I am playing with the book module and I love it. Hwever, I wonder whether there is a possibility to automatically create captions that show the date of the creation of a picture. More generally any subset of the Exif data would be welcome. This is possible for slideshows, but I could not figure out how to do this with book pages.
Is there a way to automatically insert page numbers?
I cannot figure out how to get lightroom to print page numbers when printing a catalog, It places the page numbers at the very edge of the page, and my printer needs a .25" margin (it won't print to the edge of the paper).
how I can get page numbers to print?
Also, It is taking forever to print my 77 page catalog of 1524 photos--does everyone have this trouble? (an hour so far and not even half done "preparing"--this is a small library for me, only 12 gigs... many of my libraries are 500 gigs)
I have designed and printed a BLURB book in LR4 beta successfully. Although the color was somewhat streaked and blotchy, it wasn't a bad effort, but it does need refinements. How I might add page numbers? Without page numbering, making a book greater than a few pages is not really acceptable.
View 2 Replies View RelatedHow can I stop Lightroom 3 opening automatically whenever I insert an SD card?
View 5 Replies View RelatedI'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies View RelatedIf i had a file called example.jpg already saved in a folder how can i get Photoshop to save the same image again but as example(1).jpg (or similar). At the moment it will just save over the original file if i don't change the name .
View 2 Replies View RelatedIs it possible to automatically add numbers to faces in a picture?Next step is to insert the picture in a Word file where I can create a legend which tells which number in the picture is who.I understand that I need to insert the picture twice in the Word doment, 1: the original without numbers, 2: the numbered version with the legend.
View 1 Replies View RelatedI have a drawing that draws from a .dxf template, this drawing is for a piece that travels along on a basket. Often times there's more than one "traveler" so in order for me to differentiate each traveler I added an "XX of XX" on the template, the XX's referring to the traveler number and the total travelers (i.e. 01 of 03).
Before I print out the sheet I have to replace the XX's with the real numbers then I can print it, so if theres 45 travelers i have manually click each time and then type the number in, 01 of 45, 02 of 45, 03 of 45... 45 of 45. Is there a way I can get this process automated like where I'm asked how many sheets I need then it automatically populates the sheet?
there a way to make a Number Climb or count up like in this After Effects tutorial?It's a type of thing that's really useful for infographics.
View 1 Replies View RelatedSometimes Photoshop automatically change my font sizes to uneven numbers. For instance 12 pt changes to 11,98 pt. Why and what could be done to avoid this? Also XY positions of objects in Illustrator get changed to sligtly different numbers like 9,98 px.
View 5 Replies View Relatedis it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
I need to edit page numbers (see below). I have tried to delete, move, copy, and select to no avail.
I know you can add page numbers by going to Type > Insert Special Characters > Markers.. The options listed in Markers are not clickable. how I can edit these page numbers.
I've got a customer that needs 1000 serialized artwork for a project. Is there a way in CorelDraw to layout a series of artwork and have the numbers automatically change from 0001 to 1000?
Script??
I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time.
View 4 Replies View RelatedWhen I do a detailed set of drawings I first start with the overall and ballon the part showing the BOM. The following pages will reflect the detailed parts balloned on the first page. Is there a way, without haveing to manually type in the BOM, to reference which page this detail is on in the BOM?
View 9 Replies View RelatedFrom the File>New I take the A4 - 1 Column template and then add a side by side page and no page number appear on the right page.
If I then add text so that it overflows the pages 1 and 2 and creates two new ones the left hand one now has page 3 but still no page numbers on the right.
If add text to a single A4 1 Column and overflows it creates a second page with page number as expected, if I then convert it to side by side it has the page number on the right.
My question is why it works in the second method and not with the first, when setting up a new document it is the path one would expect to set the pages as you want first.
Is there any way of showing the text areas (frames) just not when you click in them? as one does to show grids.
I am trying to add page numbers to an existing document. I have tried to add them in Prepress, but all I see is the "Print File Information" and even that is not in a location I want. I have the "Position Within Page" checked.
View 1 Replies View RelatedI have a document of 34 pages with page numbering. how can i curve all page numbers? if i curve one page number say 25, all pages get numbered as 25.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I am setting up a template and want my page #s to automatically update when i copy a tab. How is this done? I currently have my "Total Sheets" as a field and that works out fine but often need to add/ remove a sheet to/from drawing and would like the page #s to update.
View 6 Replies View RelatedSo I'm playing around with Inventors Tube and Pipe to show how to do all of our flexible hose routing throuh our chassis. It is a large assemblly with alot of hoses, so it will take multiple views to show how to route all the hoses. I have done all the routing, but am now looking at how to document it.
I have the parts list setup to show each individual run. So for example if my assembly had two runs, my parts list would look like the following:
Item......Qty......Stock Number.........Description
1..........59".......6295645.................Gladhand to filter hose
2..........120"......6295645................Filter to Control Valve hose
Now my idea is to show a couple of ISO views on the front page, along with the parts list. On the ISO views I would make a bunch of Detail Views on the following sheets, and then in each detail view, I will use balloons to identify which lines are which.
Now say ther eare a dozen pages, I don't want people to search all 12 pages just to find which detail views Item 1 shows up in. Is there any way to automatically show in the Parts List that Item 1 is shown on pages 1,2,3,6,7,9,12 and that Item 2 is shown on pages 2,3,5,7,10,11,12? This list would populate based on which sheets have a balloon for that given item number.
Any better way to document hose runs in a large assembly? In the end the goal is so that someone could pick up the drawing package, know they are running the "Gladhand to Filter hose", find it in the parts list, and then flip to the appropriate pages that show how to route that hose.
I set up a pretty little table of contents for a handbook and wrestled the styles into place. But, for some reason, I have two page numbers that are wacked out to the right of everything else.
The page numbers are set up on the master page and are very simple. It's the same master for all of the pages.
There are two styles at work in the TOC, messing with those doesnt change anything.
Why would these two, and only these two, get kicked off their mark?
I sell limited edition prints of a run of between 350 and 500.
I am trying to get it set up so that my signature and the print number is included as part of the print. Here is an example:
You'll see at bottom left there is my signature and underneath is is the print number e.g. 110/350 (this is legible when printed at 18x12" size).
Inserting the signature and the "/350" is easy since it only needs to be done once per image.
The difficulty comes with inserting the actual print number e.g. "110"
At the moment I have 0 to 9 written out and scanned in as separate numbers. So to make "110" I use the "1" digit twice, plus the "0" digit. I.e. I haven't written out 1 to 500 and scanned them in all as separate numbers, I've just done the 10 digits and use those 10 digits to make all the different numbers I need.
Is there a way to create an action that will create say 350 JPEG copies of the original file, each one with its own unique print number inserted? (And ideally automatically saved with the print number as its file name!)
automatically insert the arc like the picture? Is there a setting somewhere that will do this? Right now when we have a location that cannot accomodate the text we are drawing an arc and grip moving the dim text to the new location. I am trying to find a more automated way to handle these types of situations.
View 1 Replies View RelatedI currently set up out civil 3d to do auto linework, which went really smooth.The first issue is with my points. When I go to Import Survey Data to insert the points and do auto linework, it doesn't insert the points in the right location (nothing is .86 off and easting is 1.36 off on every point). But if i were to insert the points by going to Points and clicking Import, they are right on? second, who do I get symbols to automatically come in when I insert the points? (power poles, hydrants, inlets, etc.).
View 9 Replies View Related2010 how can we obtain the block automatically insert the attributes as shown in red
View 0 Replies View RelatedI have created a leader from a block and I need to have that leader automatically insert data from an object. I have tried several attempts with a the FIELD command, but to no avail.
View 1 Replies View RelatedI need the logos on this poster to be distributed in alpha order in a grid pattern. Is there an easier way to do this than manually setting them in place? Like a script or something?
View 5 Replies View RelatedI had inserted a block on my model page. I then wanted to insert it on my layout page where I wanted to have a legend. The block never showed up on the layout page and now it is not on my model page. When I attempt to insert it anywhere else now, the block does not show up in the preview window of the insert popup, nor on the drawing.
View 9 Replies View RelatedI want to insert or import an image that automatically recognizes my drawing coordinates.If I need to, I can use AUD (as Map 3D).However, my computer has difficulty processing too much data.
View 7 Replies View RelatedIf I would like to compose a booklet in Corel Draw, how can I insert page numbers ?
I know the use of Master Layer. But contents on it will remain unchanged for all the pages. However the page numbers should auto increase page by page.
Adobe InDesign or pagemaker is useless infront of Corel Draw. But the problem of Footer (page numbering) has to be resolevd. So that Corel Draw will replace InDesign or related book work softwares.
how to add page numbers.
Is Autudesk Express Viewer still available. I need a viewer to insert in my web page so prospective clients can see some of my floor plans. Marking up is not a need.
View 1 Replies View Related