There are some problems while attaching xrefs in Autocad 2013 it shows "eduplicaterecords" error and "Invalid" while attaching manually. But the functionality is working good in Autocad 2012 and below editions of Autocad.
This error is getting resolved when i use "audit" command for Autocad 2013. So i want to customize this command.
If I have several hundred drawings, For example;
Drawing1.dwg
Drawing2.dwg
Drawing3.dwg
..etc..
and several hundred Xrefs;
XCdrg1.dwg
XCdrg2.dwg
XCdrg3.dwg
..etc...
Now, I need to do the following;
attach XCdrg1.dwg to Drawing1.dwg
attach XCdrg2.dwg to Drawing2.dwg
attach XCdrg3.dwg to Drawing3.dwg
..etc...
What is the quickest method? Script? (I have approximately 800 drawings and 800 xrefs and for CAD management reasons they need to be individual drawing files)
I have been sent some drawings with came in 2 zip files. 1 zip contains the floorplans. the other contains the sheets.
if i load the sheet, it will tell me the drawing is missing in a pop up box with a status of "not found". i f i try to attach it nothing happens.
i have a large number of drawings that need xrefs detached and re-attached with the latest model xrefs, any way to do them in bulk rather than opening each individual drawing? the problem started a while back, when opening drawings, ACAD is not loading the latest 'saved' model when opening drawings...
View 5 Replies View RelatedMep 2012
I open my file, and a number of .shx files are missing.
I run the audit command and my software locks up.
What is this trying to tell me?
We have several people in our firm in and out of drawings. Is there a way to pull an audit trail? of sorts in order to find out who worked on drawing last? Or is this information stored somewhere in the file?
View 4 Replies View RelatedThis issue begins when I use the "aectoacad"-command.
The file that I get is rather small. Saving the same file after using audit and -purge commands will make it larger, I don't get it.
I've seen a hotfix but I already have the latest update: [URL]
AutoCad 2011 & Civil3D 2011. Product Version 3.
EliteBook 8560w
Intel i7 CPU 2820QM @ 2.3GHz
8 GB RAM
NVIDIA Quadro 1000M
Windows 7 Enterprise 32 Bit
Having trouble opening a PSD that is a decent file size (500MB)
Is there a tool to scan the file for errors?
I’ve just worked on a series of clients drawing using AutoCad 2009. They are using AutoCad 2013. out of 20 or so drawings several drawings when opening with 2013 open up with Errors requesting recovery is required due to any number of errors ranging from 3 to 7 on average. The error message asks [yes] to recover and it aborts or [no] to continue and the drawing opens ok without further error. If I recover the drawings, and save-as 2013 or other, the same errors appear regardless. However if I open the same drawings using my version of 2009, I didn’t get any errors. The original drawings were compatible with 2009 without conversion.
View 3 Replies View RelatedI am trying to take our Traction Power DWG and export it to a DGN which is no problem. The problem i am having arises when i go to attach it to the Track Alignment DGN or the OCS DGN. It says that my drawing is in international feet while the others are in US Survey feet. How can i fix my drawing so that it is in US Survey feet, when i turn it into a DGN.
View 0 Replies View RelatedHow do I go about customizing the Inventor 'Welcome Page'?It looks like a simple enough HTML page in disguise, so I'm assuming it can be customized.
View 4 Replies View RelatedI am using AutoCAD 2011. Because when I typically draw a circle I use the center, diameter style to create a circle. The factory default is Center, Radius. I would like to make the center, diameter my default setting whenever I chose to draw a circle. I would like to know how to make that change then how do I get it onto a custom tool palette?
View 5 Replies View RelatedI am sure this is a setvar that has somehow gotten switched on, but when I copy entities to a point on a line or object, it seems to bind or attach itself to that line/object. So when I try & move or stretch the entity, the line or object that I used as a ref point also moves.
View 1 Replies View RelatedI am preparing 3D model of a 354 acres campus area. I am using AutoCAD Map 3D 2011. I have extruded all the building as AutoCAD drawing objects. I have also imported DEM of the area into AutoCAD. Now, how can I use this DEM to specify the Earth surface elevation or surface profile of my 3D building models so that all my 3D buildings read the Earth surface profile information from DEM.
View 2 Replies View RelatedI know DXF files can be saved as DWGs then used as XREFs but that isn't the goal we want to achieve.
We are a big steel fabrication shop and we run a plasma machine that accepts DXF files. What we want to do is be able to draw our parts as a DXF ready for the plasma then XREF them into an overall drawing to assure all of our pieces line up. Each piece will be a separate DXF.
We want them to be XREFs so that if one needs to be manipulated it can be done on the spot without having to reattach a block. The more files you have to open and manipulate the more room for error.
The only way I can come up with is to draw all pieces as individual DWG files, then XREF each one into their own DXF file as well as XREFing them all into an overall file to check that they all line up.
working in Cad 2012, and used to 'bind' images to the file, but can't find that function. Doing standard details and need to include the images in the file for access on a global drive, so it has to be a self-contained file.
View 6 Replies View RelatedI have a main drawing that I want to pull into another drawing as an XRef. When I try and attach the drawing as an attachment I get then message *Invalid* in the command line.
I have taken the drawings off the network and put them directly on my computer to make sure that it is not a network issue, but I still cannot attach the drawing.
Whenever we use measure tool it will show the a dialog box with valves of x,y,z, delta X, delta Y & delta Z. I want to customize the same as per the attached image.
Customize this, dialog box will not disappear(modal) after entering into any other command so no need to remember the values of x,y....etc.
How can I customize the title block where it says Drawn, Checked and approved?
I want the dates with initials to place automatically. However, I want the date of approval and checked to be 2-5 days after the drawn date. (using Inventor pro. 2012)
I would like to create a pull-down menu so that everyone can select a specific client and have all of the client specific settings be automatically set up like template file location, client block libraries, etc.
We have a lot of users with varying amounts of experience and have had trouble with people using the wrong templates, blocks, etc. Is there a list of key-in commands where I can find what I need to add into the .cuix file? Is there an easier way to set up client standards without forcing users to use a specific workspace?
Customizing the leader style further,I’m not sure if the leader style can be further customized to obtain the style shown in the attached screenshot.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
ACAD 2007. I recently had to reload the stock ACAD 2007 interface.... I would like to customize my right click menu (when selecting any drawing space object) to display only clipboard and properties..... right now, when I right click it displays EVERYTHING!
View 1 Replies View RelatedI'm wondering, to what extent can I customise my shortcut keys on my keyboard? Example, currently AC has "C" set to CIRCLE, and "CO" or "CP" as COPY. Id like to assign "C" to COPY instead as I use it constantly and would work quicker this way. Is it possible?
View 9 Replies View RelatedHow do I attach text to a balloon? For example, I want to add the text "2X" alongside the balloon to denote that there are 2 instances of this part.
I can't believe that you need to make a text box each and every time you need to do this! There has to be a simpler way.
Show me a very simple code-example, how to attach an extension dictionary to an AutoCAD Object and add a XRecord?
View 3 Replies View RelatedWe are moving from 2006 AutoCAD Map to 2013 Map 3D. When I do an overlay of files in 2013 Map 3D which was (X-REF) in 2006 the files don’t align, some do some don’t. I didn’t have that problem in 2006 or any other software. I have tried adding a coordinate system to the file to see if it mattered but it didnt unless I'm doing it wrong. I have just started working with 2013 Map 3D,
View 3 Replies View RelatedI have a group of dimension objects gather up by a selection set (objSS). I can screen each one one of these dimension by the lines
Dim objDimStyle As AcadDimStyle
For Each objDimension In objSS
'
'
Next
How is possible to assign the property Dim Style to each one of my objDimension to an Style that I have already created? I can not find this property available for my objDimension.
I am trying to attach the client details as an xref to my title block. This is how it was done at my previous company, but I did not set that up, so I don't know how it was done.
The problem is this - when I attach the xref, I cannot see it on my page in paper space. If I zoom out as far as possible, the paper layout becomes a tiny dot on the screen. When I then draw a rectangle far to the right of the paper, I see a blue glyph on my paper, so I know that the drawing is there, but I cannot see it (the drawing is inserting very far to the right).
I would like to figure out how to insert my xref so that it shows up on my page. I have moved the information in the file to 0,0 and inserted at 0,0, but I keep having the same problem.
I have an older version of autocad - Autocad LT 2007 - and am trying to attach a dwf I convertedfrom a pdf using design review 2013) in model space. The rectangle of what I imagine is the dwf appears, but there is no content.
View 6 Replies View Relatedi have a little drawing in modelspace. in paperspace, i have a viewport. let's say it's set at 1/4" = 1'-0". everything looks okay so far.
i click on the 'annotate' tab, and then select 'annotative' for my dimension style. it has the little triangle icon thingy so it should be annotative.
i make a couple of simple linear dimensions on my drawing (still in paperspace). looks okay so far.
but now lets say i want to change the scale of my drawing. i change it from 1/4" to 1/2" = 1'-0". my drawing gets bigger, but the dimensions stay the same size and position. they're no longer attached to anything on my drawing.
then i change the scale again, let's say back to 1/4" scale. my drawing shrinks, but as soon as it's back to it's original size, the dimensions now suddenly get twice as big and are where they should have been at 1/2".
and it continues like that, when i change my scale, the dimensions change to whatever the last scale was at, so that they're never synced up.
In the I properties project tab I would like to change the "Stock Number" name to "A.R.M.-PN:". I need to reference 2 part numbers in my IPT I properties. This will then show up on the Parts List as a column which I can add. Or I would like to add a new dialog box to the "Project Tab". Is there a easy way to do this in 2011 Inventor Professional?
View 5 Replies View Related