3ds Max :: Duplicate Rendered Frames For Static View Of Logo
Mar 29, 2013
Is there an easy way to duplicate a single rendered frame to create multiple frames for use in creating a video file?
I have a part of an animation that closes with the client's logo. I'm going to hold the animation on the logo for 5 seconds. So I need to make many copies of the same frame, while keeping the naming sequence of the images proper for use in Video Post.
• Intel i7-975 - 3.33 GHZ
• 24 GB RAM
• Samsung 256 GB - SSD
• NVIDIA GTX 295
• 3ds Max 2013
• Windows 7 - 64 bit
• SpaceMouse Pro
View 1 Replies
ADVERTISEMENT
Jun 28, 2011
I'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
View 8 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
Mar 18, 2011
I am doing a rendering of a timeline with approx 1900 frames. I am using mental ray as my render engine. After the rendering runs its course, approx 20 hours, it completes with no problems. I open the saved avi file and the clip only captures the first say half of the rendered frames. I have done this 3 times now and for what should be approx a 60 sec clip i only get 36 sec.
View 4 Replies
View Related
Nov 13, 2012
I down loaded a movie from a COOLPIX AW100 camera to PRO X4, it is a *.mov file, in AVC, MPG4, 29.97 frames/sec format.
When I ran it, it appeared to be jumpy, so I when went frame by frame, I noticed there were duplicate frames at the points were the hesitation occurred.
I have no problems with my FZ100 clips in H246/MPG4 .
A strange thing happens when I view it in WINDOWS MEDIA PLAYER, it has NO duplicate frames, and appears smooth.
View 14 Replies
View Related
Oct 28, 2011
Windows XP/Sp3 - Gimp 2.6.10 - Gap 2.6
I readily admit that I have another thread open where I mention this issue. However, that thread mainly addresses another issue. The problem that I address, here, is holding up progress on the other and I believe it to be unique enough to warrant an independent thread.Here's what is going on:
-I am attempting to have text travel along a path.
-I am using the proper procedure to save the background frame as _000001. and duplicating way more frames than I am using path points.
-I am using the proper procedure to create my text letters in a separate source image.xcf file.
-My RGB settings match up.
-I am activating the background layer in _00001.
-I am using the proper move path procedures and operator settings.
-My From and To frame assignments are less than the number of frames.
-Whenever I Refresh, or OK, the move path function, I get a Move Path Message stating the selected path points are different than the number of frames and I either need to adjust the number of path points I am using, or change the number of frames.
I have spent hours researching this. The only two issues I see mentioned are to make sure that the RGB's match up and that I am using the background layer of the _00001 file.I see that there was a patch for this condition on early versions of Gimp/Gap. I wonder if it could be reoccurring.
View 5 Replies
View Related
Aug 26, 2013
I have been creating directly the DWG of AutoCAD Civil 3D 2013 for a couple of months.I created a project for the 8 points (4 locations with 2 depths in each location - i. e. same XY-coordinates, but different Z) And I just cannot separate the 2 "depth" points of the "same XY-coordinates" location in the 3D Wireframe by using the 3D Rotation Cube. I wonder I should start the C3D 2013 with choosing the right Template, configuring proper Viewports and creating suitable View Frames. I don't know what Template is right for my project of the 2 "depth" points of the same location in the 3D Wireframe of C3D 2013 - see the attached file. what Template (.dwt) is right for my project, how to cofigure 2 or 3 Viewports, and create the View Frames.
View 1 Replies
View Related
Sep 5, 2011
After I have created the whole 3D image using autodesk 3ds max, there is an option to view it at any angle like front,left,right etc. or I can view at any random angle by using the mouse. But how do I view the rendering at a particular angle like 15degree or any angle specified by me. I am an amateur in using autodesk.
View 4 Replies
View Related
Nov 5, 2013
I have a bit of problem that've been cracking my head. I create a wires, segments using cable harness environments in Inventor. After I created those, I want to see rendered image, but only centerlines appears. I have already change the harness settings into real image(rendered) but still centerlines appears.
Weird thing is that I create other assembly, it all works perfectly. But I cannot recreate my design, it is already so much work.
View 8 Replies
View Related
Jun 13, 2012
I am having a problem with a view being shown rendered.
I have a tall piece of material handling equipment that is drawn to scale and is approximately 30' tall. When I render the view and take a shot of it, it looks angled based on the camera angle, when in reality it should appear straight (see attached picture).
How do I get this to look correctly?
View 3 Replies
View Related
Dec 20, 2012
I ran some rendereings using revit 2013 , and windows 8 . But everytime I render a view I get a horizontal white area in the background that looks like a white fence.
I attached a rendered view ( draft quality) and a realistic view . you can see the white area in the background in both images.
View 1 Replies
View Related
Apr 4, 2013
When I duplicate a view with details, and the original view has already issued revisions, the duplicated view gets these revisions too. But the view is not place on a sheet.
Still after copying I cannot delete the revisions or the view anymore, Revit says:
So what to do? Duplicate view without detailing and copy past detailing (without revisions) or is there something i am missing?
View 1 Replies
View Related
Mar 29, 2012
I have a dwg I need the viewframes to be 20 scale
Right now I just testing using the default templates, So I'm guessing it has to do with the templates I'm choosing.
C3D 2010
View 1 Replies
View Related
Sep 12, 2012
I want to create 15 instead of 17 viewframes for a portion of the alignment. i played with the dwt file's plan viewport. doesn't matter how big i make the viewport it always create 17 pages. the bigger i make it the more overlap it has.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 1 Replies
View Related
Dec 17, 2013
I am using AutoCAD Civil 3d 2012. I have succesfully created a View Frame Group (VFG) from an alignment and then created Plan Profile sheets from that View Frame group. I did create the sheets in a separate file from the View Frame group (that is an option when you create the sheets). It appears that if I change a View Frame using the grips, the corresponding sheet viewport doesn't change based on the edits to the view frame. I must manually update the sheet plan viewport to align with the edited location of the view frame. Is there a way AutoCAD will do this automatically or does it just not do that? Do I have to create the whole sheet set again or can I just recreate that one sheet? I don't want to do that since create the sheet will create a new profile view.
View 2 Replies
View Related
Jun 19, 2013
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
View 2 Replies
View Related
Nov 26, 2013
is possible to create view frames with an alignment? my drawing is not linear, in fact, its a survey of large lake with bathy survey data, and topo data along the shoreline. is there a function to tell c3d to divide my model into as many sheets required to cover the surface based on the template/layout properties?
View 2 Replies
View Related
Jan 11, 2014
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies
View Related
Apr 4, 2013
Any way to adjust the placement of my cross sections after i created my view frames? As you can see from the image attached i have extra room on the bottom of my sheet and my first cross section is not completely on the page. Some of my view frames are correct and others are not. Can this be adjusted per sheet?
View 1 Replies
View Related
Aug 8, 2012
there i wanted to know a method to control my view frames range or how to do so in the sheets ,
as per attachment i get the Profile view , out of frame
Yeah Will Not that much :
Sony VPCCW26FA
Intel Core i5 M 520 @ 2.40GHz
8192MB RAM
NVIDIA GeForce GT 330M 512MB Dedicated
View 3 Replies
View Related
Jun 19, 2013
I have a road design with a corridor. I want to plot the plan and profile but not show the sub-assembly section that are every 25 feet. I can't freeze the layer because then I only see my baseline for the alignment. I want to see the offsets of the road. I have tried creating an offset of my alignment but it will not create the offsets for some reason.
I want my final output to show the entire road over my OG topo survey but do not want to see section lines every 25ft
View 1 Replies
View Related
Mar 1, 2012
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
View 4 Replies
View Related
Jul 13, 2012
Currently running the student version of 3ds Max Design 2012 in Win 7 as a virtual machine through Parallels 7, on a MacBook Pro OSX 10.7.
Yesterday when I opened 3DS Max Design I received the screen in the first image below. I have uninstalled and reinstalled Max, uninstalled and reinstalled Parallels, to no avail. If I maximize the viewport (ALT+W), I am able to see wire frames of the top, front, and side without distortion, however if I toggle to Smooth & Highlights (F3) in any of the viewports I get the same static-y screen as in the perspective viewport (see second image below).
Four days ago I did upgrade my machine with an SSD and 8 gigs of RAM, but since the upgrades I have been able to use 3DS Max Design without any issues, until yesterday.
View 5 Replies
View Related
Jan 7, 2013
is it possible our cad 2012 or 2013 have "static label" option like on land desktop?? or any vlx or lisp for "add static labels"
View 7 Replies
View Related
Oct 11, 2013
Is there anyway to drop a pin, or a point on a specific place in photoshop and have it display those coordinates instead of where the mouse is?
It is very hard having to copy and paste coordinates when they change constantly.
View 1 Replies
View Related
Apr 12, 2013
I filmed a presentation where most of the content was slides scanned from old books and catalogs. To improve view ability I took the presenter's power points, wrote them to .pdf and then individually scaled them in Photoshop. I then went into to each slide and saved the individual images as separate images (he had them all in .jpeg so I am stuck with that). It didn't look bad inside premiere but once I export it to an .mp4 the old images with lots of lines tend to crawl and its quite distracting. You did a little test video on the first slide:
[URL].......
The best way to stop this before I jump into editing. I don't have access to the original documents--just the scans that were embedded in the slides. Also since there are 80 slides.
View 5 Replies
View Related
Mar 4, 2012
I have a sound track with an unacceptable amount of static and white noise in the audio. filtering out background noise? Options in VS X4?
View 1 Replies
View Related
Aug 28, 2013
I have never attempted any i-logic before and this may be running before I can walk, but I was wondering if this premise even sounded do-able. I would like to create a rule to set the last row of my revision table to all static values, and then add a row.
View 5 Replies
View Related
Jun 2, 2013
I have a static curve in Maya and I would like to export the coordinates of the control points in a file that can be read in Matlab. This operation must be done several times so I would like to do it using a batch file and by making a link between maya and Matlab.How can I do it?
View 1 Replies
View Related
Aug 1, 2013
I tried doing the pen tool frame by frame but it degrades the image. I tried doing a gain reducting but all it does is blur features and not even remove the rain. I looked up a computer science journal that gave a method with K-means clustering but I don't know how to apply it to AE..
View 5 Replies
View Related
Nov 18, 2013
I could design and build this project in my sleep in Fireworks. I use Photoshop for retouching, not design.
Anyway, my client wants the files delivered in Photoshop, so I am working in PS CC.
I have sliced my image up and one part is an animated GIF and the rest should be static GIFs. I cannot for the life of me figure out how to assign animation vs static for slices. Everything is animated. How do I assign a slice to be static. In Fireworks you can choose GIF or Animated GIF. Simple.
View 4 Replies
View Related
