I want to create 15 instead of 17 viewframes for a portion of the alignment. i played with the dwt file's plan viewport. doesn't matter how big i make the viewport it always create 17 pages. the bigger i make it the more overlap it has.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
is possible to create view frames with an alignment? my drawing is not linear, in fact, its a survey of large lake with bathy survey data, and topo data along the shoreline. is there a function to tell c3d to divide my model into as many sheets required to cover the surface based on the template/layout properties?
View 2 Replies View RelatedI have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies View RelatedI have a dwg I need the viewframes to be 20 scale
Right now I just testing using the default templates, So I'm guessing it has to do with the templates I'm choosing.
C3D 2010
I am using AutoCAD Civil 3d 2012. I have succesfully created a View Frame Group (VFG) from an alignment and then created Plan Profile sheets from that View Frame group. I did create the sheets in a separate file from the View Frame group (that is an option when you create the sheets). It appears that if I change a View Frame using the grips, the corresponding sheet viewport doesn't change based on the edits to the view frame. I must manually update the sheet plan viewport to align with the edited location of the view frame. Is there a way AutoCAD will do this automatically or does it just not do that? Do I have to create the whole sheet set again or can I just recreate that one sheet? I don't want to do that since create the sheet will create a new profile view.
View 2 Replies View RelatedI am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies View RelatedAny way to adjust the placement of my cross sections after i created my view frames? As you can see from the image attached i have extra room on the bottom of my sheet and my first cross section is not completely on the page. Some of my view frames are correct and others are not. Can this be adjusted per sheet?
View 1 Replies View Relatedthere i wanted to know a method to control my view frames range or how to do so in the sheets ,
as per attachment i get the Profile view , out of frame
Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
I have a road design with a corridor. I want to plot the plan and profile but not show the sub-assembly section that are every 25 feet. I can't freeze the layer because then I only see my baseline for the alignment. I want to see the offsets of the road. I have tried creating an offset of my alignment but it will not create the offsets for some reason.
I want my final output to show the entire road over my OG topo survey but do not want to see section lines every 25ft
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
how to create a section view for a pond other than quick view.
View 2 Replies View RelatedHaving a rough time with Pipe Networks! I am working an example from the Mastering C3D book (P. 371) as in the following steps:
1.Clicked SS structure(16)
2.Selected Create Alignment from Network on ribbon
3.Selected last structure(18), hit Enter
4.Changed options as needed in Create Align from Network - Create Profile and Profile View check box: Selected
5.Changed options and clicked Create Profile View
At this point the program pauses, then a dialog box trys to partially fill the screen but is all white then fades away as fast as it appeared and I'm stuck with a paperweight that beeps at me everytime I click the mouse, no panning or zooming response at this time. The command line is prompting me for the profile origin. I can switch to other apps and bring up TM and when I attempt to end C3D then it tells me that it can't because waiting for response. I can then cancel the prompt to save the drawing and C3D exits the active command and control is returned.
[URL]
Civil 3D 2013 SP 1, 64 bit
Dell Precision T5600, 16 GB
Win 7 Professional 64 bit
Intel Xeon @ 2.0 GHz
NVIDIA Quadro 4000
I'm attempting to create a profile view and then modify the label by overriding the text components. Unfortunately the profile view bands don't populate the labels until after my command is complete making it not possible to modify them in one command. Is there a way to update the band to have it show the labels?
Civil 3D 2013
I am trying to create a layout view using the view manager in paperspace. Whenever i click on define window, it does not record any information no matter where i click. If i do the same task in model space, it accepts the window i select. I am currently using civil 3d 2013 with the latest updates.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
Sometimes when I try to create a detail view of an isometric view in my IDW, the "detail full boundary" option is greyed out? Why would this be? If I try an ortho view it works fine.
View 5 Replies View RelatedIs there an easy way to duplicate a single rendered frame to create multiple frames for use in creating a video file?
I have a part of an animation that closes with the client's logo. I'm going to hold the animation on the logo for 5 seconds. So I need to make many copies of the same frame, while keeping the naming sequence of the images proper for use in Video Post.
• Intel i7-975 - 3.33 GHZ
• 24 GB RAM
• Samsung 256 GB - SSD
• NVIDIA GTX 295
• 3ds Max 2013
• Windows 7 - 64 bit
• SpaceMouse Pro
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
is it possible to create a detail view of an Iso view which is created with perspective camera? I tried it but it does not seem to let you have the option of selecting the connection line or detail view boundary?
View 5 Replies View RelatedI'm working on some practice animations, but the issue I've been having is that I don't know how I can work on my inbetweening on a video layer with onion-skinning enabled. I know I could just switch to frame-by-frame animation, but I wanted to have onion-skinning enabled still so that I can make my inbetween animations more acurate.
View 2 Replies View RelatedI have looked at multiple tutorials saying that to create an animated gif in Photoshop CS6, you just open the Timeline palette and select "Create Frames from Layers" from the dropdown. I don't see this option, not even grayed out. What is the problem?
View 2 Replies View RelatedI have a coworker who is converting a Civil 3D drawing down to "plain" AutoCAD.
In the orignal drawing, there are wipeout frames that are turned off, but when you open the converted drawing, they are turned ON.
Is there anyway to ensure the frames will be turned off in the converted drawing without having to open the drawing? I have a theory that the AECTOACAD command must use a particular template file when converting the drawing down, and that it would be a simple matter of making sure the frames are OFF.
why the frame of my text masks are off centered...half off the text. i have to adjust it every time using the wipeout command>frame>on to adjust the frame....then turn the frame off again.
View 6 Replies View RelatedI was wondering if after drawing an alignment, creating a profile, and profile view, is there a way I can mark items along the alignment so they could show up in the profile view. I am laying out a pipeline and want to have the profile display a marker for items such as tees, elbows, reducers and other items. The marker I would like to use will be something like the vertical style grade break markers.
Also on a side note, as each of these items will have a different name, is there a way that I can add these markers and then have each one with a unique name?
1. I had trouble with profile view of the alignment line shown. What step am i missing? Are there things that is turned off?
2. How can I best come up with the right volume to fill.
3. Do I need to learn the grading tools? or could i get buy with a section profile from the alignment. ( it is not even an alignment yet)
4. How to I render a rock fill in this cave-in.
The attached aerial image , has survey or cogo points that are imported to surface, to become surface points. . So I wanted to create a surface profile below and an outline of fill above it. Iideally the side profile would look like a trapezoid, where the base is the surface proile and top would be the design embankment.
But the reason , a surveying crew went down and took shots at the shoreline and a couple shots around the cave-in walls (higher elevation on the cave-in wall cannot be surveyed, although I coud have used a laser , did not) is so that a more accurate volume of the cave in can be obtained. I tried to label how far the road edge is from edge of the cave-in . Norice the higher elevations are the top edge around the cave in area.
The ouline for the embankment will be a mild slope then breaks to a more steep slope. like 4 :1 , then 1.5:1
I created 8 points (4 locations with 2 depths in each location) in the DWG of my AutoCAD Civil 3D 2013 project. I grouped these 8 points into 2 Point Groups: Point Group 1-high depth has Points #1, #3, #5, #7, and Point Group 2-low depth has #2, #4, #6, #8. I changed the 2D Wireframe to 3D Wireframe and on TOP view I saw Point Group 1 is on the top of Point Group 2 (because the 2 Point Groups have the same values of X- and Y-coordinates with different Z(elevation) value - see the first attached file. How can I change the TOP view to the TOP-FRONT view by using some Command to get this fixed TOP-Front view thar has the good separation of the 2 depths as shown in the second attached file?
View 7 Replies View RelatedI was given a horizontal centerline of a 5 mile bike path. We have to stake all the even stationing every 50 feet and all the VPC's and VPT's with vertical elevation. I have created the horizontal profile and also the vertical profile including all the vertical curve information. Is there an easy way to incorporate the elevation information back into the plan view so I can create points that carry x,y & z points that I can transfer out of autocad as a .txt file so we can upload it on our gps equipment?
View 9 Replies View RelatedIs there a way to easily add an object from a profile view to a plan view? I have developed a pipeline profile that has high and low points and I would like to show these points on the plan views.
View 9 Replies View RelatedI have created a simple animation with 6 frames in the gallery. I want to link each individual frame to different websites. So, as the animation on the site is changing, you can click on one frame, and it takes you to one site, or you click on the next frame and it takes you to another site.
View 2 Replies View RelatedI am working on a video piece and I need to mask out a moving figure throughout the entire video, what is the best way to to this? I know that I can import the video frames to layers in CS3 and then create a mask on each frame, but there are thousands of frames - and when I render the video from the animation it is slow to run in quicktime. Even if I were able to edit each frame, it seems like there should be a better way.
View 6 Replies View RelatedHow to create key frames for puppet warp effects in the timeline?
View 2 Replies View Related
