Xara :: Page Numbers And Text Frames?
Sep 15, 2013
From the File>New I take the A4 - 1 Column template and then add a side by side page and no page number appear on the right page.
If I then add text so that it overflows the pages 1 and 2 and creates two new ones the left hand one now has page 3 but still no page numbers on the right.
If add text to a single A4 1 Column and overflows it creates a second page with page number as expected, if I then convert it to side by side it has the page number on the right.
My question is why it works in the second method and not with the first, when setting up a new document it is the path one would expect to set the pages as you want first.
Is there any way of showing the text areas (frames) just not when you click in them? as one does to show grids.
View 5 Replies
ADVERTISEMENT
Mar 27, 2014
I made this gorgeous table of contents with nice paragraph styles and a text frame on the master page. I put the text in the first frame and that filled my pages as intented. After that I used my paragraphs titles and the table of contents was done. But now I have a problem because I need to change the page order. I'm completely lost cause now my document is a mess. So is it possible to make a table of contents without using connected text frames because I know that I will have to change page order later and I want to avoid the mess I just made?
View 1 Replies
View Related
Feb 4, 2014
I'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies
View Related
Aug 20, 2010
I have used earlier versions of VS in the past with virtually no issues , last version wbeing VS11 Plus. I recently "Upgraded" to VS Pro X2 and am trying to burn my first project with it. During the share stage, trying to make a DVD I get the message "Some chapter entry frame numbers exceed the total frames" and NO I did not edit the project after adding the chapters in the share stage. Seems from google searches that this is an old issue for which Ulead issued a patch in earlier versions, but it is back! One post suggested creating a video file of the whole project then importing that without creating a new project then sharing it and adding chapters.
I tried that and found that the audio for the second half of the project got dropped. If you press Info on the DVD player it displays Dolby 3/2 on the TV screen, but the AVamp shows no Blue Dolby multichannel light and detects no audio streams available. This dropping of audio occurs at a transition between two clips in the original project. The "missing" audio is present in the mpeg file created, and you can hear it if you play the file in the "Edit" tab. It simply does not get carried over to the disc burn. I tried twice. ANyway, that is a secondary issue and I'm not too bothered about that. I would much rather get a fix for the Chapter frame numbers issue and thus avoid the video file creation process.
I have tried taking a few frames out of each clip and re-rendering the whole project again to no avail. I have also tried deselecting two pass conversion.
View 14 Replies
View Related
Jun 5, 2013
This is regarding a error message by Video Studio Pro X5 understanding a fault message which I got after creating a DVD map. This is the original message in Dutch: "Sommige startframenummers van hoofdstukken zijn groter dan het aantal frames". 533:-2147216477:0 Translation: "Some start frame numbers of chapters are greater than the number of frames"
This was also discussed here - but I can not understand the solution: viewtopic.php?t=24055&p=120629
The situation: I have all the same video files (H.264, 24 bits, 25.000 f/s) [worked with this kind of files a couple times and worked alway very well] I have added some tekst and pictures. Total length of video is 01:50 hour. Starting the procedure DVD creating, with burning the DVD folders on my harddisc. Afther the burning proces I got the fault message.
After creating the DVD map I got the fault message (as describbed above) and found on my harddisc the VIDEO_TS folder with 5 files VTS_01_1 till VTS_01_5. The total time of these loose files is ca. 76 minutes. So I missed a hughe chunk. I got the same fault message when I have created chapters within the videofile but also when I created chapters later at the video menu.
When I do not burning a DVD folder but select creating a video file (DVD-video) than I get separated end files instead of just one big file. Maybe this has the same cause?
View 14 Replies
View Related
Apr 14, 2008
I cannot figure out how to get lightroom to print page numbers when printing a catalog, It places the page numbers at the very edge of the page, and my printer needs a .25" margin (it won't print to the edge of the paper).
how I can get page numbers to print?
Also, It is taking forever to print my 77 page catalog of 1524 photos--does everyone have this trouble? (an hour so far and not even half done "preparing"--this is a small library for me, only 12 gigs... many of my libraries are 500 gigs)
View 1 Replies
View Related
Apr 1, 2014
is it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
View 1 Replies
View Related
Feb 6, 2014
I need to edit page numbers (see below). I have tried to delete, move, copy, and select to no avail.
I know you can add page numbers by going to Type > Insert Special Characters > Markers.. The options listed in Markers are not clickable. how I can edit these page numbers.
View 3 Replies
View Related
Jul 26, 2013
When I do a detailed set of drawings I first start with the overall and ballon the part showing the BOM. The following pages will reflect the detailed parts balloned on the first page. Is there a way, without haveing to manually type in the BOM, to reference which page this detail is on in the BOM?
View 9 Replies
View Related
Mar 17, 2012
I have designed and printed a BLURB book in LR4 beta successfully. Although the color was somewhat streaked and blotchy, it wasn't a bad effort, but it does need refinements. How I might add page numbers? Without page numbering, making a book greater than a few pages is not really acceptable.
View 2 Replies
View Related
Mar 17, 2012
I am playing with the book module and I love it. Hwever, I wonder whether there is a possibility to automatically create captions that show the date of the creation of a picture. More generally any subset of the Exif data would be welcome. This is possible for slideshows, but I could not figure out how to do this with book pages.
Is there a way to automatically insert page numbers?
View 1 Replies
View Related
Jan 16, 2011
Does Xara Designer support the ability to change one object on for example page 1, and that the change propagates to all the same objects on all other pages? I'm doing a lot of web design work, so this would be quite handy, but I haven't found a way to do that.
View 2 Replies
View Related
Sep 26, 2012
I am trying to add page numbers to an existing document. I have tried to add them in Prepress, but all I see is the "Print File Information" and even that is not in a location I want. I have the "Position Within Page" checked.
View 1 Replies
View Related
Apr 28, 2012
I have a document of 34 pages with page numbering. how can i curve all page numbers? if i curve one page number say 25, all pages get numbered as 25.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 4 Replies
View Related
Jun 8, 2012
I am setting up a template and want my page #s to automatically update when i copy a tab. How is this done? I currently have my "Total Sheets" as a field and that works out fine but often need to add/ remove a sheet to/from drawing and would like the page #s to update.
View 6 Replies
View Related
Jun 6, 2012
So I'm playing around with Inventors Tube and Pipe to show how to do all of our flexible hose routing throuh our chassis. It is a large assemblly with alot of hoses, so it will take multiple views to show how to route all the hoses. I have done all the routing, but am now looking at how to document it.
I have the parts list setup to show each individual run. So for example if my assembly had two runs, my parts list would look like the following:
Item......Qty......Stock Number.........Description
1..........59".......6295645.................Gladhand to filter hose
2..........120"......6295645................Filter to Control Valve hose
Now my idea is to show a couple of ISO views on the front page, along with the parts list. On the ISO views I would make a bunch of Detail Views on the following sheets, and then in each detail view, I will use balloons to identify which lines are which.
Now say ther eare a dozen pages, I don't want people to search all 12 pages just to find which detail views Item 1 shows up in. Is there any way to automatically show in the Parts List that Item 1 is shown on pages 1,2,3,6,7,9,12 and that Item 2 is shown on pages 2,3,5,7,10,11,12? This list would populate based on which sheets have a balloon for that given item number.
Any better way to document hose runs in a large assembly? In the end the goal is so that someone could pick up the drawing package, know they are running the "Gladhand to Filter hose", find it in the parts list, and then flip to the appropriate pages that show how to route that hose.
View 9 Replies
View Related
Feb 28, 2014
I set up a pretty little table of contents for a handbook and wrestled the styles into place. But, for some reason, I have two page numbers that are wacked out to the right of everything else.
The page numbers are set up on the master page and are very simple. It's the same master for all of the pages.
There are two styles at work in the TOC, messing with those doesnt change anything.
Why would these two, and only these two, get kicked off their mark?
View 4 Replies
View Related
Oct 19, 2013
How to convert Hex values or RGB values in Xara, to Pantone numbers?
I've never had to look at this before.
But, now, having designed a logo, I assume that I will need to provide Pantone colour numbers etc...
View 9 Replies
View Related
Feb 18, 2011
I just want to ask if there is a way to delete a couple of frames at ones. I mean, like delete frame 20 to/through 60 and then the 40 frames will be deleted instead of pressing the delete button 40 times?
View 2 Replies
View Related
Jul 18, 2012
P & G D 2013
when photo frames are opened in the gallery, each style has the 4 options, but when dragged across all four come over and not the one required. This is for simple adding of a photo in frame to a page.
View 6 Replies
View Related
Dec 2, 2011
I have just discovered that the Plugin Site Galaxy Edges & Frames CD cant be used in Live Effects in Graphic Designer 7.
These are the instructions on their CD for using with Xara, but after create bitmap and export i cant get it to work properly!!
1. Import the photo file you want the frame to be applied to with Import from the File menu.
2. Import one of the frame files from the frame sub folder with Import from the File menu.
3. Select the Bitmap Gallery from the Utilities menu.
4. Right click on the frame file in the Bitmap Gallery and select Apply as transparency from the context menu.
5. Use the handles of the frame object to make it the same size as the photo. Makes sure that the frame lies over the photo.
6. Choose Select All from the Edit menu or press Ctl +A to select both objects.
7. Choose Group from the Arrange menu or press Ctl+ G to combine both objects.
8. Select Create Bitmap Copy from the Arrange menu or press Ctl+ G to combine both objects.
9. In the Create bitmap option dialog make sure that the correct settings are set (e.g. that the color depth is set to 24bit) and press the Create button.
10. Save the created bitmap with Export from the File menu.
the pic looks like this:
View 2 Replies
View Related
Aug 11, 2012
How do you edite all animation frames at the same time? Can't figure out how to do it...
View 1 Replies
View Related
May 11, 2012
I have created a simple animation with 6 frames in the gallery. I want to link each individual frame to different websites. So, as the animation on the site is changing, you can click on one frame, and it takes you to one site, or you click on the next frame and it takes you to another site.
View 2 Replies
View Related
Jan 28, 2012
Several times a week I need to take a PDF (single-page doc), then convertto a page-sized PNG with quality good enough to read the text (and atransparent border), and then convert to a SWF. I have a PNG-to-SWFutility, but when I used it on the PNG saved after I opened my PDF andexported from GIMP, the end result was not good enough. A co-worker saidGIMP couldn't make a PNG (w/transparency) with enough quality. He said we'dhave to use some other software. Part of the issue was not being able toresize without losing quality before the PNG export. True or false?
View 3 Replies
View Related
Mar 30, 2012
If it's a bug, then I cannot believe it wasn't caught before the release. So here it is. I simply put artistic text down on page 1. Select the text and copy to clipboard. Add a new page and paste the text. On my computer, the text changes from artistic text (as copied to clipboard) to paragraph default text left justified across the center of the page. It doesn't matter how much text I select, it always pastes on the new page as paragraph text left justified and across the center of the page.
However, if I select artistic text and any other object, copy and paste to a new sheet, it works erectly. Apparently, I now have to select text and an object to insure that the paste feature works properly?
View 14 Replies
View Related
Apr 5, 2011
Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies
View Related
Aug 5, 2013
A little + sign appears at the bottom right corner of a text cell when the text overflows. I find I cannot pick up the additional text by clicking the + sign to place it on the next text cell thus linking text from page to page. Am I missing something or is such a useful facility unavailable in Lightroom? If that's the case, is there a good reason for Lightroom not offering text linking between pages?
View 2 Replies
View Related
Sep 15, 2011
I am getting an internal error 3541.K.No.ar when trying to add a page to my existing 6 pages
View 3 Replies
View Related
Oct 17, 2012
I am working on a project which needs..Text frames to be converted as flash text >property changed to dynamic text > writing instance name “_txt”.so how can i write scripting on above process.
View 5 Replies
View Related
Apr 16, 2013
When I'm working on a design for which I'm generating options, like a logo, I usually work with one Xara file and a new page for each option. When it's time for me to export each page as a JPEG or PNG, it's really frustrating that each and every time I have to tell Xara to save the Page, NOT the default Page Content. I'm thinking there should be a way for Xara to remember and repeat my last export settings, but I can't find it...
View 3 Replies
View Related
Mar 16, 2011
I have just started to design my first webpage using Xara Designer Pro 6. I am attemptimg to add a clock widget to the page. how to add the embed code to a page.
View 3 Replies
View Related
