AutoCad 3D :: How To Render Manually Created 3D Wireframe
Aug 21, 2011
A have AutoCad 2000. I have made a 3D wireframe drawing of a boat hull by drawing each "wire" individually. Most of the surface of the hull is curved in two directions. The drawing is made of some straigt lines, polylines, elipses and circles and many arcs and splines. Snap is used everywhere so all lines connects together where they should do.
The problem I have is the drawing is difficult to view as the lines that should be hidden is not hidden. I can't find any way to do this. I have played with the 2D, 3D wireframe, with render, shaded etc. But I cant find any way to do it.
Is it not possible to hide the (what should be) invisible parts of a manually drawn up 3D wireframe drawing?
View 9 Replies
ADVERTISEMENT
Nov 27, 2012
Is it possible to export/render wireframe 3D objects from Action?
View 3 Replies
View Related
Feb 10, 2013
The texture and color changes in LR4.
View 1 Replies
View Related
Apr 19, 2012
I have created a 3d model of a football stadium, but when I try to render it, it comes up with this message and it cannot render the scene. I've tried everything I can to fix it, but nothing has worked.
View 9 Replies
View Related
Jun 14, 2012
With my viewport set at "2D wireframe", all object lines show regardless of elevation which can make it difficult to read and hard to really get the idea of what is going on in the drawing. Therefore I changed my viewport to "hidden" in an attempt to depict what is higher in elevation over lower objects by having the higher objects cancel out lower objects when running over them. For some reason it works with conduit running over conduit but when the conduit runs over other objects (that are lower in elevation) created with the box command the lines do not get broken.. the lower box object actual cancels out the higher conduit object??
View 2 Replies
View Related
Apr 29, 2011
I'd like to section (Divide the area between the upper surface and lower surface of a 3d wire frame into sections.
View 9 Replies
View Related
May 16, 2013
is there any simple way to measure wireframes full lenght in inventor?
View 1 Replies
View Related
Oct 20, 2011
At work one of our computers is running Acad 2009. For some reason the nav. cube only shows if I use a visual style other than 2D Wireframe. With the latter it's gone, and seeing how 2D Wireframe is what I use 90% of the time I really miss the cube! I can't find a solution to this in the nav. cube options.
View 4 Replies
View Related
Jan 12, 2012
I need a create 3D wireframe object. Can't do, really.
Info:
3D Poliline specific object (triangle + rectangel)
view – perspective
EXTRUDE and PRESPULL dont work
[URL]
View 9 Replies
View Related
Apr 11, 2012
I'm using 2D wireframe as my default view while extruding some solid pipes. Everything appears to work fine, but when I switch to any other shademode eg. 3D wireframe, some of the pipes disappear. In Navisworks they show up as listed objects in the selection tree but cannot be displayed and more imporantly do not get considered in clash detection.
I can't see anything different about the properties of the "hidden" pipes over any others that can be seen.
If I slice the "hidden" solids, then one half or both halves become visible like a normal solid again.
I have hundreds of pipes to model and clash so need to resolve what's happening here. Attached is a small sample file.
View 2 Replies
View Related
May 27, 2013
I am sometimes experiencing that my wireframe is suddenly "left behind" when moving a part in an assembly. I'm using the Shaded With Edges visual option, and the edges are left behind as you can see in the attached picture.
I haven't been able to reconstruct this error, and the part itself works fine. I can save, close, and open in order to fix the wireframe.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
View 9 Replies
View Related
May 14, 2012
I am looking for a settings which can change the width of the line in 3d wireframe. Some of my users find that too thin. I've looked into application's options and in the registry. I can change almost anything but not that width.
Does any of you allready tried?
View 3 Replies
View Related
Mar 7, 2013
bonecut1.dwg
I'm trying to create a solid body from a non uniform 3d frame Actually I bought this model and it turned out to be hollow inside. How to make it a complete single solid body? [This model is a part of human bone]
View 6 Replies
View Related
Apr 13, 2012
How its possible to make Wireframe with a 3d polyline object?is it Possible?
View 3 Replies
View Related
Jan 8, 2013
In model space, my walls all show with correct colors. However, when I go into a tab, the viewport is showing my walls in different colors than what I have specified. There are no overrides within the viewport. The display is 2D wireframe. If I change the display to 3D wireframe, the colors change to the correct ones, but the dimension hashes are also in wireframe, not filled. Why the 2D display is changing my wall colors and how I can change these to show as I want them to?
View 9 Replies
View Related
Apr 5, 2011
How does one display obscured lines using different linetypes in the 2D wireframe setting under visual style settings. I need to adjust this setting to view all drawings as 2D wireframes in the viewports in all layouts for more accurate dimensioning (which I do in paperspace)?
View 0 Replies
View Related
Aug 1, 2012
I keep getting a dialogue box that says "Revit was unable to render the view due to an unknown error during render calculations. The rendering operation will be canceled." The only option is to click "close" and when i do so, it continues to render but only the sky and grass. My buildings are not present.
View 2 Replies
View Related
Jan 1, 2014
I'd like to export AutoCAD file from a model built in 3Ds Max to get some engimeering drawings(as below) But the dwg file export from 3Ds Max is always with the wireframe(as the last one)
View 4 Replies
View Related
Jul 30, 2013
I recently installed the SketchUp plugin in the hope that I would be able to easily and effectively transfer SketchUp models into AutoCAD and subsequently into Revit.
However, upon importing the SketchUp model, extra wireframe is added to the flat surfaces from vertex to vertex. This does not affect the CAD model as such as it appears that these lines are necessary for CAD to create the surfaces.
Though when imported into Revit from CAD, these surfaces are unable to be processed and the model becomes incomplete, also failing to identify the windows and doors that had been previously identified as the model had been taken from Revit, through CAD and to SketchUp with no problems and then all the way back again.
What is the next step of importing it back to Revit as I am unsure how to retain its levels (i.e Floor plans).
View 1 Replies
View Related
Jan 23, 2013
I need information on how to create a 3D Solid Model from wireframe and surfaces using AutoCAD 2013.
View 7 Replies
View Related
Jun 8, 2012
I've got a very complex 3D AutoCAD model (exported as DWG) that's come from an external company that use Micro station. Ultimately I'm trying to link it into Revit, but I'm having problems doing this. What I'd like to do is convert the 3D faceted model into a wireframe ONLY model, ie. remove all the faces. (I've got another wire frame model in Revit already so I know this will work) I know you can change the 'view' by using SHADEMODE but I'd like to actually remove the faces from the model all together leaving only the lines on the 'edges'. So the Wireframe view of Shade mode is exactly what I want but I need to get those faces out somehow.
I've tried exploding it all, but that only gets rid of a few faces ...thought exporting to DXF might do it but hasn't.
View 1 Replies
View Related
Aug 17, 2012
my viewport is set for 2d wireframe, even when i have certain layers turned off or frozen the viewable lines in the layyers that are 'on' are broken as if i was in 2D hidden. text wont show up if over a "box" entity, no matter what elevation i set it at. The results come out upon printing as well.
There must be a display setting i am unaware of to fix this. Why do certain entities override others even if the later is at an elevation above it? Someone referred to draw order before but I still do not understand how to make that work.
View 1 Replies
View Related
Dec 2, 2011
I'm trying to create a dynamic block with visibility states for different wireframe sections, with objects (simple lines) in x,y & z planes.
The block represents a bay of scaffolding, which dynamically arrays in length in set bay sizes, but i want to add visibility for different height section arrangements (i.e number of scaffold lifts in 2m lift heights)
I have this working with the maximum section (16m high), and I hoped to be able set visibility states from for the sections 16m down to 6m by "make invisble" the upper scaffold lifts in reducing heights.
The block editor will only give me the plan (x,y) view to modify the dynamic elements. Is there a way to view left, right or even isometric in the block editor?
View 1 Replies
View Related
Jul 10, 2012
I have plan and elevation views in autocad 2012. I am adding a new entry to my house and I just want to see what it will look like in a perspective view or something.
I went to the library and took out a tutorial on autocad 3D drawing. After 8 hours all I can draw is a stupid birdhouse with no hole for the bird to go in. I am not stupid and I am good with computers, so I figure that I am completely missing something here.
Is there not some way for me to take my plan and elevations and just put them together like one would a paper model?
Is there not some quick and easy way to mock up parts of houses?
I am just a homeowner, and I don't want to pay an architect to do this for me. Maybe I am using the wrong tool? Maybe I need Autocad Architecture? Maybe some other product? I am very frustrated.
So here is my challenge to all of you: assume that your dad or your friend wants to build a deck for his house, and he wants to model it in 3D to see what it will look like. He has never done anything in 3D in AutoCAD, but he can draw 2D drawings. He has exactly 8 hours to learn whatever tool he needs, AND, to produce the 3D drawing.
Note: a simple wireframe drawing is fine, I can color the thing with pencil crayons or whatever after if I need to.
View 9 Replies
View Related
Apr 13, 2011
The same scene, same settings, produce 2 very different outputs in max 2011 and 2012, render to texture for normals is currently useless in max 2012.
The blue one is a correct tangent normal map created from a sphere in max 2011, the colored one is the the one created inside max 2012 from the same objects and settings, and the last is another sample of normals generated in max 2012.
View 9 Replies
View Related
May 4, 2012
All I want is to manually add a station in between to other stations.... ie I can produce this-->
However I would prefer to produce this -->
Which has an additional station added as required from time to time.
View 3 Replies
View Related
Apr 11, 2012
If you were to manually enter a traverse in 2012 how would you do it? I mean:
1. Set up on a known point
2. Backsight a known point
3. Move the setup a few times
4. Foresight a known point (either the same BS point above - closed - or another known point - closed connected)
The COGO geometry editor does not really seem to do this.
Am I limited to the survey command editor and the survey command language? Or is there something else?
View 2 Replies
View Related
Feb 28, 2013
I'm doing a revision rearrangement and would like to add to the BOM New, Existing, and Relocated properties. The problem is that each individual component may be unique. Ie. I have a desk w/ 3 identical monitors. One monitor is existing and the others are new. I'd like to have the BOM show that I have 3 monitors, 2 are new and 1 is existing. The BOM would have 4 columns, one for the total number of parts and 3 for the New, Existing, and Relocated counts.
I don't mind if the new columns need to be manually updated.
View 9 Replies
View Related
Oct 23, 2013
I need to manually override the weight and location of the c.g. inside a parts iproperties. I know how to override the weight, but I do not know how to manually override and modify the location of the c.g.
View 2 Replies
View Related
Nov 23, 2011
After doing a few renders, my drawing now reverts to wireframe every time I close it, save it, regen. how to stop this from happening? It will basically not stay in 2D wireframe and the dwg has become very sluggish.
View 3 Replies
View Related
Aug 4, 2013
I've recently installed AutoCAD 2014 and noticed when I try to select objects behind a solid (in wireframe) it will select the face of the solid and I am not able to select any objects behind that solid. In the past, while in wireframe, I wasn't able to select a solid unless an edge was selected. Now if I click on a face it will select that item, which is not allowing me to select anything behind it. Is there a variable to change the way a solid is selected while in wireframe?
View 3 Replies
View Related
