AutoCad 3D :: Solid History Of Cylinder Subtracted From Cube
Jul 27, 2012
I am working with autocad 2013 .. and I want to see the solid history of some cylinder that i subtracted from a cube ... to do that .. i had to open the properties of the object .. and check under "solid history" >> history (record) & "show history" ( = yes )
and it works great ... except that i found out that one some toturials on youtube .. that he press ctrl only to see that ...
if u want to know what iam talking about [URL] ..... (( from 1:33:00 - 1:35:00 )) (( its almost 2 hours vedio ))
its in arabic but ... he mentioned something called "history control".
View 9 Replies
ADVERTISEMENT
Jun 13, 2013
I am trying to figure out how to put a miter on one end of a 3d solid cylinder?
View 1 Replies
View Related
Jun 13, 2013
how and if I can put a miter on the end of a 3D solid cylinder, I am trying to draw a tank that has a 10 degree sloped bottom with a 1" radius fillet around the bottom at the sloped end.
View 8 Replies
View Related
Oct 30, 2011
I'm currently modeling a propeller and i want to fillet the base of the blade to the hub but the way i have it will only let me fillet it towards the patched surface on top of the cylinder, what can I do?
I would also like to have the fillet be a large radii on the center and be small at the leading/trailing edges.I just tried posting it but the file I have available now is bigger than the limit and I cant compress it to 1.5 mb, while I get acces to the file on monday:
The blade is comprised of 2 lofted surfaces and patched surfaces to join them and make a closed loop, one of the patched surfaces ''hugs'' the cilinder outer surface (hub), when I try to fillet the it tries to smooth from the lofted surfaces to the patched surface, making the arc to the other side i want it to.
View 6 Replies
View Related
Jan 4, 2014
Where press pull tools and solid history Menu Bar are?
Not in toolbar and Not Ribbon, from Menu bar.
View 2 Replies
View Related
Mar 6, 2012
I need to create a cube with the bottom of the cube being flat and then the top being at a slope with all 4 top corners being at different heights, basically I am looking to see if there is a command that let's me drag the corners to where I want it but for the life of me I can't find it
View 9 Replies
View Related
Apr 17, 2013
How do I cut into the side of a circle that has been extruded and subtracted?
View 4 Replies
View Related
Sep 2, 2013
I would like to know how can put planar surface to solid object which surface is curved like cylinder for example. When start draw from first point rectangle of planar surface follow x cordinate not that solid object. How to do that simply?
View 9 Replies
View Related
Apr 14, 2013
How to convert the single line below containing 42" radius curves to a solid 4" diameter cylinder/pipe?
Capture.jpg
View 2 Replies
View Related
Nov 11, 2012
In inventor 2013 I want to extrude a horizontal circle on surface of a bigger vertical hollow cylinder. but what i did it enters into cylinder, and i only want to extrude it on external surface.
View 1 Replies
View Related
Aug 20, 2013
I am trying to learn layers and layer masks. I loaded an image, than control J to duplicate it. I then added a layer mask. Everything good so far. I then went to filters chose a blur. Then went to brushes with black as my foreground color, I just wanted to brush away the blur, and got an error message. "could not use the history brush because the history state does not have a corresponding layer."
View 3 Replies
View Related
Mar 24, 2013
Everytime I try to use my history brush, that error pops up and I have no clue why. If I try to just open a blank document and use the brush it does not give me this error and I can "use" the brush but you cant see anything on the project.
so when this error happens im trying to do a project and say I place a file(picture) into the project and this is the very first thing I do. I place it, then I size the image down some. I then make a new layer to use the brush for behind the picture and then this is when I get the error. I have no clue what is wrong
View 1 Replies
View Related
Oct 8, 2008
I can only see how to delete the entire history in the history panel. Is there a way I can remove only selected states? I am using LR 1.4.
View 6 Replies
View Related
Mar 19, 2012
We have this need to have all of the solids in a drawing to be placed in the "solid" layer.
Sometimes folks are drafting lines to develop these solids, and keeping the lines on the "solid" layer, rather than moving them to another layer, or deleting them altogether.
I could get folks to run this command before leaving the drawing.
I'm thinking something along the lines of:
Select all entities that are on the solids layer that are not solids.
If nil, great, do nothing.
If entities are selected, let me do something with them.
I'm hoping the following can be modified ever so slightly.
(setq non_solid (ssget "X" (list (cons 0 "3DSOLID")(cons 8 "solid"))))
View 4 Replies
View Related
Sep 19, 2012
I'm trying to split a single solid body into 2 solid bodies. The problem is that the body I'm trying to split consists of two separate pieces. I can split a body when it is a single piece no problem, but I'm having the problem when the two pieces are not joined at all.
When I try and split it on the origin plane it gives this error:
"Creating parting line failed. Could not build this Split"
When I try and split it on a work plane lying on one of the pieces it gives this error:
"Creating parting line failed. Modeling failure in ASM. Redefine inputs."
Or, another variation on this erorr:
"Creating parting line failed. Split feature could not create two bodies. Change the Split Tool so that split feature can create two bodies."
View 4 Replies
View Related
Jun 18, 2013
I have a.3ds file imported into Civil 3d. The object imported as a polymesh in Civil 3d. I need the solid 3d object to do some edit like slice or union and subtract.
The question is "How can I import .3ds into Civil 3d as a solid objects or hoe can i convert polymesh to solid?"
View 9 Replies
View Related
Aug 12, 2013
I have finally created the shell of the complex surface that you see. This is only a section of the part because I cannot show the whole thing for proprietary reasons. I formed solid surfaces using the network command. The propblem is that it will not convert to a solid because the surface seams are not "water tight." When the network command created the solid surfaces, the surface seams do not exactly match the lines so there are gaps in all the seams. I have tried blending, patching, etc. and nothing works. how to convert this to a solid without losing the outlines and the shape?
View 3 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Nov 26, 2011
It is making me queasy from rotating my model in 3d space. And I don't think my wedges are sitting right...
note: there is no purpose to the model other than to practice mirroring
View 4 Replies
View Related
Aug 27, 2013
Is it possible to trim a 3d solid using another 3d solid as a cutting edge? I want to cut the edges of a dam using the natural ground surface (which is also a solid) as my cutting edge.
View 3 Replies
View Related
Jul 10, 2013
Is there away to trim the diagonal 3d solid to the top of the horizontal 3d solid in the picture.
View 4 Replies
View Related
Nov 18, 2012
I am making a design on inventor 2013 for a colleague who does not know how to use the inventor.
I want to make the solid and then set something up that allows the user to change a few of the parameters of the solid in a very user friendly way (i.e. a box that says "cylinder radius" and has an input box so the user can enter a value).
View 9 Replies
View Related
Jan 30, 2013
Just noticed that the Nav Cube is being displayed (I usually keep it turned off as its a bit annoying) but its pointing in an odd way as I'm using the world UCS with no TWISTS or anything.
View 2 Replies
View Related
May 4, 2012
2d to 3d no cube appears when I click on base view diologe box appears left hand corner that it
View 2 Replies
View Related
Oct 20, 2011
At work one of our computers is running Acad 2009. For some reason the nav. cube only shows if I use a visual style other than 2D Wireframe. With the latter it's gone, and seeing how 2D Wireframe is what I use 90% of the time I really miss the cube! I can't find a solution to this in the nav. cube options.
View 4 Replies
View Related
Aug 9, 2013
How to round the corners on a 3d cube? I need it to resemble a piece of square tube steel.
View 4 Replies
View Related
Dec 13, 2012
i am having a hatching issue, it seems no matter what hatch pattern i use and what hatch scale, alot of the hatch looks solid instead of the pattern i want, for example i am using currently ANSI37 @ Annotative with a scale of .20 and on the same paperspace page one plan with the hatch shows the cross hatching and the other one below looks solid (see attached) now i can go and say change the hatch scale and it reverts to the cross hatching, but then when i zoom out it goes back to "solid" is it a graphical issue?
View 7 Replies
View Related
Nov 7, 2012
I want to subtract smaller solid from bigger solid.I can not understand how to move smaller solid and place it in front of bigger solid.
View 6 Replies
View Related
Dec 1, 2006
How can i convert some solid bodies to a single solid.
View 8 Replies
View Related
Oct 30, 2013
URL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
View 9 Replies
View Related
May 21, 2012
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies
View Related
