I need to manually override the weight and location of the c.g. inside a parts iproperties. I know how to override the weight, but I do not know how to manually override and modify the location of the c.g.
View 2 RepliesHow can I manually change the part density in Inventor 2012?
View 9 Replies View RelatedHow do I change the default save location?
It goes to my documents, but in options I can't find anything with that path.
I want it to go to a different folder but I can't figure out how to make it do that.
Trying to make it where I wouldn't have to deal with the idiosyncrasies of the Project file, I created a default project that was rooted to my top level network drive.
All was fine until I did some importing from other formats. All of the sudden there was a new top level network folder called imports.
Ok, bitch session aside on the uselessness of project files, is there an entry in the project file details where I can change the location of this folder?
In SW, I was accustomed to importing a file and then saving it where I was going to use it, not in some convoluted folder structure that had no relation to my active working location.
I mean, why on earth would I want a separate folder for every little part I import?
We need re-location the diameter dimension after we change the drawing view's scale. but we didn't know how to change the Startpoint of the dimension (mark with Red word "1"), just find the text location.
Who knows how to set the new point to for the startpoint?
How to change the Default Templates Location from the installation directory to the Network Location so that my Mechanical Design Team can use our Assigned Templates.
View 1 Replies View RelatedI have an embeded excel chart on my drawing called CLASS 125 Single Disc.xls. I want to switch this chart with another one known as CLASS 150 Single Disc.xls. How do I do this? I am using Autodesk Inventor 2011.
View 9 Replies View RelatedWhen we derive sketch from another piece, this is inserted in a fixed location and orientation in our piece. There any way to make changes to this sketch derivative. For example change its location and orientation to fit the geometry created by the sketches of our piece.
View 1 Replies View RelatedIs there a way to have the Revision Cloud be put on the correct layer by default rather than having to manually change layers??
IDSP Premium 2014 (mainly Civil 3D 2014 UKIE SP1 & Infraworks with some limited 3ds Max Design)
Win 7 Pro x64, 256Gb SSD, 300Gb 15,000 rpm HDD
16Gb Ram Intel Xeon CPU E5-1607 0 @ 3.00GHz (4 CPUs), ~3.0GHz
NVIDIA Quadro 4000, Dual 27" Monitor, Dell T3600
I'm doing a revision rearrangement and would like to add to the BOM New, Existing, and Relocated properties. The problem is that each individual component may be unique. Ie. I have a desk w/ 3 identical monitors. One monitor is existing and the others are new. I'd like to have the BOM show that I have 3 monitors, 2 are new and 1 is existing. The BOM would have 4 columns, one for the total number of parts and 3 for the New, Existing, and Relocated counts.
I don't mind if the new columns need to be manually updated.
I'm creating temp projects out the wazoo. There are so many unresolved projects that Inventor's window to "Click okay and stop searching for these projects window" is longer than my two widescreens can display stacked on top of each other in portrait view...
Is there any way to manually clear the projects list?
Inventor 2012
Vault Pro 2012 16.1.58.0
Intel Xeon X5690 @ 3.47 GHz
12.0 GB Ram
Windows 7 x64
AMD FirePro V7900 - 8.830.5.6000
I've had this problem before, and it randomly popped up again today.
This time restarting Ai fixed the issue the first time. I just don't know if this was human-error/setting on my end, or a minor bug to report.
So I create a CMYK Ai doc. Create some black text and/or shapes. Then decide to change color to rich black by manually entering CMYK values (in this case, 60, 40, 40, 90), select ok. However, the colors revert back to original percentages (75, 68, 67, 90).
In past versions, it's happened once or twice, and restarting Ai didn't solve the first time.
I would like to know if it is possible by command to change file/folder location that are normally set up in the OPtions>Files tab.
I would like to know because everyone in the office uses a specific LISP routine on which i set some standard settings.
I would like to be able to change/add/delete file locations of the 'Tool Palettes File Location' and the 'Default Template File Name for QNEW'.
IT moved all of our projects to a new directory and have subsequently broken all the survey events. Is there a way to update survey events so they can find the original file again or does each event need to be redone to fix this?
e.g. I brought in a fbk located at p:/prj/6000 that file is now located in p:/6000.
Due to circumstances beyond my control the directory path that my tool palettes are mapped to needs to be changed.
From: T:Toolpalettesetc...
To: X:Toolpalettesetc...
I have hundreds of blocks in the tool palettes that are looking for their source file on the "T" drive.
My brain says "Find / Replace T: with X: " using Notepad in all of the ATC files.
Is there a better method to tell those blocks to look on the "X" drive?
I am having a problem with AutoCAd LT 2014 incorrectly locating mouse clicks with respect to the change page layout arrows. In order to reproduce this error you must have enough page layouts in a drawing to highlight the arrows (bottom left) which change the layout tab. Clicking on the right (or left) arrow several times consecutively will be incorrectly identified by AutoCad as a double click on the 1st page layout visible and will execute the rename feature. However the mouse pointer is not over that layout tab, it is clearly over the right arrow.
Why does AutoCAD read a clicks in this area incorrectly and register them instead nearly 30 pixels to the right.
Any work around as I commonly use the arrows to cycle through pagelayouts in drawings which have 50+ page layouts.
I have also noticed that AutoCAD will preview page layouts when hovering the mouse over the page layout change arrows, this reinforces the belief that AutoCAd is not correctly identifying the mouse position in that area.
I am using a variety of different plug-ins for 3ds max, like FumeFX and RayFire, but my main harddrive hardly has any space left. So whenever I try to preview my creation in 3ds max, it always runs out of space and can't continue. i've tried for a very long time to find out how to change the location of the preview output, but everything i try doesn't work. I even changed a setting that specifically said "preview" and changed it to my other hard drive (which has 729 GB's free) and it still runs out of space.
how to change where all the preview files go for plugins such as fumefx and rayfire.
How to change the storage location in Lightroom 3.6.?
I use my internal hard drive NTFS of my MacBook Pro as my storage location of Lightroom 3.6. being installed in Snow Leopard now but the data of my photos get too big now. I have two fast and big external hard drives eSATA now which I want to use for my data/photos. I know how to copy the data from one hard drive to another but I don't know how to change the settings in connection with Lightroom easily. I still want to watch all fotos on my MacBook Pro but don't want to save any fotos on my internal harddrive any more. Isn't it possible to have the programm Lightroom on my internal harddrive but the data on two times on two different extermal hard drives? If I look at Lightroom - settings of catalogue - I see that the internal harddrive location is my storage location now but I my two external harddrives don't appear as folders. Why? How to change that so that the external hard drives appear in Lightroom and I can watch all my fotos immediately (sometimes using external hard drive 1 and sometimes using external hard drive 2)?
My external hard drives are in HFS+ but I use the software of Paragon so that there shouldn't be any problem to read and write the data (I use also Final Cut Express so my external hard drives are HFS+ and not NTFS).
I want to impert many data from CDs - should I copy the fotos first to my external hard drive and then import it into Lightroom or is it easier to import the data directly from the CD in Lightroom so that I don't have to name the folders two times? I see that I have to sort the fotos from the CDs in new different folders and an used to do that in Finder of my MacBookPro. In Lightroom I don't want have to click each of hundreds of fotos to be able to put it into the right folders ... But how to import only a part of a CDs quickly into the right (newly created) folders?
1. Where do I go in LR to change the location of the library?
2. Why are all the 2013 images I'm importing into LR going into the 2012 Photo Folder? Can I move all of the 2013 folders from 2012 Folder into the correct 2-13 Folder
3. Instead of giving my the correct import data 130712_photos, I ened up with a folder named 20130712? How do I correct this problem?
I was trying to load in some tool presets for my pen tool in Photoshop. Upon doing so I noted that clicking on "Load Tool Presets..." or alternatively any of the quick jump links i.e. art history, pencil brushes, etc... Photoshop would load absolutely nothing.
Upon looking to see where Photoshop was looking for these tool presets I noticed that it was looking here:
"C:Users*********AppDataRoamingAdobeAdobe Photoshop CS6PresetsTools" instead of looking here: E:AdobeAdobe Photoshop CS6 (64 Bit)PresetsTools --- which is where the presets are actually located.
Is there any way to change where Photoshop looks by default? How did it get set to the incorrect location in the first place.
When I click on File, Open in CS2 (it came with the computer) Pictures is always the Library that opens. Can this be changed? I have created a Library called Photography. That is where I download and store my photographs and where I work on them.
View 3 Replies View RelatedIn any case, does anyone know how to change the "location of installation media" for PhotoShop CS3?
I bought the download version and later burned a CD for installation and moved the download version to a backup HDD.
But after that, whenever I tried to re-install (deactivate or not), I couldn't use the CD and had to move all files to the initial location (with all same structures) before I could do anything.
This is extremely annoying since I wish to delete the initial folders for which I used for the initial install (i.e. I created a few folders named "working areaAdobePhotoShopCS3").
I had to create (and remember) all those folders for re-install. Anyone knows any solution for changing this so I can change it to using the CD I burned next time?
I just installed Smoke2013 without a problem! But I accidentally put the media storage in the main OS drive!! I want to use my Raid 0 drive. I unistalled it and delete all the autodesk folders and installed again but the setup program did't ask to use the other drive like the first installation!! It just used the main OS drive as before!!! How can I change the Media drive to another drive? Why when I unistalled Smoke and then re installed It didn't ask to select the media drive?
View 4 Replies View RelatedRight now my default import location is pointing to my c drive and I need it to go to my E drive
View 2 Replies View RelatedThe page numbers in the print module are beyond the edge of the prints my printer generates. Is there any way to change the location of the page number?
View 2 Replies View RelatedI recently had to delete my preferences file and I had forgotten how much I had customized my Photoshop (CS5).Now, however, I can't remember how I changed some of the default settings, such as the location of brushes, gradients, patterns and shapes, that I keep in a central location. Used to be, that if I wanted to replace the brushes, It would open to this location where I actually store all my brushes, not the default location on the C drive.
View 1 Replies View RelatedI'm really enjoying the new Generate feature in Photoshop CC. Any way to change the location where the generated assets are stored.
As you know Generate creates a folder in the same location as your PSD which is logical but I work in a studio where we are collaborating on web projects and it would be ideal if the generated assets were being saved to a web project's image folder instead of the location where we keep our PSD mock-ups.
Is it possible to change the default location for backup files to somewhere other than the folder in which the original file is located? Ideally I would specify a single location for all backups and tell Carbonite and my nightly mirror/sync application not to copy that folder.
View 1 Replies View RelatedI adjust lots and lots of pix for our ebay auctions. Many items have at least 5 pix so they have the same file name but with a 1, 2, 3, 4, etc. at the end of the file name to distinguish them from each other. Example: eapgcompote1.jpg , eapgcompote2.jpg etc..
The problem that I have with Gimp is every time I save/ export a pic Gimp does not save the last export location and last modified date nor does Gimp offer the ability to select from previously saved items like in PhotoShop. I have to go thru about 5 steps in order to save each pic.
Is it possible to change the location of where illustrator looks for scripts, or is it possible to add a location?
View 9 Replies View RelatedMy computers HDD (C:drive)crashed. I have installed a new SSD and totally renewed the installation of my PC including new installation of Lightroom 4.
Luckily I kept my (10.000) photo's ánd LR 4's catalog on D: drive. (And ofcourse also BU on NAS)
Since the new installation the drive that was previously D: is now called F: , I don't know why. D: drive on the new installation is now the DVD- drive
I can restore my catalog but LR4 can't find the photo's. How do I change on all 10.000 photo's te location name from D: to F:???