We have several people in our firm in and out of drawings. Is there a way to pull an audit trail? of sorts in order to find out who worked on drawing last? Or is this information stored somewhere in the file?
View 4 RepliesI’ve just worked on a series of clients drawing using AutoCad 2009. They are using AutoCad 2013. out of 20 or so drawings several drawings when opening with 2013 open up with Errors requesting recovery is required due to any number of errors ranging from 3 to 7 on average. The error message asks [yes] to recover and it aborts or [no] to continue and the drawing opens ok without further error. If I recover the drawings, and save-as 2013 or other, the same errors appear regardless. However if I open the same drawings using my version of 2009, I didn’t get any errors. The original drawings were compatible with 2009 without conversion.
View 3 Replies View RelatedAny archiving or library tool that would develop a preview contact sheet - JPG, PDF, etc.. of a folder of say 700-1000 basic DWG drawings of manufacturing assemblies (not complex building layouts or anything).
We've got a ton of old drawings that we need to sift through and I don't want to open each one.
I'm thinking there's some 3rd party something.
Basically I've been asked to compile a series of my best work into a collection that our sales guys can take with them as an example of the service we provide to our customers. I'm trying to figure out the easiest way, because I have a pretty big library of 3D drawings.
When I do an actual project, I toss everything into a single .dwg and just print from paper space. I have an AutoLISP script that takes all the paper space layouts and prints them to a single .pdf file with a specific name relative to the project with the current plot time and date.
I could just create a new file Library.dwg and copy/paste all of my past work into it, then make a ton of paper space layouts, but the end result would be gigantic. I'm still running AutoCAD 2013 on a crappy laptop because I won't get the budget for a real rig until the end of the month.
One thought I had was that maybe there's some way to make a viewport in paper space that directs to a model space of an external .dwg, but all of my searches turned up nothing. In fact, now that I think about it, it's driving me nuts that it isn't a feature already. Making a paper space viewport that points to an external .dwg would make my life significantly easier.
One reason I don't want to just go back and print the original pages as they exist is that I want to use the same title block template for all drawings, and mine has evolved over time. I also want to add notes to each page, and I don't want to modify the old drawings at all.
Since i have all kinds of Autodesk products on my computers, i didn't notice this. But a third party programmer (not for CAD) mentioned that IE10 does not open DWGs like its predecessors IE9, IE8 and IE7 did. Is she talking about DWFs or did IE actually read DWG files?
View 8 Replies View RelatedIn autocad 2013 there was a pull down menu in the layer panel for layer states. 2014 does not have that. How to get that to show up in 2014? I also need the pull down menu for dimension styles.
Unless im missing something it seems like it takes more move to do some basic stuff in 2014.
Where press pull tools and solid history Menu Bar are?
Not in toolbar and Not Ribbon, from Menu bar.
in versions of inventor prior to 2013 we were able to quickly and easily refresh a part styles, and thereby obtain the master information for materials, colours and any other style.
i find that now, with the new system of managing materials and appearances that if i need to update a part to reflect the material assests that reside in my materials and appearance library that i have to:
1. open the part, then set the part material to a material other than that i wish to update, then
2. delete the local/ document asset of the material i wish to update, then,
3. assign the material from my material library to the part (to get the library assets to come through to the part).
it seems ridiculous that we have to delete local materials or colours prior to obtaining an updated material or appearance to get the new data into the part.
(the refresh styles command actually appears to be calling in the updates however the updates seem to treat the document assets as the most important. even when managing materials and appearances, the local/document asset seems to take priority over any library asset. again this is different to pre 2013, and is frustratingly slow to work around. all that used to happen in 2012 and prior is we would get a warning that the local style would be overwritten with updated style data = very quick and easy
Mep 2012
I open my file, and a number of .shx files are missing.
I run the audit command and my software locks up.
What is this trying to tell me?
There are some problems while attaching xrefs in Autocad 2013 it shows "eduplicaterecords" error and "Invalid" while attaching manually. But the functionality is working good in Autocad 2012 and below editions of Autocad.
This error is getting resolved when i use "audit" command for Autocad 2013. So i want to customize this command.
This issue begins when I use the "aectoacad"-command.
The file that I get is rather small. Saving the same file after using audit and -purge commands will make it larger, I don't get it.
I've seen a hotfix but I already have the latest update: [URL]
AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit
Having trouble opening a PSD that is a decent file size (500MB)
Is there a tool to scan the file for errors?
When I open ACAD A14, the workspace is displayed black (I had it set on white). When I zoom out, the screen is white again, but when I move the cursor, the crosshairs are displayed as a black square and leave a black trail, like for example Internet Explorer on the old Windows systems. I can use all functions normally, however my drawings are not properly displayed through the black. I had it running today already, without any problems, but my laptop was not connected to the internet, now it is. Things I tried: Reinstalling AutoCAD Restarting my PC Disconnecting my laptop from the internet and reopening AutoCAD A screenshot is attached. I am a first semester student and the plan is for a supporting structure of a hall that is due on friday, so its nothing that takes up a lot of computing power or anything.
View 1 Replies View RelatedI need to create a 3D model of a segment of a jogging path/trail that has a drainage feature called a knick. I pasted a freehand drawing of what a knick looks like below this post. It's a semi-circular area that slopes to one side at a small angle on a trail that is otherwise flat. I need a model of a trail segment with two of these sloping indentations that is just a smooth, gray object- nothing fancy. I managed to create a simple 3D model for a second trail design that has a slope to one side throughout the trail- made a box with a tapered edge and rendered it gray.
Since to my eye a knick looks like a lemon wedge indented into the face of a box- that's what I've been working towards. Made a box, made a cylinder, moved the cylinder so half of its base sits on top of the box face on which I want the indentation, and then used pushpull and subtract to take out a shallow semi-circular cut off the top of the box (did two of these about 20 units apart on the same face).
Here is where I ran into my own limitations. I don't know how to taper the semicircular cut so that it actually slopes off the face to the edge and doesn't look like a clean cut depression. I need it to slope to the edge at a 2% angle. I've tried tapering many times, but I don't think I completely understand the concept of the tapering axis (or rather I know that I completely misunderstand it) because all I end up doing is tapering the various faces of the box and the knick cut stays the same. I also tried out all the tools on the ribbon that look like they can be used for filling in or smoothing edges, but without any luck. Or should I be approaching the process of making the knick from a completely different set of commands?
I had a thought of creating a DWT template containing a bunch of hyperlinks to our job/model directory. The philosophy is that you would start your ACAD session and be presented with a series of links (prepared in the DWT) to various job/drawing directories and models. This would make it easy for the use to simply boot up ACAD, and then they are only 1 or 2 clicks away from accessing their job DWG.
For the most part, setting this up has been pretty easy. But I have a few questions as to ways to smooth out the process even further.
1. Is it possible to remove/disable the hyperlink 'open warning' message when trying to access a DWG via a hyperlink?
2. Is it possible to enable single click access to hyperlinks? This template/launcher DWT will be the only drawing in our office to utilise hyrperlinks, and I would like not to need the CTRL+CLICK to access the linked files/folders. This is of course not a huge issue, but I am curious about it.
3. Is it possible to have a text/attribute tag (containing a FIELD) within a BLOCK to display the path/file name of the hyperlink of the BLOCK. ie. the BLOCK will have the hyperlink, rather than the text within the block being linked. I hope that is clear.I will probably have a few more questions as I progress with this project.
i installed cs4 trail photoshop but when i double click it doesn't open to photoshop it goes to folder,using windows xp.all files are in c drive.
View 2 Replies View RelatedI need to send a drawing to a client but don't want them to be able to edit it, but want them to be able to xref into their drawings.
I have added the dwg to autodesk 360 but it does not show any of the xref files (it has 8 and they are necessary).
I cant seem to work out how to DWF, can you save as dwf in infinite model space or does it always come out as a layout? I would like if I could save it as a dwf and for it to function like a dwg in model space.
I have been sent some drawings with came in 2 zip files. 1 zip contains the floorplans. the other contains the sheets.
if i load the sheet, it will tell me the drawing is missing in a pop up box with a status of "not found". i f i try to attach it nothing happens.
I need to show crisp large format cad drawings in a slide show presentation. Any professional way to do it?
View 4 Replies View RelatedI'm new to AutoCAD and scripting in general with AutoCAD and was looking for some insight.
I need to convert DWGs to Tiff. I have about a million sets of a million DWGs and need to convert different sets at different times.
I'd like to write a script or batch plot type utility that will:
Turn off a layer
Choose monochrome
Save as tiff.
I started looking into the raster function, but to be honest, I'm so green at AutoCAD I'm not even sure if that's the correct direction.
Keep downloading CC installer and it downloads then says Downloading Creative Cloud Desktop in barely enough time to read. No app, no desktop, no application. Does the same thing for trying to download photoshop as well
View 2 Replies View RelatedI just installed the demo version of maya 2012 / 32 bits to test the new editable motion trail that's what I waited for, but I couldn't manipulate the in and out tangents for a specific key they seem to be frozen can't move them.
View 2 Replies View RelatedFor some reason my co-worker has a problem opening my dwgs. When he opens them, he is seeing some layers fade out---only on the Layout's, not the Model. Everything from my Titleblock, to the actual Drawing inside the viewport.
View 9 Replies View RelatedIs it possible to open an AutoCAD LT 2000 drawing in AutoCAD 2012?
View 1 Replies View RelatedI already set up the dst file, but doing this I have just set the dwgs that will be in the sheet list tag. How to set the dwgs that goes into the sheet view and model view? I know that you can have different folders there and organize your dwg files as details, elevations etc.
View 2 Replies View RelatedI'm developing on a W7 64bit machine using VS2010 and AutoCAD 2010. Using COM, I've converted a VBA application into an .exe that runs but it is very slow (much slower then the 32bit VBA code used to run). Since we produce a lot of DXFs out of our 3D application, we want the conversion to be automated (hence, no more running inside of AutoCAD).
The current version just references the AutoCAD 2010 Type Library and the AutoCADObjectdbx COMs.For each DXF, the code does the following:
1. Adds new layers
2. Loops thru all entites (currently using a selectionset)
a. Changes the entity's layer based on a collection key and it's linetype to "bylayer"
b. For PolyLines and LWPolyLines, sets the constantwidth to 0
c. For all Text, changes the style to "SIMPLEX", the Scalefactor to 0.7 and looks for a special text value which indicates the drawing scale ("dscale").
3. Sets the drawing's DIMSCALE and LTSCALE to a multiple of the "dscale"
4. Scales all entities by "dscale"
5. Purges All
6. Zoomextents()
7. Saves the drawing as a *.dwg file
8. Closes the drawing
9. Logs some statistics on each file converted.
It seems as most of the time is spent in Step 2. I can obviously do steps 2,3 & 4 by reading/modifying the DXF as a text file very fast. But I would rather keep all the processing inside of AutoCAD.So here are my questions(based on using COM):
1. What additional references do I need work directly with the drawing's database?
2. Are the NET transaction examples under this category valid when going through COM?
I've zipped and attached the current project (VS2010 project) for possible reference
I have this drawing which has the z axis all over the place.. I believe there is a command that can be used to bring and flatten the entire drawing down to zero Z height, so I can get on with proper 2d interrogation of the drawing.
View 1 Replies View Relatedcreation of a single .DWG file that will be used by a different software program. My current 'base' file is made up of multiple xref's and .DWG files. When I try the 'Save As' option the newly created file shows a blank screen. I tried including the xrefs with no luck.
View 7 Replies View RelatedIs there a way to open more than one acad drawing without having to open multiple acad windows? Sort of like word. You only have one window open and you can toggle between many files.
I have acad 2004.
When I open my template I get 2 drawings, can this be fixed?
View 5 Replies View Relatedmaya 2012 is not showing the timing beads of motion trail.. how could i see the timing beads..
View 3 Replies View Related