AutoCAD Civil 3D :: Updating Sheets From View Frames
Dec 17, 2013
I am using AutoCAD Civil 3d 2012. I have succesfully created a View Frame Group (VFG) from an alignment and then created Plan Profile sheets from that View Frame group. I did create the sheets in a separate file from the View Frame group (that is an option when you create the sheets). It appears that if I change a View Frame using the grips, the corresponding sheet viewport doesn't change based on the edits to the view frame. I must manually update the sheet plan viewport to align with the edited location of the view frame. Is there a way AutoCAD will do this automatically or does it just not do that? Do I have to create the whole sheet set again or can I just recreate that one sheet? I don't want to do that since create the sheet will create a new profile view.
View 2 Replies
ADVERTISEMENT
Aug 8, 2012
there i wanted to know a method to control my view frames range or how to do so in the sheets ,
as per attachment i get the Profile view , out of frame
Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 3 Replies
View Related
Aug 26, 2013
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies
View Related
Mar 29, 2012
I have a dwg I need the viewframes to be 20 scale
Right now I just testing using the default templates, So I'm guessing it has to do with the templates I'm choosing.
C3D 2010
View 1 Replies
View Related
Sep 12, 2012
I want to create 15 instead of 17 viewframes for a portion of the alignment. i played with the dwt file's plan viewport. doesn't matter how big i make the viewport it always create 17 pages. the bigger i make it the more overlap it has.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 1 Replies
View Related
May 3, 2013
When creating plan and profile sheets with multiple alignments in the view, what is a common practice in civil 3d?
- Data shortcut all alignments that are in the view into the plan and profile model
- Create a dwg that has all the alignments data shortcutted and xref that into the plan and profile dwg
- Create a dwg for each alignment and xref into an overall alignment dwg via attach and then xref the overall into the pp sheets dwg model.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
View 2 Replies
View Related
Jun 19, 2013
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
View 2 Replies
View Related
Nov 26, 2013
is possible to create view frames with an alignment? my drawing is not linear, in fact, its a survey of large lake with bathy survey data, and topo data along the shoreline. is there a function to tell c3d to divide my model into as many sheets required to cover the surface based on the template/layout properties?
View 2 Replies
View Related
Jan 10, 2013
I new to using the view frame groups we do allot of double plan view 11x17 sheets using an alignment on top of MrSid aerial drawings. It is very time consuming to setup the viewports along the alignment doing the old fashion method of copying the page setup and sliding the model space along the alignment for the next sheet. I understand the plan profile and cross section methods of creating multiple sheets and how the viewframe group works for those type of sheets. I'm just not sure how to create a dwt template for one plan view on top of another plan on the same sheet with to viewports. I know I'm not the only person that creates road cl double planviews when your not concerned about a profile.
View 3 Replies
View Related
Nov 22, 2013
I am setting different cut and fill shapes for different material and it keeps plotting the same patterns. I check the material table and the section view display tab for the shape and it all looks correct. for now I went through them manually selecting the fill shape and changin it.
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
View 7 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Apr 4, 2013
Any way to adjust the placement of my cross sections after i created my view frames? As you can see from the image attached i have extra room on the bottom of my sheet and my first cross section is not completely on the page. Some of my view frames are correct and others are not. Can this be adjusted per sheet?
View 1 Replies
View Related
Jun 19, 2013
I have a road design with a corridor. I want to plot the plan and profile but not show the sub-assembly section that are every 25 feet. I can't freeze the layer because then I only see my baseline for the alignment. I want to see the offsets of the road. I have tried creating an offset of my alignment but it will not create the offsets for some reason.
I want my final output to show the entire road over my OG topo survey but do not want to see section lines every 25ft
View 1 Replies
View Related
Mar 1, 2012
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
View 4 Replies
View Related
Nov 21, 2011
In fact, some of the things I've found online refer that you cannot automatically replace entire Titleblock Templates for existing Sheets in the Sheet Set Manager. So, here's my question:
Can you replace all existing Sheets in a Sheet Set with an entirely new Template file automatically, without opening each Sheet and re-inserting the Title block?
Example:
Let's say I have a Sheet Set. Inside the Sheet Set, I already have 20 sheets created. I then realize that my Template file is missing our company logo. I then have to open the Template file and insert my company logo. Well, this works for all newly created sheets from that point forward, but how can I get this change to automatically populate in the existing 20 Sheets that are already in the Sheet Set?
View 9 Replies
View Related
Aug 13, 2012
Any intelligent way of referencing the sheet with the parent view? E.g. i put a detail or section view on Sheet 2 from a parent view on Sheet 1 and want to reference from what sheet the view is taken from.
View 3 Replies
View Related
Oct 24, 2012
I am having an issue with my template that I created from an old drawing: the quick view layout thumbnail still shows the old drawing in model space. All of the paper space thumbnails update themselves as I work, however model space does not. It shows the old drawing both when I hover over the model space tab, and also when I pull up all of my quick view layouts. I am using AutoCAD 2009
View 4 Replies
View Related
Dec 18, 2012
I have created a big and complex Revit model, in Revit 2013. It's now time for me to print the sheets - I want them in PDF and DWF. But I really have some problems doing that. When I print to PDF it takes about 20 minutes for it to print 1 drawing - and it will not be complete - elements are missing compared to the original view. Often Revit stops working - and it's the same story when I try to save a DWF.
I think the reason why I have the problem is because of the complexity of the building's geometry. Have modeled it by importing SAT. files from Rhino - to create the form. The result is great but the file is now 370 Mb. I'm trying to link the model in to a new Revit project to minimize the file, and hopefully get the drawings printed in PDF and DWF. In the the new project I can't see the sheets from the linked file though.
Is there a way to link the sheets to another procjet?
View 1 Replies
View Related
Jul 8, 2011
If I have several sheets of several floors, and I want the views in each sheet to be positioned at exactly the same position. How do I best accomplish that?
You can use the "Guide Grid" to place the views on a sheet. Then you can align the view (using the grid lines) to this guide grid. In the other sheets, you can use again the same guide grid, just select the guide grid name in the properties of the sheet.
Additional information about guide grid is available in the Revit help, search for "Aligning views on a sheet" or "Guide Grid".
View 6 Replies
View Related
Jan 4, 2012
Is it possible link one view into multiple sheets? I would like one key plan to appear in all of the plan sheets.
View 6 Replies
View Related
Jun 14, 2012
shouldn't sheets marked as "exclude from count" not be counted?
I tried this in both 2013 and 2012 to see if maybe AutoDesk broke it, but it doesn't work in either one. This is easily reproducible for me, a file shouldn't be necessary. Just open up (or create) a multi sheet drawing. Go to edit sheet on one or two of them and check the "exclude form count" box. Now create a new iLogic rule and put the following line into it:
MsgBox("This is the number of sheets in the drawing: " & ThisDoc.Document.Sheets.Count, VBOkOnly, "Number of Sheets")
View 2 Replies
View Related
May 25, 2012
The most annoying in the style sheets, view manager since x3 is still existed in the x6 as style sheet sets having unnecessary styles which i have not created besides color styles & view manager as well. Are they not considered anyhow ?
Default style set is ok and Styles is also ok to create our own but Why this nuisance of style sets which are having a lot of dump. Truly view manager is unnecessary docker i think but have lots of zoomed data.
View 5 Replies
View Related
Dec 29, 2011
I updated to lightroom 3.6, I no longer have grid view when importing photos.
View 8 Replies
View Related
Mar 5, 2013
I'm having an issue when trying to create the profile sheets on my first Civil 3D project. I'm supposed to use a horizontal scale of 1/2000 and a vertical scale of 1/400. When producing the sheets, I obtain 1/500 H and 1/100 V.
View 2 Replies
View Related
Mar 18, 2013
I created plan and profile sheets using the P&P tools. Then I created a new drawing and attached (XREF) the dwg with the viewframes in it. Then I set the viewframe layer to Plot instead of non-plot and I changed the color so that it would be heavy (we use CTB).
Then when I went to my PSPACE layout to try and plot, the viewframes are NOT there. The layer IS turned on, because there's a PLINE that I drew on that layer and it DOES show up. When in modelspace, the viewframes are there and the color did change as expected.
So why do they disappear when I'm on the layout tab?
The goal is to create a plottable sheet that identifies where each sheet is (I want to point to each viewframe and lable them C-101, C-102 etc).
View 3 Replies
View Related
Dec 10, 2013
I am creating P&P sheets for my road. I created view frames, and when I got to create sheets, I pick "all layouts in new drawing". I go to open the new drawing up, but all that shows up/tranfers is the profile and alignment, nothing else comes over ( proposed linework, existing linework, etc.)??????
View 4 Replies
View Related
Oct 1, 2010
i have an assembly with 100+ parts that i have to show in my parts list.
my question is :
how can i add identical sheets showing identical view of the assembly but the ist page will show the first 50 parts and the second page will show the rest of the part list?
inventor 2011
vault 2011
View 6 Replies
View Related
Mar 13, 2012
I am creating plan sheets and using the sheet creation tool. The plan sheets I am looking to make have stacked view, similar to a plan and profile sheet, only they have the horizontal alignment in both views.
I have a template set up with two viewports, but when I try to create the sheets it puts the same view frame in both of the viewports. Is there any way to set this template up so that I can have, lets say, STA 100+00 - 110+00 in the top viewport and then STA 110+00 - 120+00 in the bottom viewport. I understand that I can move the viewports once they are created, but I would rather have that done automatically. I am not sure if what I want done is possible with Civil 3D.
View 3 Replies
View Related
Jun 17, 2013
So I had to jump into the middle of a project. The Viewframes were already created but when I go to the plan and profile sheets for the viewframes the profile is not showing and I'm not sure how to choose the correct profile and display it in the corresponding plan and profile sheet.
View 8 Replies
View Related
Mar 29, 2012
I have created section sheets in C3D 2012. My sections look fine in model space and my template comes in in paper space with my template and the proper viewport (viewport scale is 1:200). My annotation scale in model space is 1:250 and everything looks fine. My problem is, in paper space, the sections themselves looks fine but the annotation is way out to lunch (see attachment). I've tried playing with the scales but can't seem to find a solution.
View 1 Replies
View Related
Apr 26, 2012
On the side of sheets created with the Create Sheets command there is a grey area that masks out the referenced files at the match line. Is there a way to reproduce this without having View Frames and using the Create Sheets? In other words, I a manually creating these plan sheets and I wonder if there is a better way of masking than using wipeout on the sheet tabs.
Windows 7 x 64
Nvidia GeForce GTS 450
8 GB Ram
Intel Core i5-2310 @ 2.90 GHz
v. F.107.0.0 AutoCAD Civil 3D 2012 SP1
View 3 Replies
View Related
