I am using Revit 2012 and I am trying to do a walkthrough down a street. I had 1000 frames and 5 fps because we want it to move really slow... but with 5 fps it is choppy. So I tried adding more frames but when I export it I can an error message when I try to play the file saying "Windows Media Player encountered a problem while playing the file".
I am not sure what I am doing wrong.. is there a maximum amount of frames you can use?
Been combing over the interent to try to figure out how to (in CS6 PS) get multiple gif to load onto the same static image that have different amount of frames, thus far I have my two gifs (on opposite sides) on the image and a short title video in the center but it starts with all three images and then runs the two gif until the the first (8 frames) runs out then the remainder of the second runs out at 13 frames and lastly the rest of the video plays each frame.
My goal is to get the video to just play naturally in the center and each gif on the sides to play on a loop as I want the entire image to be a banner for a website.
Win7 64 bit CS6 photoshop
Gif1 = 8 frames/layers Gif2 = 13 frames/layers video = 96 frames/layers (also it is set at a very low resolution and is just a title with a second title transitioning in)
Adobe says, that you can select a group of frames, edit 1 frame from the group, and it will apply that for the rest of them. In order to do this, it says have one frame selected, the Shift-click another one. I had a frame selected, and then I shift-clicked another. Nothing is highlighting.
'm using PS 3 Extended 10.0. I've imported video from Premiere & I would like to edit each frame in exactly the same way. I'd like to use the eraser tool to erase almost everything in the frames. I can do this 1 frame at a time, but there are 160 frames so it would take too long. Also, I want the erasure of each frame to be the same, & if I do it 1 frame at a time, each one will be slightly different. How can I make a uniform erasure of all 160 frames at the same time? I treid using the "actions" command, but it didn't work.
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
If a want one assembly with, lets say, 2 steelframe cases made with frame generator, and I want to have a piece of wood between them and I want to edit the position of the cases and the thickness of the wood. Then I need to do the frame generating in 2 separate assemblies and bring them together in a mother assembly?
1) How do I make a border with a transparent middle section. So I can use that border for a flash project (picture album etc). I know how to make a border over a picture, I just need to know how to make a border that I can use over any image of my choosing.
2) How do I make a text only image that is transparent. Lets say I make the word "Home" with a Bevel, how do I keep the word only without the white background? I keep getting the full canvas size (e.g 100X100) with the word Home in the middle (including all the effects I add to the word) on a white background, even when I have set my options to transparent background.
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
Is it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
The creation of viewframes with automatic station range at scale 1/2000 produces viewframes and sheets with ranges 0+000 - 0+738 then 0+738 - 1+456 and so on.
It is possible to creat onyl 1 viewframe with user specified station range i;e; 0+000 - 0+700. For a long alignment it involves to repeat the operation all along the alignment by ranges of 700 m. Or use the automatic range option and then make boring adjustments on viewframes and long profiles of the sheets to fit to the 700 m successive ranges we would like to draw.
Is there a possibility to produce directly multiple viewframes with a user specified station range of, say, 700 m on the entire alignment. If this is possible it would be great.
More great: would it be possible to set an overlap of 50 m for example between successive viewframes (sheets)ranges so that we have ranges 0+000 - 0+700 then 0+650 - 1+350 then 1+300 -2+000 and so forth.
When attempting to add text to a photo, the typed text is not visible on the layer in the "Layers Box" until exiting the Text Tool. Text nexer is visible on the photo Background image. If the edited image is saved, the added typed text is not saved; only the original Background image. How do I reset the Text Tool so it will be functional?
I think I may have made a big error. While adding text and applying (experimenting) various "Effects" with the text, I used the garbage can icon to remove the "Effect", thinking it is going to remove the 'Effect" from the text, until I realized I had to remove the "Effect" with the edit button, not the garbage can. Have I now permanently removed the various "Effects" permanently or just off the screen? How do I regain them back onto the menu column? How many "Effects" should be visible in order to have the complete set? This was my first experiment with the lettering effects and hope I haven't lost them forever.
I have a logo watermark x 2 which I need to add to a number of pictures, is there a way I can do this in one go or without manual input. I aware of the function that allows a text watermark to placed on an image while processing multiple pictures. I am elements 9 user.
Any way to preserve spaces between text boxes or frames, in other words if i designed a template consist of two text boxes the space between the first and the second box is 9.77 mm then i removed some text from the first text box (auto fitting to content) so the height of the first text box will decrease and the space between the two text boxes (9.77 mm) will increase, what i want to do is to fix this space so if any text box decreased in height the other text box lefted up or down to fix this space (9.77 mm).
When I draw a frame, suddenly In-Design has started to put a slightly larger area around it which also repels text. I must have inadvertently invoked this feature somehow, but as I'm not sure what I did to cause it I can't work out how to rid myself of its effect.
Just started with CDRX6 (Upgrade) and find a frustrating feature with text in text frames. If you import text into a frame and then move the position of the frame in the layout, the text repositions in a waterfall motion within the frame. It takes a second or two to settle down, and the frame also jumps position somewhere else en route before reaching the point you are dragging it to. It can be moved more smoothly using the arrow keys, but that is painfully slow.
I do not have this problem with X5. Is it a symptom of some new feature in X6, or is it a fault in installation?
There's this GIF that I'd like to use for a banner and when I open the file in GIMP, add a text and then check the animation in the playback window, I can only see the text once the GIF has ended but also, I can only see the text for like one second.
Is it possible to make the text visible on all of the frames of the GIF without having to duplicate the text 100s of times and merging them onto each frames?