Just noticed that the Nav Cube is being displayed (I usually keep it turned off as its a bit annoying) but its pointing in an odd way as I'm using the world UCS with no TWISTS or anything.
View 2 RepliesI need to create a cube with the bottom of the cube being flat and then the top being at a slope with all 4 top corners being at different heights, basically I am looking to see if there is a command that let's me drag the corners to where I want it but for the life of me I can't find it
View 9 Replies View RelatedMy navcube is flipped around all funny like.My model is still oriented properly, everything still reads the right way, and the world ucs seems to be fine as well.
View 2 Replies View RelatedIn the previous versions of civil 3d 2012 or earlier, I never had a problem with the view cube not staying pointed to the north. Since I never touched it in the past, how do I get it to stay pointed to the north?
View 7 Replies View RelatedHow to delete the layer "AR-FURN-E" on the attached drawing? Also, there is a circle to the right of the building where if you zoom out, a small dot will appear inside, what is this?
View 2 Replies View RelatedI have a drawing with some 3d objects that I display with multiple viewports, in paper space, showing different views of the objects. The viewports themselves are all on one layer that is frozen. Each viewport with a 3d object is set with Visual style: Hidden & Shade plot: 3D Hidden, to hide all lines that should not display for that view and creating a nice clean image in each viewport.
Again, viewport layer is frozen so no viewport borders are displayed. The problem I'm having is that I get random viewport border lines that show up on my plot. It can be paper or pdf. and could be top in one viewport and side in another, etc. I have never had this happen before but it seems to be related to hiding 3d line because I have never had a problem when I didn't.
When I Save a workspace, I untick Include Open Images. I have always done this. When I save a workspace in X5, the 'Include Open Images' is always ticked. I un-tick it and save the workspace. X5 then asks me if I want to save changes to the open images in the workspace. Why? I click on No, repeated for all the images that are open at this time.
I then click on Save a Workspace again and yes, the Include Open Images is ticked again. In previous versions of PSP this remained unticked until the user ticked it again.
I started a thread on Windows/ Photoshop entitled "CS4 with a high resolution screen". People have replied to this, according to e-mail direct response. However, it is not on the list of forums, and neither does it appear on 'search'.
To repeat: we have a high resolution HP LP 3065 screen, which supports up to 2560 x 1600 pixels. At this resolution, images are still less than print size, but CS4 is essentially unusable because the menu text and other icons do not scale. Does anyone know if it is possible to manage this silly interface to allow the user to see what they are doing? Is there even a visual disability option? Even MS Office 2000 - ten years old - allows "large icons".
It is making me queasy from rotating my model in 3d space. And I don't think my wedges are sitting right...
note: there is no purpose to the model other than to practice mirroring
2d to 3d no cube appears when I click on base view diologe box appears left hand corner that it
View 2 Replies View RelatedAt work one of our computers is running Acad 2009. For some reason the nav. cube only shows if I use a visual style other than 2D Wireframe. With the latter it's gone, and seeing how 2D Wireframe is what I use 90% of the time I really miss the cube! I can't find a solution to this in the nav. cube options.
View 4 Replies View RelatedHow to round the corners on a 3d cube? I need it to resemble a piece of square tube steel.
View 4 Replies View RelatedURL....I have recently started designing a few replacement parts for a motorcycle restoration I am working on and while up to now.I have been working in the 2D space I need to convert a 2D drawing to 3D!
I think I have a list of commands and tools to be used but for the life of me I cannot turn on the VIEW CUBE...I spent about 90 minutes trying last night.I did look in options and it was not visible there?
I have Product Design Suite Premium 2013. In this, the AutoCAD program (with Mechanical loaded or not) at times has an error with a file where the View Cube will move with the zooming (gets larger and smaller) and panning (moves around screent), until I regen (goes back to original position). In addition when it moves, it no longer functions (even if I attempt to click on the screen where it should stay). This is getting quite annoying, because I can't seem to discover the cause. Some CAD files were corrupt, others were not. I just updated the video card driver (ATI Radeon HD 5970 1gb DDR 5), it has no effect.
View 8 Replies View RelatedI am running 2009 SP1 on a 32-bit machine. When I move the mouse in Inventor, the View Cube blinks. This started before installing SP1, but not as often. Now it blinks constantly as I move the mouse. I have re-installed the mouse driver, but that did not work.
View 3 Replies View RelatedI have recently been upgraded to AutoCAD 2011 and have noticed that the Navv Cube is on. I have found by typing in the command NAVVDUBEDISPLY and selecting 0 that this turns it off however it seems to be set to turn back on every existing drawing unless it has been switched off in that drawing and then saved. I didn't use AutoCAD 2010 but have been told that the Navv Cube was turned off unless you selected it to be on. Is there anyway to have toe 2010 option or is this another feature of AutoCAD that they don't want to have changed
View 9 Replies View RelatedHow can i quickly make my view cube operational again? I'm in parallel projection.
View 7 Replies View RelatedIs there a way to change my view cube labels?
View 3 Replies View RelatedThe problem is: the view cube doesn't respond and the navigation pane/tool/group doesn't respond either. If i click on any of the tools it doesn't register in the command line.
The view cube stops working after some amount of time (or clicks) regardless of what I've been doing. If I switch to another drawing the view cube works fine there. If I close the (not working) drawing and open again it works fine.
The views under view work.
How to bring back the little toolbar under the cube in 3D modeling where there is an orbit button and zoom button.
View 1 Replies View RelatedHow to make view cube visible on autocad 2010
View 3 Replies View RelatedIn AutoCAD 2011. After a little bit the view cube stops working. Ill click for ,example, left side, and nothing happens untill i close out and reopen.
I sucks big time when your modeling and you use it constantly while drawing on different axises.
the command to get my view cube to show back up. I tried "cube" and it was defaulted to <on> but it doesnt show up.
View 9 Replies View RelatedI am working with autocad 2013 .. and I want to see the solid history of some cylinder that i subtracted from a cube ... to do that .. i had to open the properties of the object .. and check under "solid history" >> history (record) & "show history" ( = yes )
and it works great ... except that i found out that one some toturials on youtube .. that he press ctrl only to see that ...
if u want to know what iam talking about [URL] ..... (( from 1:33:00 - 1:35:00 )) (( its almost 2 hours vedio ))
its in arabic but ... he mentioned something called "history control".
is there a way to get rid of the ucs icon/view cube thing in the top right corner?
I open up an old drawing with multiple viewports and half of them have this symbol. So I assume that there is a way to turn it off. Again, trying to make computer faster and not have a graphic symbol in all of my viewports.
I print the file and it looks like the View Cube and Navigation Bar print on the page. I print it a second time and I don't see it.
View 5 Replies View RelatedUnder the view cube, in part files, there must be a short ribbon with 3 or 4 view orientation buttons: the navigation bar.It disappeared, how to bring it back?
View 1 Replies View RelatedI drew a cube using polylines by changing ucs. I want to join the polylines so that the cube contour becomes one single object.
Since the lines are in different planes I can not join them. How could I unite those 12 lines so they become a cube non solid(I plan on placing a sphere inside some of the cubes and then use "shade" for visualization so if the cube is solid I won't see the spheres).
I'm running AutoCAD 2012 (base version, but part of Mechanical install). Part of my .mnl file is set to run (command "cube" "off"). On one machine (Windows 7), it works fine. I'm temporarily on my laptop (Windows 8), & that portion no longer works.
If I type cube in the command line, it works fine. However, if I type (command "cube"), it says unknown command "CUBE".
I just installed a student version of Inventor Pro on my comptuer. I have used this and several other similar software packages before. My problem: when I open a new part file, it takes me to a gray screen. No coordinate axes, view cube, nothing. When I click "Create 2D Sketch," still nothing. Same gray screen. If I draw a line, it doesn't show anything.
I've gone to View -> Object Visibility, and everything seems to be checked off as it should be. I've also clicked User Interface, and it shows the View Cube among other things as being selected.
The software didn't prompt me for an activation key, not sure if that may be relevant to the problem?
how to make a large, realistic 3D-ice cube in photoshop?
View 3 Replies View Related