After animating a scene from frame -45 to +45, I looked at the sequence of files in their folder and it goes like 0000, 0001, -001, 0002, -002, etc. Is there a way to get these in a sequence starting from -45 --> 0 --> +45?
View 2 Replies
We are experiencing an almost virus-like situation with some of our dwg files. Massive file sizes that grow exponentially - even with very few entities and no xrefernces. Said files also have issues with copy-to-clipboard and paste from one dwg file to the next: objects do not paste, but dozens of sequentailly named phantom blocks are generated.
After doing some searching around we feel this is occurring when clients send us files exported from microstation.
Any patch or purge command that will fix this?
I have a sequence that's 2 and a half minutes long, but my final edit is 2 minutes. I want to change the duration to 2:05 so I can export out various versions.
View 1 Replies View RelatedAfter selecting 2 (or more) files and right clicking and choosing Multi camera sequence from source, I drag the newly created sequence on to the time line but all I get is the two files on the time line stacked over one another. the sequence never gets created.
View 3 Replies View RelatedWhen I try and open images using image sequence, it does not open all the consecutively numbered files. It only opens about half of them 471 or 873. Why is this? I have copied the files, batch renmaed a few times, and still it does not open all 873. I can tell this by the short length and when I go to export it only says "files up to 471" and it is not the entire folder.
View 7 Replies View RelatedIs it possible to change the settings of red files that exists in a sequence?
I've tried altering the red import settings of a sequence that contained the same clip cut up and a sequence that contained red files and non-red files, but the change seem to only work on the original clips.
I have a huge series of PNG images (name 1, name 2 ...) and I want to import them individually not as a sequence. I also like to set them to a specific length, if possible.
View 3 Replies View RelatedMy assistant and I are working on 2 different computers tied to a server. We need to be able to pass sequences back and forth. Unfortunately, Premiere seems to be adding the associated media files with each sequence import. Our project has fast become a mess of duplicate media. Also, I noticed this "new feature" listed on the Adobe site: An option has been added to not consolidate duplicates on import.Will this fix this problem?
View 6 Replies View Relatedhow to do sequential numbering in CorelDraw or is it even possible? From time to time we are required to produce items that have sequential numbering, say, from 1 to 200 for example. If it were only "one set" that would be no problem, but when it is 5, 10 or more sets then it is very time consuming.
View 5 Replies View RelatedFor a University project I'm animating a custom CAT rig on an elephant; I was wondering if there is a way I can make a set of sequential images, or a video maybe, as the background so that when I scroll through the timeline the background video plays too.
View 1 Replies View RelatedOn my website below (link at bottom), I have all my photos watermarked for obvious reasons,this is done by a normal batch convert action using CS2,the gallery is actually a modified Photoshop "Simple" type of thing.
All of the information you see on the image is actually part of it except for the image number,which is put there by your browser.What I'd like to be able to do is have that image number actually as part of the image and NOT seperate,so if someone saves it they still have that number visible.
Now I can do this manually,but I'd have to increment it by 1 every time by hand,and then copy & paste it onto the resized image by hand,which will take a long,long time.
Is there any way I can get PS to do this automatically for me,so I either specify the starting number,or it actually takes the file name (minus the extension,so no JPEG etc after it)and adds this text to the watermark layer while I put the kettle on?
I am on a project of making 12,500 tickets and so far, I'm at 500 out of 12,500 .. I was just wondering if Photoshop or other Adobe programs can Add Sequential Numbers on a particular area ON a picture,
Example: (this is what i 'm doing, i'm doing it manually, saving it one by one.. and it is taking some time, it's been 2 days already)
then..
and..
and repeat the process again ..
there.. i've tried using recording Action. How to use script, (if i have to use script, can you instruct me on a step-by-step procedure or atleast pinpoint me to a thread that explains it, because the ticket's deadline is on May 4th, and again i have 12,500 tickets to make)
also the way that i print this is first as you can see saving it one by one as .jpeg and selecting 9 of the .jpeg files, right click, then print as wallet size, for it to fit in a 8.5 / 11 paper.. there..
I have just started to try something using video in CS6. I have 82 sequential images and I am trying to string them together as a sort of stop motion film (think the intro to the Monkeys). I have done the following:
1. Opened Bridge and selected all of the images
2. From the tools menu I selected the Photoshop sub-menu and then selected load as separate layers in Photoshop.
3. This (unsurprisingly) opened the files as a single .psd with all the images on different layers - with the newest image being at the bottom.
4. I clicked on Timeline and then selected Create video timeline which put all of the clips into the same 5 second space on my time line.
5. I selected all of the images and then by clicking on the small filmstrip icon I selected "New Video group from clips"
So What I am left with is a sequence of all 82 images but with the following problems.
1. All of the clips are 5 seconds long and I want them to be about 1/10 of a second.
2. For some reason the files in the video clip show the most recent first and the oldest last - I would like them the other way round.
I know that I can select all of the clips and then move the play head to approx 1/10 of a second and split the clips. This works except I have to go through and manually delete the bits I don't want which is tedious enough for a video with 82 images but I am planning on longer projects, doing it manually would be a nightmare. Also I could probably re-order the images manually but I am sure that there must be an easier.
I've been given the task of numbering our blueprint files (.tif format). I need to add around 800 ballooned numbers to each drawing at specific locations. These are just numbers with a circle around it.
Currently, I'm manually adding the number as text and then drawing a circle around it, then the next number, another circle etc.
How to show the sequential numbers on the steps of stair?
I’m wondering if there is a way to show the sequential number on the steps of stair.
Also, we are all the time required to write the number of stairs, run length and rise length on the drawing. Is this possible in the Revit?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
i'm new in Smoke, and in the first time i'm learning the conform and editing tools,one thing i'm looking for is how to sequential rename my shots in the timeline, i found this article in the forum but it's for the 2012 and i didn't found this tool in the 2013 version. URL....
View 2 Replies View RelatedI am curently working on a larger projekt, where we have aprox. 4500 pcs.of furnituer designed in 4 different kind of families, generic, furnituer, furnituer systems and specialty equipment. We need to be able to asign every pcs.of funituer a seqventual serial number, we have tried to do this using an extension with a funktion called element positionerning, but we have had no success with this tool, apparently it is taking up to much memory.
View 2 Replies View Relatedhow to generate serialized barcodes with CorelDRAW X6? I need to be able to give it a starting number and range and have the barcodes generated automatically on different pages to then be printed using imposition printing.
View 4 Replies View RelatedI'd like to create a part number generator using iLogic. The rule would run as follows:
If the iProperty "Part Number" was not blank or the same as the file name (as Inventor default), then a question box would pop up asking if you would like to overwrite the part number. If one were to select yes, then the following would happen.
iLogic would open an xls that is on the network. The xls would have two columns. Column A would be the part number, B would be the filename associated with that part number.
Column A (the part number) is a sequential count in the form of 6 or seven digits. The format would be something like =TEXT(ROW(A1),"JFRC-000000")
Everytime the part number generator rule is triggered, it would create a new part number on the next blank row, copy this part number to the Part Number iProperty and assign the file in which the iLogic rule was executed to column B in the xls, save and close.
If, when the rule is triggered, the Part Number property is blank or the same as the file name, the user would not be asked if they would like to overwrite the part number. This rule would be triggered manually from a form.
I have a large job for a client who uses antique computers. They are so old that he can't run Lightroom. As a workaround, I posted the images I wanted him to look at on SmugMug and we had a disaster. Their sequencing on screen does not match my "as shot" sorting on my Lightroom (4). Is there a way I can print sequential serial numbers/ids on my images before I upload them to SmugMug so we are always talking about the same image?
View 6 Replies View RelatedI am currently using a Nikon D7100 and recording my photos in the Raw/NEF-RAW format. Recently, whenever I am uploading my photos to Lightroom 5, my photos are changing to .dng files rather than staying in the NEF file. When I go and look back at my previous imports from the past few times, they are in NEF and NOT in .dng. Why is this doing this and how do I turn this feature off so that my files remain the same going from my camera to my computer through importation.
View 1 Replies View RelatedI currently have a LISP routine that will replace the value of a specific attribute name with sequential numbers in the order that the blocks are selected. Like TCOUNT for attributes - and it only looks for a specific attribute Tag Name called "ID".
However, what I want it to do now, instead of just putting the number into the attribute value, I want the number to be a suffix to the existing default tag value of the tag named "ID" which is "ADDRESS:" for some blocks and "ELEVATION:" for other blocks but the tag name that the routine always has to filter for is "ID". That way the user can pick anywhere on the block - not being forced to pick the tag we want to add numbers to.
What I need the new LISP to do is append a space and then a number to the existing tag value in the block, so that the result would look like "ADDRESS: 1", "ADDRESS: 2", "ADDRESS 3" or "ELEVATION: 1", ELEVATION: 2", etc. depending on whatever the default value for the tag "ID" is.
there are several hundred different block names - but they all have a Tag Name of "ID" - whose default value is sometimes "ADDRESS:" and sometimes "ELEVATION:".
So I managed to have a fatal two disk crash and almost lost half of my catalogue. Luckily, I recovered one of the drives, but it renamed all of my files. I was using original file names (dumb mistake), and it seems there is no way to recover them. In the future I will be using YYYYMMDD-HHMMSS to keep things recoverable.
So at the moment I have recovered and renamed the files along those lines (YYYYMMDD-HHMMSS). What I want to do is rename the links in the catalogue to match as the files have that exif data, and then I think I can recover the files. Of course, Lightroom is throwing up roadblocks. I'd like to recover the photos with their edits, so is there a way to rename the files in the catalogue to match my new files?
My RAW files look great in bridge, but when I open or save them, they are somehow changing properties. The exposure increase and they become blown out and more yellow? This just started out of the blue yesterday.
View 16 Replies View RelatedWe have about 1000 drawings with VBA code that copies information from the title block into the drawing file custom properties. We have done this to get the information into a ACAD block to meet our clients requirements. It is an autosave routine so it runs whenever the file is saved in Inventor. We would like to make a change to the VBA code so we need to replace the autosave routine in the file with another.
Manual steps are:
Open the file
Enter VBA editor
Delete the autosave routine (without exporting)
Import the new autosave routine
Exit the VBA editor
Save and close the file
I'm sure we would write a routine to do this. However the effort from scratch may be more that just manually processing the files.
Currently running IV 2010.
I have about 300+ product labels that are in Illustrator, and some of them have an incorrect rich black color swatch. What I have been doing is going through and changing the color pallette to change them manually. Essentially going to the instance of black and changing them to regular black.
Is there any sort of script that can do this? The files are in CMYK.
Otherwise I have a lot of monotonous file editing to do.
I have about 500 files that I need to change one line of text in. Example. File name is XXX 001, the line of text is the file name so it would read XXX 001. XXX 002... etc. up to XXX 500. Is there a way that I could automate it opening, changing this line of text, saving and closing?
View 1 Replies View RelatedWe just installed the new version of 2012 Product Design Suite. I've spend many hours creating great little ilogic dialog boxes to populate iproperty fields using custom iproperties and then automatically place this data on the .idw file when the view is placed on the new drawing. All works great when the part is created with my new 2012 part template and then placed on my new 2012 idw template. The trouble is with parts that were created with 2011 Inventor. Obviously, the old template does not have the ilogic data built into it. Is there a way to upgrade/migrate the part template file from 2011 to 2012 on an existing part?
I think I'm asking for a miracle here, but I have an assembly with 40-50 parts that I created in 2011 and now need to build the idw files for them and would really like to be able have the customized iproperties added to the existing part files.
I am changing computers, how I can move the development info with my master files?
View 1 Replies View RelatedI'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View RelatedThe attached files are two sprockets. The original part has 30 teeth. I need 34 teeth.
The MODIFIED part has one of my attempts at making 34 teeth. I have tried the following with the same error dialog box (see below):
1. Edit Sketch_6 (associated with Extrusion1) by deleting all but one of the teeth lines (2 arcs and 2 lines that make up a tooth) and making a circular pattern of 34.
2. Same circular pattern, except this time I "Close the Loop" (right-click on one of the teeth line segments > Close Loop > click on all the segments until the loop is closed).
3. Same circular pattern, except this time change the resulting patterned lines into construction lines, trace these lines with arcs and lines of my own (not construction lines), and close the loop on my own lines.
When each of the 3 attempts failed, I tried deleting Extrusion1 and making a new Extrusion feature from Sketch_6. I cannot select what I want in Sketch_6 in order to make the teeth.
I'm at the point where I'm just going to take the dimensions from the circular pattern sketch of 34 teeth, delete Extrusion1 and Sketch_6, and make my own sketch and extrusion.
For the future, I really would like to know - why is it so difficult to alter features like this? Yes, I understand that Sketch_6 is not fully constrained, and on top of this I am not privy to how it was generated in the first place (this is a part file from a vendor). But it does not strike me as something overly complicated for the Extrusion feature to recognize a change in its associated sketch. This is not the first time I have encountered something like this.
