I've been given the task of numbering our blueprint files (.tif format). I need to add around 800 ballooned numbers to each drawing at specific locations. These are just numbers with a circle around it.
Currently, I'm manually adding the number as text and then drawing a circle around it, then the next number, another circle etc.
I am on a project of making 12,500 tickets and so far, I'm at 500 out of 12,500 .. I was just wondering if Photoshop or other Adobe programs can Add Sequential Numbers on a particular area ON a picture,
Example: (this is what i 'm doing, i'm doing it manually, saving it one by one.. and it is taking some time, it's been 2 days already)
then..
and..
and repeat the process again ..
there.. i've tried using recording Action. How to use script, (if i have to use script, can you instruct me on a step-by-step procedure or atleast pinpoint me to a thread that explains it, because the ticket's deadline is on May 4th, and again i have 12,500 tickets to make)
also the way that i print this is first as you can see saving it one by one as .jpeg and selecting 9 of the .jpeg files, right click, then print as wallet size, for it to fit in a 8.5 / 11 paper.. there..
How to show the sequential numbers on the steps of stair?
I’m wondering if there is a way to show the sequential number on the steps of stair.
Also, we are all the time required to write the number of stairs, run length and rise length on the drawing. Is this possible in the Revit?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
I am curently working on a larger projekt, where we have aprox. 4500 pcs.of furnituer designed in 4 different kind of families, generic, furnituer, furnituer systems and specialty equipment. We need to be able to asign every pcs.of funituer a seqventual serial number, we have tried to do this using an extension with a funktion called element positionerning, but we have had no success with this tool, apparently it is taking up to much memory.
View 2 Replies View RelatedI have a large job for a client who uses antique computers. They are so old that he can't run Lightroom. As a workaround, I posted the images I wanted him to look at on SmugMug and we had a disaster. Their sequencing on screen does not match my "as shot" sorting on my Lightroom (4). Is there a way I can print sequential serial numbers/ids on my images before I upload them to SmugMug so we are always talking about the same image?
View 6 Replies View RelatedI am creating an image of 150mm x 100mm at 300dpi but photoshop keeps adding decimal points like 150.02 when i change the image from the original size, is it something I am doing wrong or a known bug? You would expect that when you change an image to 150 x 100mm it would stay at that size and not be added to.
View 2 Replies View RelatedI hereby have a school note report from my little brother. He told me he had some bad notes in his last period and I would like to make a fake copy of it.
Basically, I scanned his 3th period notes and I would like to change some and add some
How you can remove numbers and add new ones over it and add numbers with the same digital code used on the old ones to put those in empty notes
I have designed and printed a BLURB book in LR4 beta successfully. Although the color was somewhat streaked and blotchy, it wasn't a bad effort, but it does need refinements. How I might add page numbers? Without page numbering, making a book greater than a few pages is not really acceptable.
View 2 Replies View RelatedI am trying to add page numbers to an existing document. I have tried to add them in Prepress, but all I see is the "Print File Information" and even that is not in a location I want. I have the "Position Within Page" checked.
View 1 Replies View RelatedI am using LR 5.3 for real estate photography using bracketing of sets of 3. Then creating stacks by capture time in LR. I would like to know if I can apply a preset to ALL of a specific number of a stack (such as all #1's, all # 2's or all #3's - when expanded of course) at one time rather than manually selecting all number 1's and then adding a preset; etc?
View 1 Replies View RelatedI have draws with a a lot of layouts.In each layout, there is a block (CARTOUCHE) with a an attribute (PAGENUMBER)
I am looking for a way to select the block in my first layout, indicates a number for my attribute (PAGENUMBER). The lisp will automatically increase the attributes of the next others layout. How can I start this lisp.
I need to export with artboard. Illustrator automatically adds a number to my original file name. It won't even let me replace the old file. It is extremely annoying and makes flow with other programs really hard because they can't auto update, since the file name changes. When you have multiple files, you can't be manually renaming all the time.
View 4 Replies View RelatedI have an opportunity to make a good impression at a new job, but ive never had the initiative to learn how to write a lisp routine. at my work we make walk-in coolers and freezers. these coolers are modular with a standard wall piece measuring a certain length. these wall sections have to be numbered sequentially. is there any way to automate this? sometimes we get change order from the client and it means going back and manually changing multiple texts (sometimes in the hundreds), but i thought if there was a way these wall sections could be scheduled somehow that when a new wall panel is inserted in the beginning of the sequence it would update everything after it automatically.
View 9 Replies View RelatedHow to make the following script for adding serial numbers apply to multiple files in a selected folder?
var docRef = app.activeDocument;
with (docRef) {
var docName = name.substring(0, name.lastIndexOf('.'));
var artRight = visibleBounds[2];
[Code] .....
in CS5 we can use the count tool but How do we save that image with the numbers added?
View 8 Replies View RelatedPhotoshop CS3ext.When I go to size an image and try to adjust the size, the numbers take off on their own with out me even trying to adjust. Also in layers, all the slider bars, the numbers go crazy, up and down without me doing anything
View 2 Replies View RelatedI have subroutine that retrieves a list of detail numbers in a drawing. Sometimes there are missing numbers. I am looking to find a list of any missing numbers.
Example -
(setq List_DN (list 1 2 3 5 6 7 10 11 12 17))
Missing numbers are - 4,8,9,13,14,15,16
I would like a subroutine to take the List_DN are return the following missing numbers as text
(Get_Missing List_DN)
return
4,8-9,13-16
I am trying to link my parts list to a drawing however all balloons have different numbers.
I open the assembly and check everything out from vault I open my bom and change item numbers. When I get back to my drawing and apply for auto balloon I get completely different item numbers in my balloons. We just updated our software to a new 2012 version so it's maybe something with set up.
Is there a way to sync callout numbers to correspond with note numbers. When I add or delete notes in my drawings it takes to much time to update the callout number in the drawings. I need to figure out a way for the note and corresponding callout to change at the same time.
View 6 Replies View RelatedOn my website below (link at bottom), I have all my photos watermarked for obvious reasons,this is done by a normal batch convert action using CS2,the gallery is actually a modified Photoshop "Simple" type of thing.
All of the information you see on the image is actually part of it except for the image number,which is put there by your browser.What I'd like to be able to do is have that image number actually as part of the image and NOT seperate,so if someone saves it they still have that number visible.
Now I can do this manually,but I'd have to increment it by 1 every time by hand,and then copy & paste it onto the resized image by hand,which will take a long,long time.
Is there any way I can get PS to do this automatically for me,so I either specify the starting number,or it actually takes the file name (minus the extension,so no JPEG etc after it)and adds this text to the watermark layer while I put the kettle on?
When I import my photos from my hard disk to the organizer the image number does not come with it.
View 2 Replies View RelatedI have just started to try something using video in CS6. I have 82 sequential images and I am trying to string them together as a sort of stop motion film (think the intro to the Monkeys). I have done the following:
1. Opened Bridge and selected all of the images
2. From the tools menu I selected the Photoshop sub-menu and then selected load as separate layers in Photoshop.
3. This (unsurprisingly) opened the files as a single .psd with all the images on different layers - with the newest image being at the bottom.
4. I clicked on Timeline and then selected Create video timeline which put all of the clips into the same 5 second space on my time line.
5. I selected all of the images and then by clicking on the small filmstrip icon I selected "New Video group from clips"
So What I am left with is a sequence of all 82 images but with the following problems.
1. All of the clips are 5 seconds long and I want them to be about 1/10 of a second.
2. For some reason the files in the video clip show the most recent first and the oldest last - I would like them the other way round.
I know that I can select all of the clips and then move the play head to approx 1/10 of a second and split the clips. This works except I have to go through and manually delete the bits I don't want which is tedious enough for a video with 82 images but I am planning on longer projects, doing it manually would be a nightmare. Also I could probably re-order the images manually but I am sure that there must be an easier.
I PMed someone for creating my logo for a FM station project.
I want to add the letter KAPY & the numbers 91.7 to this image to create a logo for a Community Radio Station.
So I assue I need to create a layer to would contain the letters & numbers, correct?
I have already installed the correct font in windows, I will be using.
how to do sequential numbering in CorelDraw or is it even possible? From time to time we are required to produce items that have sequential numbering, say, from 1 to 200 for example. If it were only "one set" that would be no problem, but when it is 5, 10 or more sets then it is very time consuming.
View 5 Replies View RelatedFor a University project I'm animating a custom CAT rig on an elephant; I was wondering if there is a way I can make a set of sequential images, or a video maybe, as the background so that when I scroll through the timeline the background video plays too.
View 1 Replies View RelatedAfter animating a scene from frame -45 to +45, I looked at the sequence of files in their folder and it goes like 0000, 0001, -001, 0002, -002, etc. Is there a way to get these in a sequence starting from -45 --> 0 --> +45?
View 2 Replies View Relatedi'm new in Smoke, and in the first time i'm learning the conform and editing tools,one thing i'm looking for is how to sequential rename my shots in the timeline, i found this article in the forum but it's for the 2012 and i didn't found this tool in the 2013 version. URL....
View 2 Replies View Relatedhow to generate serialized barcodes with CorelDRAW X6? I need to be able to give it a starting number and range and have the barcodes generated automatically on different pages to then be printed using imposition printing.
View 4 Replies View RelatedWe are experiencing an almost virus-like situation with some of our dwg files. Massive file sizes that grow exponentially - even with very few entities and no xrefernces. Said files also have issues with copy-to-clipboard and paste from one dwg file to the next: objects do not paste, but dozens of sequentailly named phantom blocks are generated.
After doing some searching around we feel this is occurring when clients send us files exported from microstation.
Any patch or purge command that will fix this?
I'd like to create a part number generator using iLogic. The rule would run as follows:
If the iProperty "Part Number" was not blank or the same as the file name (as Inventor default), then a question box would pop up asking if you would like to overwrite the part number. If one were to select yes, then the following would happen.
iLogic would open an xls that is on the network. The xls would have two columns. Column A would be the part number, B would be the filename associated with that part number.
Column A (the part number) is a sequential count in the form of 6 or seven digits. The format would be something like =TEXT(ROW(A1),"JFRC-000000")
Everytime the part number generator rule is triggered, it would create a new part number on the next blank row, copy this part number to the Part Number iProperty and assign the file in which the iLogic rule was executed to column B in the xls, save and close.
If, when the rule is triggered, the Part Number property is blank or the same as the file name, the user would not be asked if they would like to overwrite the part number. This rule would be triggered manually from a form.
I have an image I need to place in another image. I cannot work out how to do this. If I open them both up.
View 2 Replies View Related