I'm working on some practice animations, but the issue I've been having is that I don't know how I can work on my inbetweening on a video layer with onion-skinning enabled. I know I could just switch to frame-by-frame animation, but I wanted to have onion-skinning enabled still so that I can make my inbetween animations more acurate.
View 2 RepliesI have a sequence contain couple of clips/cuts. I then create a container and save the container in the desktop. What i want to do is to make this container as a 'master' clip so every time i put it into a new sequence, it will create an instance of the master clip. This means everytime i edit the master clip (change edit /trim etc), it will reflect immediatelly in all the instances. Is it possible ? The current implementation, i can only duplicate/copy which then they become disconnected from the 'master' clip. Do i have that options ? This is handy when i want to have managed control of that container.
View 2 Replies View RelatedI'm trying to create an adaptive family (a concrete bleacher/bench) that mitres to its adjoining instances when placed in a project (see attached images).
The family is not acting as I intend it to when loaded into the project (bottom right image). I've created six adaptive points which are intended to correspond to refeence points in the project.
I think the problem has to do with the faces of the extrusion, they don't seem to be able to align to an angled reference plane. How the extrusion can expand/contract in a linear fashion and have ends that mitre adaptively?
I have looked at multiple tutorials saying that to create an animated gif in Photoshop CS6, you just open the Timeline palette and select "Create Frames from Layers" from the dropdown. I don't see this option, not even grayed out. What is the problem?
View 2 Replies View RelatedI am working on a video piece and I need to mask out a moving figure throughout the entire video, what is the best way to to this? I know that I can import the video frames to layers in CS3 and then create a mask on each frame, but there are thousands of frames - and when I render the video from the animation it is slow to run in quicktime. Even if I were able to edit each frame, it seems like there should be a better way.
View 6 Replies View RelatedHow to create key frames for puppet warp effects in the timeline?
View 2 Replies View RelatedI want to create 15 instead of 17 viewframes for a portion of the alignment. i played with the dwt file's plan viewport. doesn't matter how big i make the viewport it always create 17 pages. the bigger i make it the more overlap it has.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
I have created a simple animation with 6 frames in the gallery. I want to link each individual frame to different websites. So, as the animation on the site is changing, you can click on one frame, and it takes you to one site, or you click on the next frame and it takes you to another site.
View 2 Replies View Relatedis possible to create view frames with an alignment? my drawing is not linear, in fact, its a survey of large lake with bathy survey data, and topo data along the shoreline. is there a function to tell c3d to divide my model into as many sheets required to cover the surface based on the template/layout properties?
View 2 Replies View RelatedIs it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
I have a student edition of CS5 installed on 2 Macs for the last year . It is rare that I would use them both together but one evening this week, I did. Since then the eraser tool one on Mac has stopped working, and on the other, the crop has stopped working. Have I triggered some type of licensing issue, or is this a known bug? I had not updated CS5 for a couple of months, prior. I updated it to the latest CS5 downloads today, but with no change?
View 2 Replies View RelatedI have a picture i am restoring. if I could see the original and a zoomed version at the same time.
View 3 Replies View Relatedhow you can select all the instances of a certain colour in a picture.. e.g. If I click a certain shade of grey in my posturized image.. i want PS to show me all the places with the same colour..
View 1 Replies View RelatedCS6 x64 (Windows 7 SP1) keeps loosing OpenCL, requiring I trash my preferences to gte it back. This evening it happened again. I was using Bridge 6, ACR 7.1 Beta and CS6 x64 version and it happened again. Trashed the preferences and even with mutilple reboots would not recognize OpenCL. So being the curious type I did a search for the Pref's file; and found two (2) instances of CS6 x64 preferences, One in the normal place....../Roaming/Adobe/Adobe Photoshop 6/Adobe Photoshop CS6 Settings, then another instance in /Roaming/Adobe/ Adobe Photoshop CS5/Adobe Photoshop CS5 Settings. Trashed this one as well and OPen CL worked again.
Is this normal behavior to have duplicate Pref's for CS6 x64? Probably not, so what is going on? And can confirm that every now and then a duplicate will show up in the CS5 directory, not consistent, and have not yet found the trigger, but one is definitely there.
Apart from OpenCL not working when this happens, everything seems to work normally...
Alright. You may ask why do you need multiple ?
Assume that i have 10000 PSD files in 10 different folders . I have a script that just save as them as PNG. And these files are each 3000x3000 px. My computer has 8 cores and 1 Photoshop exe is only using 1 cpu core. Also i have SSD raid system it has 750 mb read write per second
So right now i am wasting my time with running only 1 Photoshop exe instead of at least 4.
I am running CS6 Cloud Suite under Mountain Lion on a Mac Pro. I have no other versions of Photoshop installed, and I've never HAD any other versions installed on this machine.
The problem is this - when I right-click, say, a JPEG file and choose to open with Photoshop CS6, it will launch Photoshop as expected. But if Photoshop is already launched and I right-click to open, say, a TGA file, it will spawn a completely new instance of Photoshop to open it in. From that point on, with the two instances of photoshop running at the same time, right-clicking and opening any other files will open them in one of the two PS instances.
It's almost like some file types have been associated with one "instance" of PS, and other formats are associated with the other. This seems impossible since there's only ONE install of Photoshop on my computer.
Up until now, I've been using Paint.NET as my main paint program. It worked well enough but had a few specific limitations that forced me to request the company I work for to purchase Photoshop CS2, which they did. In fact, the IT dept just finished installing it.
I'd like to have a single text layer with multiple instances of text, but everytime I go to add additional text, CS2 "conveniently" creates a new layer for me. Is there any way to tell CS2 to "Stop that!" and let me create as many individual instances of text on one layer as I want? I am labeling buildings/roadways on aerial photos and don't need to have 40-50 text layers per photo.
I need to connect to specific instances of AutoCAD and Plant3D. The Running Object Table (ROT) only holds one instance so GetObject wont work.
I've tried getting the correct instance using the hwnd with the AccessibleObjectFromWindow function. I'am thinking the easiest way is to autoload a plugin to communicate with, maybe through a service.
I need to get all Autocad applications objects, not only active one.
I'm writing a program which is checking if XREFS attached to current drawing are not opened in another Autocad instance.
Normaly I can get document collection as follow:
Dim docCol As DocumentCollection = Application.DocumentManager
Is there a way to get an Application object from another Autocad process (acad.exe)?
I wonder if there is something like this:
Spoiler (Highlight to read)Spoiler (Highlight to read)Dim app As Application = GetApplicationFromProcess()
I can find which images are attached to my current drawing with the following code. However, I don't know how to find out how many times they are attached.
Using tr As Transaction = db.TransactionManager.StartTransactionTryDim nod As DBDictionaryDim imageDict As DBDictionaryConsole.WriteLine("Getting ACAD_IMAGE_DICT DB dictionary")nod = CType(tr.GetObject(db.NamedObjectsDictionaryId, OpenMode.ForRead, False), DBDictionary)imageDict =
[Code].....
I have a group made by several objects, and cloned as group instances many times. If i want to add/delete/move an object inside the group, the modifications are not cascaded to other instances. It is possible that this feature does not exist in 3d studio max?
View 3 Replies View RelatedJust want to report that the latest release of Maya 2014 Service Pack 4 still crashes instantly when you try to render any polygon instances. Even cubes and spheres. Worked in 2013.
View 9 Replies View RelatedBackBurner stopped working for me when 3DS Max 2012 came out so my work around was simply opening multiple instances meaning I'd have one "Max" rendering a scene while I worked in another "Max" while at night, having 2-3 simultaneous instances of 2012 rendering out animations. This really came in handy for doing multiple projects at the same time between render scene passes.
I can run 3 stable 3DS Max 2012 on the same machine without a problem, I can even run 1 x 3DS Max 2013 and 3 instances of 2012 at the same time BUT I'm unable to run more than one instance of 2013... it boots-up 2013 but then just hangs and doesn't do anything. I tried using BackBurner but it doesn't work so basically, it seems like I'm stuck running only one instance of 2013 at a time.
Is there a setting somewhere I can enable multiple instances again? I did take a look at Deadline but they don't support 2013 yet.
I'm sure I've seen it here before and have probaly forgotten how to do something that is simple although how do I change an inserted block (A) into block B? i.e. if I select 1000 instances of Block_A I want them to all be converted into Block_B (without editing Block_A) where Block_b is already defined in the CAD file.
View 1 Replies View Relatedusing ACadLT 2008. i'm creating a frame sheet for my firm. i created attributes inside a block. when double clicking, the attribute dialog will lunch and i can type the info, but...
i need instances of the same attribute among the sheet so for example the "date of submission" and the date i keep in the "history" are always the same, i don't want to enter twice the same date.
In a group of mixed objects, would like to change all instances of color X to color Y, including colors of drop shadows.
"Recolor Artwork" isn't working.
As the subject line says, when multiple instances of Inventor are open on the same machine, the addin will only show in the first one. I do not see any errors generated and tried many approaches. I tried to use the ribbon abpannelcontrol
created by the first instance. Or in every subsequent instance of Inventor to delete the existing ribbon abpannelcontrol, and recreate them from scratch. Both approaches did not work.
How do I prevent Inventor from opening files in new Inventor sessions?
If I try to open a file from Windows Explorer or from an email attachment, it opens it up in a brand new Inventor session, even if I already have Inventor open.
If I select two or three files in Windows Explorer or from an attachment to open, it opens them all in individual new Inventor sessions.
I would like to set Inventor (or Windows) so that these files open in the already existing session or at least the same session as each other. I didn't have this problem before upgrading to a new computer and reinstalling.
Pros and cons of using two instances versus two windows? I ahve alignments and corridors in seperate files so I am always using both. Does two instances utilize multi-core processors better?
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I discovered the TXT2MTXT command and how wonderful it is, but there is one thing missing. Is it possible to change multiple texts, but separately WITHOUT having to re-issue the command? I've experimented with some of the in command options, but unless I'm missing something, nothing seems to work.
Preferably, I would like it to work like the FILLET -> Multiple command, so I could select a group of texts, convert them then select another group etc, but the 'multiple' option in TXT2MTXT does not work in such a way.
I would like to know if it is possible to have a single attribute fill multiple strings of text. I have text that appears in more than one spot in a block of mine but when inserting the block i would like to be prompted once to fill the attribute.
View 1 Replies View Related