
Feb 8, 2013Is there a way to get into a 2012 Action setup via history in 2013?
View 3 Replies View RelatedLightroom :: Delete Part Of History In History Panel?
Oct 8, 2008I can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.
View 6 Replies View RelatedAutoCAD 2013 :: Frame From 3D Solid
Oct 15, 2013when I use the "_list" command in AutoCad I can see the information in the attachm..
when I use "(entget (entlast))" I can't see the values for the frame (Begrenzungsrahmen)
How can I get these values for the frame (Begrenzungsrahmen) in LISP?
Maya :: Bonus Tools 2013 Menu Doesn't Show In 2013?
Sep 4, 2012BonusTools 2013 menu doesn't show in maya 2013,how can show it.
View 3 Replies View RelatedAutoCAD 2013 :: 2D Solid Only Showing As A Frame
Oct 9, 2013I have a user who has been using certain solids for years with no problems but now having one.
These are simple flat object types "solid" objects that are simple direction arrows. If I print it from model space they are filled in. If I look at it and/or print it from paper space (in a viewport) it shows up only as an outline of the arrow.
FILLMODE is set to 1, have tried 0 also, doesn't change anything.
AutoCAD 2013 :: Convert 2D Polygon To Solid
Jan 9, 2013Then I need to extrude it, but when I extrude, it's shallow. So this 2D polygon need to have face. I've tried 3DFACE but then I need to add faces manually. Is there any way to just specify this polygon and have it faced?
View 9 Replies View RelatedAutoCAD 2013 :: Create 3D Solid Object
Jan 23, 2013Creating object in 3D solid? The circles have the same height in both edges.
View 6 Replies View Related
