AutoCAD Inventor :: How To Measure Wireframe
May 16, 2013is there any simple way to measure wireframes full lenght in inventor?
View 1 Replies
ADVERTISEMENT
AutoCAD Inventor :: Wireframe Left Behind In Assembly?
May 27, 2013I am sometimes experiencing that my wireframe is suddenly "left behind" when moving a part in an assembly. I'm using the Shaded With Edges visual option, and the edges are left behind as you can see in the attached picture.
I haven't been able to reconstruct this error, and the part itself works fine. I can save, close, and open in order to fix the wireframe.
Product Design Suite Premium 2014
Inventor 2014 Professional
Windows 7 Professional 64 bit
Intel Xeon E3-1240 @ 3.4 ghz
Nvidia Quadro 600
8.00 gb RAM
AutoCAD Inventor :: Line Width In 3d Wireframe
May 14, 2012I am looking for a settings which can change the width of the line in 3d wireframe. Some of my users find that too thin. I've looked into application's options and in the registry. I can change almost anything but not that width.
Does any of you allready tried?
AutoCAD Inventor :: Customizing Measure Tool
Apr 28, 2006Whenever we use measure tool it will show the a dialog box with valves of x,y,z, delta X, delta Y & delta Z. I want to customize the same as per the attached image.
Customize this, dialog box will not disappear(modal) after entering into any other command so no need to remember the values of x,y....etc.
AutoCAD Inventor :: Measure Overall Model Extents?
May 11, 2013I have some users that use Solid Viewer that I am cosidering switching to Inventor LT. I use Inventor Pro. There is a feature in SolidWorks that let's them quickly display the overall extents; length, width, and height for quoting purposes. The tool creates a transparent box around the 3D model and displays these dimensions.
View 6 Replies View RelatedAutoCAD Inventor :: How To Measure Inside A Part
Aug 12, 2013I made a screw that intrudes into a part, but not to the end.
I want to measure the remaining distance, so, i have to select the face of the screw and the hole in the part.
I cannot do that since the program doesn't let me select the faces.
I tried to slice the part with the half section view, but when i press the measure tool the section view ends.
AutoCAD Inventor :: How To Measure In Degrees And Minutes
Feb 20, 2011How do I get Inventor 2009 to measure in degrees and minutes. Below is what I am trying to do.
View 3 Replies View RelatedAutoCAD Inventor :: Part Measure Gets Planes
Apr 10, 2013I've created Custom properties, parameters, to get the outside measure of the parts and it works fine until we create and leave activated a work plane outside the part so it measures not until the end of the part but until the plane.
View 9 Replies View RelatedAutoCAD Inventor :: How To Measure Height Of Object
Apr 2, 2013Is there any place in Inventor which shows the dimensions width / height / length of an object?
Please take a look at the attachment M3.jpg first.
I want to measure the overall height of this object. This is just a simple object to show my problem. I want to use the ruler tool of Inventor 2013 to measure the height, but I cannot make it.
I click the bottom line of thy cylindrical part, then I want to click the top most point of the half sphere, but I cannot.
Inventor always highlights the whole half sphere so I cannot specify the second measurement point exactly.
Why I cannot measure what I want to? The only solution is that I put the object in front view an draw a sketch and measure the sketch. What for I have a measurement tool?
AutoCAD Inventor :: Project In The Measure Command
Apr 19, 2012(see attached)
I have what seems like an odd, but needed request here. I have an engineer that is looking for a way to measure between two lines that are not co-planar, but he wants the measurement in a specific plane.
Basically he wants to be able to select a plane or line, then be able to select the second plane or line and have the tool automatically "project" it to the plane of the first selection and give the angle in that plane.
Ref the attached - the purple lines are in the XY plane, the blue line is not, but he wants to measure the angle from the X axis to that line but in the XY plane as seen by the green line that was manually projected to that plane.
Without having to manually create a sketch and project the entities that need to be measured (this example is an extremely simplistic one), how can this be done? Measurements in this way need to be done in numerous complex angles.
He's claiming Catia, Pro/E and of course, SW can all do this "project" within the measure tool. I figured if that's indeed the case, Inventor sure be able to.....JD, you're the resident expert on SW & Inventor....do you know what I'm referring to?
AutoCAD Inventor :: Measure Bent Rod Length?
Dec 27, 2011In an attempt to aid purchasine I have started adding a length and width parameter to our models. These parameters are converted to a purchase parameter either in square feet or per foot length depending on how the material is purchased. I would like the paramater to also automatically update if the part size is changed. I now come to a part made of a round shaft that is bent and am looking for a way to get an accurate length for it. The part is made with a sweep and the square corners are radisuesd in the sewwp. I could pull the three dimensions in the sketch and add them together to roughly appeoximate the length but that would not be quite accurate. As the number I come up with will also be used by fab to cut the rod before bending I would like it to be correct. Is there a way to generate an accurate length that can be saved as a parameter? In SWx I would create a datum axis in a sketch that could be used but I am not seeing how to do that here.
View 9 Replies View RelatedAutoCAD Inventor :: Measure Length Of Cylindrical Face?
Jul 11, 2011How can i get the length or diameter of a cylindrical face by selecting the face as shown in the attached picture.
View 4 Replies View RelatedAutoCAD Inventor :: Use Measure Distance Tool From VBA Form
Nov 8, 2012I have a VBA form coded that we use to generate part numbers and descriptions that then populate the iProperties. We often use the part sizes in the description. I would like to be able to put a button on the form that allows users to use the "Measure Distance" tool so that they can measure the part while they are creating the description.
Any code that I could use to activate the "measure" tool while a vba form is active?
AutoCAD Inventor :: Measure Dimensions In A Derived Part?
Sep 21, 2012I´m trying to measure the base dimensions of simple geometric shapes. I started out with plates since they are easy to measure as long as they sit in 90°, 180° and 270° positions relative to the origin. Then Measure.ExtentsLength, Measure.ExtentsWidth and Measure.ExtentsHeight will give me the base dimensions of a plate.
However, if the plate sits abitrary relative to origin this will obviously fail, since Measure.Extents only measures in x,y,z
Is there any way how I get positions of the geometry that is in the part, like corners surfaces on the B-REP so I can calculate the dimensions properly for a plate. I´m not sure if this is possible with iLogic. I have a strong suspicion VB.net would be needed for this.
Another problem I have is that derived parts don´t get triggered to run a script when I change the geometry in the Multibody Part and the rule is set to run by any modelgeometry change.
AutoCAD Inventor :: Measure Distance Between Centers Of Balls?
Jun 21, 2012I'm just playing with a rotor head of a model helicopter (see picture). For proper initial alignment, all main parts shall be setup parallel against one-another. This can be done by aligning the length of the ball linkages.
But therefore I need to know the distance of the ball centers. How can I do that? (STEP file for testing with different Inventor versions is attached).
AutoCAD Inventor :: How To Measure Angular Displacement On FEA Simulation
May 13, 2013What is the best way to measure angular displacement on a FEA simulation?
A simple example is described here: The screen shot shows a long rigid body (left) mounted on a bracket (far right). The legs of the bracket are fixed on the right. There is a down force on the left. The goal is to measure vertical displacement on the left. All of the vertical displacement comes from flexing at the bracket, so this can be considered an angular displacement.
Is there a way to measure this vertical displacement without the long rigid body or it's mesh elements?
Or is there a way to turn off the mesh elements on the rigid body? I want to eliminate the unnecessary FEA computations to speedup the simulations.
AutoCAD Inventor :: Change Units Of Measure In IProperties?
Jun 21, 2013Is it possible to change the units of measure in the iProperties from lbmass to tons for instance? I deal with very large, heavy concrete objects and tons is the way we show mass. Also use cubic yards instead of cubic inches.
View 7 Replies View RelatedAutoCAD Inventor :: Measure A Cross Sectional Area
Aug 19, 2012Is there an 'easy' way to see a cross sectional area and measure it? I have tried getting a cross-sectional area by off-setting a work plane into the model, sketching on that plane, and pressing F7.
This shows the cross-sectional area, but when I click the inspect>area I can not select the cross-section. Any thoughts besides creating a sketch on that surface and extruding it to remove; taking the area measurement, and then undoing the extrusion?
AutoCAD Inventor :: Measure Or Position Is Changed In The Skeleton
Sep 20, 2012Is this possible to change?
Everytime a measure or position is changed in the skeleton, the units are reset to "0,123", which gives this many decimals for the parameter in the Bill of materials list and drawing partslist.
Ex.
The column "Dimension" in my BOM. The parameter <Rod_Diameter> is imported:
The rod diameter (4,000 mm from the skeleton) is set to export in the parts parameter list, right clicked and given custom property format to only show "4" instead of "4,000 mm"
It's written as "=Ø<Rod_Diameter>" in the custom property "Dimension" for the part (or in a "Dimension" column in the assembly BOM).
Now it tells "Ø4" in the partslist and bill of material. CORRECT!
But if anything is changed in the skelton, with this or another dimension, this parametric setup is reset to show "Ø4,000 mm" again. Too many decimals for my partslist.
That's the problem. With 100 parts in different subassemblies with 2 to 3 exported parameters in each part, it's a lot of setup to get the automatic dimension text in the partslist from the structured BOM if it does not remember the custom proparty format for the parameters.
Could this be setup in any way so that the part keeps it's formatting. It would save ALOT of time or higher the quality for my automated drawings.
AutoCAD Inventor :: Way To Measure Volume / Empty Space Within Assembly?
Jun 24, 2011Is there a way to measure the volume/empty space within an assembly? Example: I have a tank with a transformer assembly inside of it, need to know how much oil is required to fill the unit.
View 9 Replies View RelatedAutoCAD Inventor :: How To Create ILogic Rule To Measure Between 2 Planes
Jan 3, 2013How to create a measurement between two planes using ilogic rules?
I have created the planes on the asssmbly parts but dont know how to directly pick them.
The measurement is going to be used as reference dimension.
AutoCAD Inventor :: Do Not Have Select Other Option In Measure Distance Tool
May 17, 2013I would like to measure the distance in assembly.
The distance is between two hole axis.
I use Measure Distance tool.
I do not have the “Select Other” option to choose axis supposedly pop up ofter the preset delay time. Seems like Application Option – General – Selection is responsible for that?
But it is checked to ON as on pic attached. My laptop machine works fine with the same settings.
AutoCAD Inventor :: Using Measure.ExtentsLength In Drawing To Get Model Dimensions?
Mar 2, 2012Is it possible to use the Measure.ExtentsLength in a drawing to get model dimensions?
What I am trying to do is get the overall dimensions of the model and place them in a sketch block in the drawings so our machinist can easily reference the stock material. I can't figure out how to get the overall model dimensions.
Windows 7 x64 -24 GB Ram
Intel i7-3840QM @ 2.8GHz
nVidia Quadro K5000M - 4GB
Inv 2013 SP2
Vault Collaboration 2013 Update1
AutoCAD Inventor :: How To Programmatically Update Units Of Measure For A Part
Aug 6, 2012I am trying to programatically update Units of Measure on a part or document through Document Settings, but the changes are not reflected. I cannot save the file, because the file is a result of import, so I want to leave it up to the user. During import, I am recognizing what type of units the import file has, and I need to impose them on the document, and immediately show. I cannot use templates. There is a similar issue when the Units of Measure are updated manually through the screen, they are not reflected.
View 3 Replies View RelatedAutoCAD Inventor :: Measure Hole Diameter Of Thread M20x2.5
Sep 10, 2013In the part attached you can measure the hole diameter of the thread M20x2.5
It is 17.294, but the smallest diameter, the tap drill, in the Thread.xls file is 17.5
AutoCAD Inventor :: ILogic Rule To Measure Loop Length
Oct 30, 2013I have just started to use ilogic, what i want to do is measure the length of a loop in a sketch and then use this measurement as a parameter.
I have found this rule that will measure the loop length and display it in a message box
Dim se As SketchEntity = ThisDoc.Document.ComponentDefinition.Sketches(1).SketchLines(1)
MsgBox(ThisApplication.MeasureTools.GetLoopLength(se)*10 & " mm")
but i do not know how to capture the measurement as a parameter .
AutoCAD Inventor :: Thin Red Line In Measure Command Not Shown
Sep 19, 2013Inventor 2014.
When you measure something with the distance command, according to the type of file, the last zoom you did, your graphic card and probably the speed of the wind, the little red line won't show.
Normally when you measure something, a thin red line is shown were the distance is calculated. But in my laptop, and both pc's of my client, Inventor shows this line only in parts, not in assemblies. I've got a Quadro 2000M, my client got Quadro FX 1700 and 1800, all with the recommended drivers.
So I tried with 3 other laptops. On one of them (with a K2000M) if you do a measure right after the file open, it give you the line, if you zoom with the measure command open, the line disappear and won't show again until you close and open the file again. But if you zoom without the command active, the line is shown normally. But it's not working like that on all machines.
AutoCAD Inventor :: Displaying Loop Measure Of A Spline / ARC / Slope
Mar 21, 2013I want continuously to display the loop measuring of a Spline/Arc/Line/Slope (or even have it as a dimension / parameter on a sketch/part) because it change in relation to the block-position that constrains to the slope.
View 3 Replies View RelatedAutoCAD Inventor :: Using Measure Tool Without Opening Part File?
Jun 19, 2012Can we use measure tool without having to open the part file?
Say directly in the viewer or in vault viewer.
C1
Inventor Professional 2013
Vault Collaboration 2013
AutoCAD Inventor :: ILogic Measure Extents Snippet And Move Face
Nov 2, 2011We use the snippets from iLogic on all of our parts to measure the length, width or height of our parts. However, we have noticed that when a 'Move Face' operation or a 'Replace Face' operation is used, the length measured does not seem to take into account the Move/Replace operations.
Are the Move/Replace operations different than other features like Extrude/Revolve? Is there something "ghost-like" about them??? The edges work fine on the drawing side, so I'm not sure what is different. Maybe it is the iLogic snippet?
In regards to it being the snippet, is there another code I can use that doesn't require specific feature or part information built in?
Inventor 2013 Product Design Suite
Vault Professional 2013
Windows7 x64
Autodesk Inventor Certified Professional
AutoCAD Inventor :: How To Add Measure (Distance) Command To Quick Access Toolbar
May 9, 2012I want to add the Measure (Distance) command to my quick access toolbar. When I right click on the Measure button the "Add to quick access toolbar" is grayed out in 2013.
Also why can't they make it so when I add something to the quick access toolbar stays added to all file types. I have to add it to .ipt, .iam, .dwg...
BTW Not real impressed with 2013 so far.
Using Inventor 2013