At work one of our computers is running Acad 2009. For some reason the nav. cube only shows if I use a visual style other than 2D Wireframe. With the latter it's gone, and seeing how 2D Wireframe is what I use 90% of the time I really miss the cube! I can't find a solution to this in the nav. cube options.
View 4 RepliesI'm using 2D wireframe as my default view while extruding some solid pipes. Everything appears to work fine, but when I switch to any other shademode eg. 3D wireframe, some of the pipes disappear. In Navisworks they show up as listed objects in the selection tree but cannot be displayed and more imporantly do not get considered in clash detection.
I can't see anything different about the properties of the "hidden" pipes over any others that can be seen.
If I slice the "hidden" solids, then one half or both halves become visible like a normal solid again.
I have hundreds of pipes to model and clash so need to resolve what's happening here. Attached is a small sample file.
my viewport is set for 2d wireframe, even when i have certain layers turned off or frozen the viewable lines in the layyers that are 'on' are broken as if i was in 2D hidden. text wont show up if over a "box" entity, no matter what elevation i set it at. The results come out upon printing as well.
There must be a display setting i am unaware of to fix this. Why do certain entities override others even if the later is at an elevation above it? Someone referred to draw order before but I still do not understand how to make that work.
the command to get my view cube to show back up. I tried "cube" and it was defaulted to <on> but it doesnt show up.
View 9 Replies View RelatedUnder the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies View RelatedI need to create a cube with the bottom of the cube being flat and then the top being at a slope with all 4 top corners being at different heights, basically I am looking to see if there is a command that let's me drag the corners to where I want it but for the life of me I can't find it
View 9 Replies View RelatedWith my viewport set at "2D wireframe", all object lines show regardless of elevation which can make it difficult to read and hard to really get the idea of what is going on in the drawing. Therefore I changed my viewport to "hidden" in an attempt to depict what is higher in elevation over lower objects by having the higher objects cancel out lower objects when running over them. For some reason it works with conduit running over conduit but when the conduit runs over other objects (that are lower in elevation) created with the box command the lines do not get broken.. the lower box object actual cancels out the higher conduit object??
View 2 Replies View RelatedI'd like to section (Divide the area between the upper surface and lower surface of a 3d wire frame into sections.
View 9 Replies View RelatedIt is making me queasy from rotating my model in 3d space. And I don't think my wedges are sitting right...
note: there is no purpose to the model other than to practice mirroring
Just noticed that the Nav Cube is being displayed (I usually keep it turned off as its a bit annoying) but its pointing in an odd way as I'm using the world UCS with no TWISTS or anything.
View 2 Replies View Related2d to 3d no cube appears when I click on base view diologe box appears left hand corner that it
View 2 Replies View Relatedis there any simple way to measure wireframes full lenght in inventor?
View 1 Replies View RelatedHow to round the corners on a 3d cube? I need it to resemble a piece of square tube steel.
View 4 Replies View RelatedI need a create 3D wireframe object. Can't do, really.
Info:
3D Poliline specific object (triangle + rectangel)
view – perspective
EXTRUDE and PRESPULL dont work
[URL]
I am sometimes experiencing that my wireframe is suddenly "left behind" when moving a part in an assembly. I'm using the Shaded With Edges visual option, and the edges are left behind as you can see in the attached picture.
I haven't been able to reconstruct this error, and the part itself works fine. I can save, close, and open in order to fix the wireframe.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
I am looking for a settings which can change the width of the line in 3d wireframe. Some of my users find that too thin. I've looked into application's options and in the registry. I can change almost anything but not that width.
Does any of you allready tried?
URL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies View RelatedI am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies View RelatedA have AutoCad 2000. I have made a 3D wireframe drawing of a boat hull by drawing each "wire" individually. Most of the surface of the hull is curved in two directions. The drawing is made of some straigt lines, polylines, elipses and circles and many arcs and splines. Snap is used everywhere so all lines connects together where they should do.
The problem I have is the drawing is difficult to view as the lines that should be hidden is not hidden. I can't find any way to do this. I have played with the 2D, 3D wireframe, with render, shaded etc. But I cant find any way to do it.
Is it not possible to hide the (what should be) invisible parts of a manually drawn up 3D wireframe drawing?
bonecut1.dwg
I'm trying to create a solid body from a non uniform 3d frame Actually I bought this model and it turned out to be hollow inside. How to make it a complete single solid body? [This model is a part of human bone]
How its possible to make Wireframe with a 3d polyline object?is it Possible?
View 3 Replies View RelatedIn model space, my walls all show with correct colors. However, when I go into a tab, the viewport is showing my walls in different colors than what I have specified. There are no overrides within the viewport. The display is 2D wireframe. If I change the display to 3D wireframe, the colors change to the correct ones, but the dimension hashes are also in wireframe, not filled. Why the 2D display is changing my wall colors and how I can change these to show as I want them to?
View 9 Replies View RelatedI have recently been upgraded to AutoCAD 2011 and have noticed that the Navv Cube is on. I have found by typing in the command NAVVDUBEDISPLY and selecting 0 that this turns it off however it seems to be set to turn back on every existing drawing unless it has been switched off in that drawing and then saved. I didn't use AutoCAD 2010 but have been told that the Navv Cube was turned off unless you selected it to be on. Is there anyway to have toe 2010 option or is this another feature of AutoCAD that they don't want to have changed
View 9 Replies View RelatedHow does one display obscured lines using different linetypes in the 2D wireframe setting under visual style settings. I need to adjust this setting to view all drawings as 2D wireframes in the viewports in all layouts for more accurate dimensioning (which I do in paperspace)?
View 0 Replies View RelatedHow can i quickly make my view cube operational again? I'm in parallel projection.
View 7 Replies View RelatedI'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one)
View 4 Replies View RelatedIs there a way to change my view cube labels?
View 3 Replies View RelatedI recently installed the SketchUp plugin in the hope that I would be able to easily and effectively transfer SketchUp models into AutoCAD and subsequently into Revit.
However, upon importing the SketchUp model, extra wireframe is added to the flat surfaces from vertex to vertex. This does not affect the CAD model as such as it appears that these lines are necessary for CAD to create the surfaces.
Though when imported into Revit from CAD, these surfaces are unable to be processed and the model becomes incomplete, also failing to identify the windows and doors that had been previously identified as the model had been taken from Revit, through CAD and to SketchUp with no problems and then all the way back again.
What is the next step of importing it back to Revit as I am unsure how to retain its levels (i.e Floor plans).
The problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies View Related