I am wondering if it is possible to have pulldown menus items be brought in on the layer that they were created on versus the layer that your template has current. I created pull down menus and (not thinking ahead) put them all on layer 0. They come in with all the attributes they were created with, but come in on the current layer. Can I change that?
View 7 RepliesI have installed the two service packs hoping to fix this issue. There appears to be a limit to the quantity of items that can be selected if trying to change a property using a pulldown menu. For example, if I select all items in a drawing (say 25,000 items, didn't test the limit), using (CTRL+A) or with mouse, and all items are not the same color, the OBJECT COLOR menu should be blank (have not value) because there is not only one color for the objects. Same would be true of the Layer menu if all objects are not on the same layer. This does not happen, the current Color or Layer are shown in the menu's. WIth the objects selected, changing the color (say from red to green) has no effect. Same is true if trying to assign all selected items to a specific layer. WIth less items selected (didn't test the limit), things work as expected.
I tried to see if the problem was with the menu, so I used the command line commands. Change, Property, Color, with all items selected works fine. Is there a bug with 2011 LT re this? I didn't have this issue using ACAD LT 2008 previously.
why I can't see all the layers in the pull down menu? This doesn't happen with all drawings, but I've noticed this in a recent files.
View 2 Replies View RelatedOn older versions of Acad, I was able to go into the .mnu file and do a macro such as follows:
***POP10
**LIB2
ID_MNLIB2 [&Lib2]
[->Bolts]
[->Bolt ****'y]
[#10]^C^C-insert;F:/STD/LIBS/BOLT-01/BOLT010A;;;;
[* 1/4]^C^C-insert;F:/STD/LIBS/BOLT-01/BOLT025A;;;;
[5/16]^C^C-insert;F:/STD/LIBS/BOLT-01/HH031A;;;;
[*3/8]^C^C-insert;F:/STD/LIBS/BOLT-01/HH038A;;;;
And a new pull down menu would be created and my listing of bolts could be inserted from the std libs bolt file as I clicked through the route. I developed all of this on older versions at a different company. With 2014, I went to the CUSTOMI ZE under the main Drafting and Annotation / AutoCAD Classic pull down and created a New Menu, renamed to BOLTS and then pulled the INSERT command and dropped it ontp the BOLTS pull down and changed the DISPLAY NAME to 1/4" and edited the MACRO from ^C^C _insert to ^C^C_insert;F:/STD/LIBS/BOLT-01/BOLT025A;;;; Seemed to work fine....until I added another 10 bolt assemblies and then noticed that they all showed up as whatever the last bolt I had put in the Macro line was. The display name stayed correct but the insert was gloabally changed on all pull down to whatever the last item was. I have reset 2014 back to the original settings now to clear out everything I had done.
I want to create an iproperty that has a pull down menu where I can make a selection. Can this be done? Can I import this data from a txt, csv, xml file?
View 3 Replies View RelatedI am unable to use pull down menu commands, for example when I want to save as, I have to type it manually in the command menu...to open a file I have to type the file name at command line..
when I click save as or any other command from the pull down menu, it does not work, the command line apprars at the buttom of the drawing asking me to manually make an imput...
Having issue with the layer dialogue box showing not enough layer name. Is it possible to widen it or is that controlled somewhere?
View 1 Replies View RelatedWhere press pull tools and solid history Menu Bar are?
Not in toolbar and Not Ribbon, from Menu bar.
How do I add custom menu items to the main menu in Illustrator?
I would like to build my own menu with scripts that I use alot. This is a powerful feature that I use alot in other programs, but I have not seen any examples of this in illustrator.
All of the sudden, when I go to the pull down menu and click "Save As", instead of the window opening where I can physically choose where I want to save or save over, I get the file directory in the command line. I even typed in the folder directory and it still doesn't save it there. Why the sudden change?
View 3 Replies View RelatedI am trying to create a pull down menu in a door schedule. My goal is that when I load a door family into my model it will generate as much as the required schedule information as possible. Eliminating the need to manually fill out the schedule.
I have already set up shared parameters for typical schedule items; such as door material, door type, frame material, etc. I would like to set up pull down menus for the schedule items that will differ from door to door (fire rating for example), via the door family type parameters. The research I've done seems to point to using nested families. This is something I am not all that familiar with. Do I need to use nested families to do what I'm trying? If so, what would be the best way to do it? How would I create a nested family?
I have a question on the display of the layers in the layer-pulldown. I have a client that is having problems with the display of his layers in the pull-down. They are not in alpha order. When he opened the dialog box they are listed correctly - what can cause this?
View 4 Replies View RelatedI have installed C3D 2013 and only have "Express" available on the menu bar. How can I add all the items to the menu bar?
View 5 Replies View RelatedIn autocad 2013 there was a pull down menu in the layer panel for layer states. 2014 does not have that. How to get that to show up in 2014? I also need the pull down menu for dimension styles.
Unless im missing something it seems like it takes more move to do some basic stuff in 2014.
My menu bar has duplicates of some items such as "edit", "view", etc. How can I access it to remove these duplicates?
View 6 Replies View RelatedI am updating a user to ACADM 2010 from R14. His actual R14 menu was customized so that the menu bar shows 'File' 'Drawings', 'Options', 'Edit', 'View', etc. from left to right. So far I have been able to get the 'Drawings' and 'Options' added to the classic 2010 menu.
However, the 'Drawings' and 'Options' show clear the right of 'Help' (see attachment). I need to get them moved over to a position between 'File' and 'Edit'.
These are drop downs with 5 to 6 levels. Having them on the right makes them look very messy because the cross back and forth.
I've recently installed AutoCAD 2014 and am working to get it compatible with my company's internet standards.
There are some features that are not cool with our IT & Security to have enabled in our office.
I'd like to remove these 3 items from the upper right menu. (see attached image).
The items are...
Sign In to Autodesk 360
Autodesk Exchange Apps
Stay Connected
There are at least two items which I keep clicking inadvertently in the Dimension Drop Down menu:
Ordinate never used it and never will would like to delete
Also Tolerances
Safest way to to remove these items from the Dimension menu.
Trying to setup my machine at home to match my machine at work. To clear things up, I'm running ACA 2009 on both machines, both are running XP Professional, although I'm running XP Professional at home through VMWare Fusion 4 on my MacBook Pro and I really doubt that could cause these issues since a coworker is having these issues at work on a PC.
First of all when I startup ACA 2009 almost everything is missing! When I go to profiles and load the imperial profile I get the wonderful ribbon, which I immediately use RIBBONCLOSE to turn off but then I don't have any file menus. I have the large A in the upper left corner but it only has File, Edit, and Exit I believe. So I used MENULOAD to get the ACAD.cui back up and then reinserted the install CD to add EXPRESSTOOLS back (...why aren't this included to start....that's for another time).
So now I have a something pretty close to my work machine after moving some properties, xref, and tool palettes around. I don't really use any buttons so it is a pretty minimalist desktop. Now down to the real question...
Where did the Project Browser and Style Managers disappear to? I know, I know, ending in a preposition...I can't think anymore today and Autodesk you are responsible. Is it just me or does Autodesk seem to be hiding more and more from us with each release every year? I can type ProjectBrowser into the command line and it will appear but it isn't under the File menu and more and I honestly couldn't find the Style Manager command prompt so I can't tell you if that works.
How do I get these two items to reappear, neither of the two buttons existing either in the standard ACAD.cui configuration next to Tool Palette, etc
Also, why don't the profiles work anymore? If I save it under profiles and reload it the next time everything is messed up nothing happens, and yes the shortcut I use to start ACA references that profile.
code:
Dim Menu As AcadPopupMenuSet Menu = ThisDrawing.Application.MenuGroups.Item(0).Menus.Add("No.")Menu.AddMenuItem Menu.Count + 1, "1", "^C^C_open"Menu.AddMenuItem Menu.Count + 1, "2", "^C^C_open"Menu.AddMenuItem Menu.Count + 1, "3", "^C^C_open"Menu.AddMenuItem Menu.Count + 1, "4", "^C^C_open"
i created a menu called "NO." with 4 items under it "1","2","3","4"
my question is :How can i insert icon for items under this menu?
Whether I used the flyout on the ribbon, the CTRL+1 command, or right click on properties in the menu of a selected item, the properties window does not appear. I tried both repairing and reinstalling AutoCAD and neither worked for me.
View 9 Replies View RelatedShortly around the time I signed in to Autodesk 360 I began to have problems with how I interface with the program. I have AutoCAD LT 2013 and, having used the programs for 20 years, I use the AutoCAD LT Classic format for tools and menus. Also due to how I learned CAD in the early 90s and with many abbreviated commands, I use the keyboard extensively.
1. Certain actions using my mouse have stopped working (i.e. Right-click to edit hatch or blocks). Basically a "recent input" menu comes up each time, showing a short history of my commands.
2. When I click on an object, from the top bar I can no longer edit using the pull downs for Layer, Color, Line Type, etc.
3. I can only edit via the Properties menu or through typing in commands. However when I go to change a setting in the Property menu, the boxes with an ellipsis do not respond at all.
i having a fully working ribbon in ACAD2013. it is a registered dll that is originally coded in vb.net.
unfortunatley the functionality is only visible at the drafting & annotation workspace but is desperatly needed in classic workspace mode.
for hours i am trying to find a way to make my functionality working in classic workspace too.
is it possible to extend the classic workspace in acad2013 with my functions? if so, how, or where can i get more detailed information to solve my task.
I am using CS4 for Mac. My tools and window panels were missing on the side. I placed them back in but noticed something odd happened under the Image tab in the menu bar. Normally I can select from the color modes under Image to change RGB photos to CMYK. For some reason, the CMYK mode is now missing unless I manually select SHOW ALL MENU ITEMS at the bottom of Image - Mode tab. How do I fix it so that all the color modes appear when I go to Mode under the Image tab? This happens every time now when I open a new file. It doesn't seem to save when I quit out of the program. I couldn't find it in Photoshop preferences.
View 2 Replies View RelatedI'm getting all of my menus corrupted after using CS6 for a couple of hours. See below.
.
This is happening for all of my windows (Navigator, preferences, etc.) I have to close the program and re-open to fix.
Running Windows7 64-bit. 12 GB RAM with an ATI FirePro V8700 card with 1 GB on it as well. I have all of the latest drivers for the card (installed yesterday). This should be blazingly fast, and it's chugging along like my CS3 used to with 4 GB RAM. Are these issues with speed and the corruption of the menu items related?
In Photoshop (Mac OS X), I typically use the pattern type cmd+shift+/ to open the help menu, type the phrase of the menu item I want to use, and then hit enter to activate the selected menu item.
I just checked Photoshop CC and the enter key does not seem to correctly behave as it should. Instead of activating the selected menu item, it just dismisses the help menu.
Is there a way to force the enter key to behave correctly, as it does in other apps?
Why are my menu items greyed out until I hit a tool icon?Example .....open Photoshop, click "FILE" = everything greyed out except "recent" whose submenu (list of recent files) greyed out. If I hit any tool icon, menu items appear.ALSO .....eyes on layers have no effect ubtil I click elsewhere, navigator panel empty until I click an increase or decrease there, etc. I need to always click elsewhere for something to happen.I am running Vista Ultimate with a high capacity video card. I removed all my plug-ins, I ran PS4 script-cleaner and re-installed applic 3 times -
View 1 Replies View Relatedresetting itself to factory defaults. Now I notice it has taken to hiding a lot of my menu items and I have to click 'Show all menu items' every time I open a menu. Most frustrating. And I can't find a way to force the blighter to do the decent thing and keep on showing me all the menu options. how to do this as the help files are less than forthcoming.
View 4 Replies View RelatedSo I recently began teaching myself about the Maya program but I have an issue with the tutorials for the 2012 version. It appears as though the tutorial was not updated along with the 2012 Maya program and its menu changes. where the Markings Menu is on the 2012 edition?
View 3 Replies View Related I have a simple clothing pattern I want to make a 3d Texture from which I can do however what I would like to do is make a layer out of the white background around the template with the marked pattern areas as transparent so after I paint the main template clothing ares, I can place the white background with transparent areas back in as a layer to cover where I paint or fill over the marked template area. Is this possible, if so, how?
I am working in CS5 Extended.
Photoshop hides some of the menu items. Often I don't know exactly what I'm looking for and need to be able to see everything. It also restricts the use of keyboard shortcuts. I'd like, for example, to be able to go Alt-I-M-C to change the image to CMYK, but since the CMYK option is hidden it doesn't recognise the last bit and I have to use my mouse.It's a small niggle,
View 3 Replies View Related