Is there anyway to drop a pin, or a point on a specific place in photoshop and have it display those coordinates instead of where the mouse is?
It is very hard having to copy and paste coordinates when they change constantly.
I have a static curve in Maya and I would like to export the coordinates of the control points in a file that can be read in Matlab. This operation must be done several times so I would like to do it using a batch file and by making a link between maya and Matlab.How can I do it?
View 1 Replies View Relatedi am trying to translate a Point coordinates from Paperspce to world coordinates in model space.The code i used in Land2006 worked OK but now in Civil3d 2012 it doesn't!
Private Sub GetPlais_Click()
Dim tmpnt1 As Variant, tmpnt2 As Variant, tmpPnt1 As Variant
Dim lole(0 To 2) As Double, upri(0 To 2) As Double
Dim returnobj As AcadObject
FrmGrid3.Hide
On Error GoTo Eline
ThisDrawing.Utility.GetEntity returnobj, tmpPnt1, "ÅðÝëåîå ôï ViewPort ðïõ èá äçìéïõñãçèåß ï êÜíáâïò!"
If TypeOf returnobj Is IAcadPViewport Then
[code]........
I'm a GIS analyst trying to learn Cad. I'd like to place a single point in autocad model space at a specific Northing/Easting position. After reading several forum threads I don't think CAD allows me to change the coordinate system of model space from map coords to northing easting coords, as we can in GIS.
View 5 Replies View RelatedThe coordinates that we can apply in Revit (project/shared) aren't exactly the same to have real world projection coordinates (WGS84)??
If not how can we convert the revit shared coordinates to real world projection coordinates?
I filmed a presentation where most of the content was slides scanned from old books and catalogs. To improve view ability I took the presenter's power points, wrote them to .pdf and then individually scaled them in Photoshop. I then went into to each slide and saved the individual images as separate images (he had them all in .jpeg so I am stuck with that). It didn't look bad inside premiere but once I export it to an .mp4 the old images with lots of lines tend to crawl and its quite distracting. You did a little test video on the first slide:
[URL].......
The best way to stop this before I jump into editing. I don't have access to the original documents--just the scans that were embedded in the slides. Also since there are 80 slides.
I could design and build this project in my sleep in Fireworks. I use Photoshop for retouching, not design.
Anyway, my client wants the files delivered in Photoshop, so I am working in PS CC.
I have sliced my image up and one part is an animated GIF and the rest should be static GIFs. I cannot for the life of me figure out how to assign animation vs static for slices. Everything is animated. How do I assign a slice to be static. In Fireworks you can choose GIF or Animated GIF. Simple.
Where is the feature that allowed images to be merged while removing non-static elements. I saw a demonstration of removing people from a scene when multiple pictures were taken and the people had changed their positions. This was touted as a feature found only in PS extended a few years ago. I have never been able to locate it.
View 2 Replies View RelatedCurrently running the student version of 3ds Max Design 2012 in Win 7 as a virtual machine through Parallels 7, on a MacBook Pro OSX 10.7.
Yesterday when I opened 3DS Max Design I received the screen in the first image below. I have uninstalled and reinstalled Max, uninstalled and reinstalled Parallels, to no avail. If I maximize the viewport (ALT+W), I am able to see wire frames of the top, front, and side without distortion, however if I toggle to Smooth & Highlights (F3) in any of the viewports I get the same static-y screen as in the perspective viewport (see second image below).
Four days ago I did upgrade my machine with an SSD and 8 gigs of RAM, but since the upgrades I have been able to use 3DS Max Design without any issues, until yesterday.
is it possible our cad 2012 or 2013 have "static label" option like on land desktop?? or any vlx or lisp for "add static labels"
View 7 Replies View RelatedI have a sound track with an unacceptable amount of static and white noise in the audio. filtering out background noise? Options in VS X4?
View 1 Replies View RelatedI have never attempted any i-logic before and this may be running before I can walk, but I was wondering if this premise even sounded do-able. I would like to create a rule to set the last row of my revision table to all static values, and then add a row.
View 5 Replies View RelatedI tried doing the pen tool frame by frame but it degrades the image. I tried doing a gain reducting but all it does is blur features and not even remove the rain. I looked up a computer science journal that gave a method with K-means clustering but I don't know how to apply it to AE..
View 5 Replies View RelatedSpent all night working on a more complex "test" of V4 and it appears I ran into an overlay brick wall. My last component is a series of 6 social media-like icons and I only have two overlay tracks. It appears that I can select a group of images to drag to an overlay track but they are applied sequentially. I need them to persist to the end of the video.
Is there a way to layer static images? I see that with shapes and titles I can go hog wild in one overlay.
how can i reduce the poly count of a static mesh I made. I am attaching a screen shot of it. Rather than re-modelling the mesh or re-topologizing what can i do to reduce the poly count??
View 2 Replies View RelatedIs there an easy way to duplicate a single rendered frame to create multiple frames for use in creating a video file?
I have a part of an animation that closes with the client's logo. I'm going to hold the animation on the logo for 5 seconds. So I need to make many copies of the same frame, while keeping the naming sequence of the images proper for use in Video Post.
• Intel i7-975 - 3.33 GHZ
• 24 GB RAM
• Samsung 256 GB - SSD
• NVIDIA GTX 295
• 3ds Max 2013
• Windows 7 - 64 bit
• SpaceMouse Pro
I have the following image. This is for schools as a fundraiser product/promo product.
What i have in green is the text box. I want it to adjust the text height and width itself depending on how much text is in the box while keeping a universal textbox size. Is there a way to do that?
it is possible to create the effect of people talking in a static picture.
In Adobe after effects I believe this is done by masking off the mouth, adding a second layer in that contains a video of someone's lips moving, and then blending the join between the two layer ... it is possible to create the same sort of effect in VS Pro X4.
i have a user is complaining that his mtext tool bar is always static, always in the same area (in the centre of the screen)
where when i did the test on my autocad it is dynamic (appear on the top of my mtext)
is there a variable i can change or an option somewhere in the cui i could edited and make it dynamic
myMacro.zip
Well here's a final overview of everything we did. Mouth is now dry from all the talkin'....Miller time!
I hope you enjoyed this lesson. The gms file is attached to this post also.
You will want to see parts 1-4 first if you haven't already:
Part 1 | Part 2 | Part 3 | Part 4
(PS Video size id 720pxX525px and may get cut off by the forum. Hopefully you can save it or view entire size)
cs_setInnerHtml('video_a67025bf-ffef-4d99-aa88-eb8b1396619e','');
how would i add a static offset to the both the northing and easting to all my points? i need to add 3.02 feet to the northing and 0.56 feet to the easting. elevation is good, but the positions all need to be shifted.
View 7 Replies View RelatedI'm using Autocad 2004 with LDD. My text style is set to Standard with simplex.shx as my font. When I select add static labels and select a line, the label is gibberish. I have tried different fonts but have the same results, gibberish.
View 5 Replies View RelatedI am using Inventor 2014 to do a simple stress analysis.
I am looking for the reaction forces at fixed boundaries, but I can't find how I can get them. Displacement, stresses, strains, everything works, but where are reaction forces?
I've to put the sections on static mode on my project 'cuz the surface corridor won't creating right, can i transport the informations of the static section to the surface and profile? Basically i'm trying to change the informations on the static section and actualizing my surface and profile using the section changes
View 3 Replies View Relatedin civil 3d 2013 i have a existing surface, alignment, and profile that is data linked into another drawing when i create a profile view from the profile data link when i get to the profile display options under update mode it shows as beening static, i don't want it to be static i want it to be dynamic. is there a way or setting that will let me change that to static? we show the existing grade as hidden but with the static option set the grade shows up with long and short.
View 5 Replies View RelatedI have just been doing some work for a company and they were using AutoCAD 2009.
One of my tasks involved stretching and moving items from imported drawings over Architectural layouts. Lines drawn on the x and y axis were fine. However, if I zoomed in on angled lines they moved out of view making them difficult to select or position to a snap point. If I selected those lines then they remained in place when I zoomed in.
When I approached the company manager he replied by saying that he would zoom in then zoom out to the point where the lines were correct and in place. I thought that he was either joking or was testing me! It meant I could not do any detailed work - which contradicts the use of Auto CAD.
The question has to consider the fact that the lines were angled and that they remained static when selected. When zooming in and selecting them they were off and running out of the screen view. also note that my colleague at the next desk opened up the file on V2008 and he could zoom in okay. I was also using a wide screen if this matters.
I created this website for a client and it can be viewed at Uscantravel.com. However being in the SEO phase of the site, the publish for Static HTML to make the website search friendly turns off the animated pop-ups and links that are layered within symbols with additional animations. It works fine when I save the .html file and upload that, but the published file for static alters the website animations when uploaded.
Can I somehow use the copy and paste the Div tags into the workable .html file to make search friendly, or am I missing something?
I need to take a batch of pdfs and remove the links associated inside the file so they stay static.
View 4 Replies View RelatedOften when I want to fix a spot e.g., on a face or other surface, I can find a very small area of the surface (the "source") from which to clone. So I clone from this small spot many times on the destination location. I can't move the cursor because I would then move off of the limited source spot. What I'm looking for is a technique for picking a "source" spot and then be able to use that spot seamlessly over a larger "destination" area without being tied to the source spot. FOR EXAMPLE, if the BRUSH tool is selected, and a color identified (alt click to temporarily turn the brush tool into an eye dropper), the "source" is now identified and that source can be used all over the image because the "brush" is not tied to a static source. I need a technique that is equivalent to that but with the clone tool.
Summary: Needed, a clone tool that is "static"--once the source is identified, it can be used all over the destination location without being tied to the source. No, the Spot Healing Brush, Healing Brush and Patch tool don't do this. Using the regular brush (after selecting the color via alt-click), followed by adding noise to simulate skin yields only so-so results.
Standard sheet number option gives you only 1, 2 and so on.
I want A1 where A does not change and 1 changes depending on sheet number.
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)