I am trying to add page numbers to an existing document. I have tried to add them in Prepress, but all I see is the "Print File Information" and even that is not in a location I want. I have the "Position Within Page" checked.
View 1 RepliesI'm attempting to add page numbers to a 200 page document with no success. How do I add page numbers? This should be a simple process.
View 1 Replies View RelatedI have designed and printed a BLURB book in LR4 beta successfully. Although the color was somewhat streaked and blotchy, it wasn't a bad effort, but it does need refinements. How I might add page numbers? Without page numbering, making a book greater than a few pages is not really acceptable.
View 2 Replies View RelatedI quite often need a separate ruler scale on each page of a multi-page document. The only way I know how to do this is to create a separate document for each drawing that requires a new scale.
I request that you add the ability to change the ruler scale on a per page basis within a single multi-page document.
I am using CDR X5 SP1.
I have a document of 34 pages with page numbering. how can i curve all page numbers? if i curve one page number say 25, all pages get numbered as 25.
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
I hereby have a school note report from my little brother. He told me he had some bad notes in his last period and I would like to make a fake copy of it.
Basically, I scanned his 3th period notes and I would like to change some and add some
How you can remove numbers and add new ones over it and add numbers with the same digital code used on the old ones to put those in empty notes
I have a document with multiple pages. How can I change the background of only one page? In the layout settings I only can set the background for all pages.
View 10 Replies View RelatedI have a multi page document that has twice the size I originally I thought it would so have decided to split it. What is the best way to do this?
I can only think of copy and paste each individual page into a new doc but if there is another way to chose multi pages by the tabs at the bottom.
My document palette adds the same colors that are NEVER in my art every time. I swear it's a glitch. The colors are so bizzare. And when I go to delete any of them, it says I can't because they are in use. But they are for sure not being used.
Here's a list of the colors:
Black A0QM, Pantone 142, Black A0QM (1), Black A0QM (2), Black A0QM (3), DIC 2287p* (1), PANTONE 142 (1), Black A0QM (4), PANTONE 142 (2), Black A0QM (5), Black A0QM (6), Black A0QM (7), DIC 2287p* (1) (1), PANTONE 142 (3)
That's the order they are always in. I don't even know where you would get any of those colors and what they would be used for? Except the Pantone of course.
Is it possible to assign a type of link to an object or text where the user can open the document and click on the object which is on the first page and it will take them to a specified page set by the link? This is kind of like web design but not, know what I mean?
View 4 Replies View RelatedI need to replace a common image on every page of a 32pp document. The reason being the original one has no bleed on. I have retouched the image to include bleed, but how do I replace or re-link the new one?
There is no links showing up in my links dialog docker at all..?
Is there any free macro or any script in this forum to convert all the outlines (in a document or page) to objects .
View 4 Replies View RelatedZero point.JPG
When a new page or document is created, by default the zero point is set at the bottom left of the page. Is there a way to set it to another point like top left so that all new documents open with it set that way. (top left)
How do I get my text from my TextBox1 (add text) by pressing my CommandButton1 (okay) to my active page or document?
View 1 Replies View RelatedAfter moving a page in my document the master page elements no longer display on screen or in print. If I move the page to a different location in the document the master displays but if it is in the specific position that it needs to be it will not display. The document has multiple Masters and others do work on the page but the one that I need will not. I've tried deleting the page and adding a new one and that does not fix the problem. I've checked and "Hide Master Items" is not checked. The page in question is in position 48 with F-Master applied. If I move it to position 49 it works, 50, it works, 51, or any other it works. If I apply a different master to the page, it works. If I delete the page, add a new page and apply F-Master it still does not work. The only page that this problem is happening on is page 48.
View 1 Replies View RelatedThis was very easy to do in earlier versions of Illustrator, but now it seems like the only option is to make a separate artboard for each page tile!
View 1 Replies View RelatedThe code below crashes with an "attempt to write to protected memory" in debug mode (it crashes when it hits acDocMgr.add)but in the Release version it works fine. I am using Command Flags.Session
Dim acDocMgr As DocumentCollection = Application.DocumentManager Dim pStyle As Integer = Autodesk.AutoCAD.ApplicationServices.Application.GetSystemVariable("PSTYLEMODE") Dim acDoc As Document = Nothing If pStyle = 1 Then acDoc = acDocMgr.Add("acad.dwt") Else acDoc = acDocMgr.Add("acad -Named Plot Styles.dwt") End If
I cannot figure out how to get lightroom to print page numbers when printing a catalog, It places the page numbers at the very edge of the page, and my printer needs a .25" margin (it won't print to the edge of the paper).
how I can get page numbers to print?
Also, It is taking forever to print my 77 page catalog of 1524 photos--does everyone have this trouble? (an hour so far and not even half done "preparing"--this is a small library for me, only 12 gigs... many of my libraries are 500 gigs)
is it possible to have folios in decimals?
Each page, i.e.
1
1.1
1.2
1.3
2
2.1
2.2
I need to edit page numbers (see below). I have tried to delete, move, copy, and select to no avail.
I know you can add page numbers by going to Type > Insert Special Characters > Markers.. The options listed in Markers are not clickable. how I can edit these page numbers.
Lisp file to get serial letters and numbers from existing ones,
I got a lisp file (attached) from experts in the form which does generate serial letters and numbers from existing ones.
The issue with this lisp file is that it doesn’t give the opportunity to choose the direction of numbering (top to bottom/bottom to top/left to right/right to left) as shown in the screenshot below
How this lisp can be developed to give the user the chance to choose the direction of numbering?
When I do a detailed set of drawings I first start with the overall and ballon the part showing the BOM. The following pages will reflect the detailed parts balloned on the first page. Is there a way, without haveing to manually type in the BOM, to reference which page this detail is on in the BOM?
View 9 Replies View RelatedFrom the File>New I take the A4 - 1 Column template and then add a side by side page and no page number appear on the right page.
If I then add text so that it overflows the pages 1 and 2 and creates two new ones the left hand one now has page 3 but still no page numbers on the right.
If add text to a single A4 1 Column and overflows it creates a second page with page number as expected, if I then convert it to side by side it has the page number on the right.
My question is why it works in the second method and not with the first, when setting up a new document it is the path one would expect to set the pages as you want first.
Is there any way of showing the text areas (frames) just not when you click in them? as one does to show grids.
I am playing with the book module and I love it. Hwever, I wonder whether there is a possibility to automatically create captions that show the date of the creation of a picture. More generally any subset of the Exif data would be welcome. This is possible for slideshows, but I could not figure out how to do this with book pages.
Is there a way to automatically insert page numbers?
I am trying to add sheet numbers to my template for my document. I know I have to use the Sheet Properties, Sheet Number then Drawing Properties, Number of Sheets but I cannot remember how to do this? I am using IV 2010. There used to be a Properties Field icon, but now I cannot find it? I RMB on the title block, select "Edit", then selected the location of the property, then selected Sheet Properties, Sheet Number, but nothing shows up.
View 2 Replies View RelatedI am setting up a template and want my page #s to automatically update when i copy a tab. How is this done? I currently have my "Total Sheets" as a field and that works out fine but often need to add/ remove a sheet to/from drawing and would like the page #s to update.
View 6 Replies View RelatedI am on a project of making 12,500 tickets and so far, I'm at 500 out of 12,500 .. I was just wondering if Photoshop or other Adobe programs can Add Sequential Numbers on a particular area ON a picture,
Example: (this is what i 'm doing, i'm doing it manually, saving it one by one.. and it is taking some time, it's been 2 days already)
then..
and..
and repeat the process again ..
there.. i've tried using recording Action. How to use script, (if i have to use script, can you instruct me on a step-by-step procedure or atleast pinpoint me to a thread that explains it, because the ticket's deadline is on May 4th, and again i have 12,500 tickets to make)
also the way that i print this is first as you can see saving it one by one as .jpeg and selecting 9 of the .jpeg files, right click, then print as wallet size, for it to fit in a 8.5 / 11 paper.. there..
I've been given the task of numbering our blueprint files (.tif format). I need to add around 800 ballooned numbers to each drawing at specific locations. These are just numbers with a circle around it.
Currently, I'm manually adding the number as text and then drawing a circle around it, then the next number, another circle etc.
So I'm playing around with Inventors Tube and Pipe to show how to do all of our flexible hose routing throuh our chassis. It is a large assemblly with alot of hoses, so it will take multiple views to show how to route all the hoses. I have done all the routing, but am now looking at how to document it.
I have the parts list setup to show each individual run. So for example if my assembly had two runs, my parts list would look like the following:
Item......Qty......Stock Number.........Description
1..........59".......6295645.................Gladhand to filter hose
2..........120"......6295645................Filter to Control Valve hose
Now my idea is to show a couple of ISO views on the front page, along with the parts list. On the ISO views I would make a bunch of Detail Views on the following sheets, and then in each detail view, I will use balloons to identify which lines are which.
Now say ther eare a dozen pages, I don't want people to search all 12 pages just to find which detail views Item 1 shows up in. Is there any way to automatically show in the Parts List that Item 1 is shown on pages 1,2,3,6,7,9,12 and that Item 2 is shown on pages 2,3,5,7,10,11,12? This list would populate based on which sheets have a balloon for that given item number.
Any better way to document hose runs in a large assembly? In the end the goal is so that someone could pick up the drawing package, know they are running the "Gladhand to Filter hose", find it in the parts list, and then flip to the appropriate pages that show how to route that hose.
I set up a pretty little table of contents for a handbook and wrestled the styles into place. But, for some reason, I have two page numbers that are wacked out to the right of everything else.
The page numbers are set up on the master page and are very simple. It's the same master for all of the pages.
There are two styles at work in the TOC, messing with those doesnt change anything.
Why would these two, and only these two, get kicked off their mark?
I am using LR 5.3 for real estate photography using bracketing of sets of 3. Then creating stacks by capture time in LR. I would like to know if I can apply a preset to ALL of a specific number of a stack (such as all #1's, all # 2's or all #3's - when expanded of course) at one time rather than manually selecting all number 1's and then adding a preset; etc?
View 1 Replies View Related