Adobe says, that you can select a group of frames, edit 1 frame from the group, and it will apply that for the rest of them. In order to do this, it says have one frame selected, the Shift-click another one. I had a frame selected, and then I shift-clicked another. Nothing is highlighting.
View 10 RepliesI draw images by hand and scan them into photoshop to touch them up with the wacom tablet. Often I'll want to take a piece of the drawing and rotate it, stretch it out, or move it. I select the piece, take the move tool (v) and do what I need to do. I then either press enter and move the piece, or I move it before pressing enter and applying the transformation.
Either way, what often happens is that the piece doesn't deselect, and I can't move it or alter it further in any way. After this happens, I also can't switch between layers, or I can, but what's on the canvas doesn't respond at all. I can still save, and select different tools in the program, but I can't work on anything. Also it might be relevant that I'm working with the frame animation window, and these drawings occupy layers that I'm using as animation frames. Selecting different animation frames also gives no response.
The only thing that works is to save what I'm working on and restart the program. Half the time this problem doesn't occur, but since I'm performing these actions a lot, it really slows me down. Photoshop works fine otherwise it's just this one thing that's bugging me.
My system specs:
Processor: AMD FX(tm)-6100 Six-Core Processor 3.30 GHz
Ram: 8 GB
64 bit operating system
Graphics: AMD Radeon HD 6670
I am trying to move my sig layers which are just a jpg into the correct position, I also have a gif image which is not visible as it is hidden behind the layers. When I move some layers it does not move it on all the other frames (the frames are there cos of the gif file so they each are seperate).
Does anyone know how I what options or what tool do i select to move the layers in all the keyframes to the position i want?
I'll try and get a screen capture if u dont understand
P & G D 2013
when photo frames are opened in the gallery, each style has the 4 options, but when dragged across all four come over and not the one required. This is for simple adding of a photo in frame to a page.
I want to select all text frames on all visible layers. The script below will select all text frames even in groups but when a layer with text on it is invisible the script will error.(target layer cannot be modified)
if (app.documents.length > 0 ) {
var doc = app.activeDocument;
var numTextFrames = 0;
for ( i = 0; i < doc.textFrames.length; i++ ) {
textArtRange = doc.textFrames[i];
textArtRange.selected = true;
}
}
So I made this script to select text frames on only the visible layers but it now misses text that is in a group.
var layerCount = activeDocument.layers.length;
var docSelected = activeDocument.selection;
for (i = 0; i < layerCount; i++)
[Code] .....
Why it does not selected textframes in a group when done this way and is there a way to get all textframes selected on all visible layers?
I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
Been combing over the interent to try to figure out how to (in CS6 PS) get multiple gif to load onto the same static image that have different amount of frames, thus far I have my two gifs (on opposite sides) on the image and a short title video in the center but it starts with all three images and then runs the two gif until the the first (8 frames) runs out then the remainder of the second runs out at 13 frames and lastly the rest of the video plays each frame.
My goal is to get the video to just play naturally in the center and each gif on the sides to play on a loop as I want the entire image to be a banner for a website.
Win7 64 bit
CS6 photoshop
Gif1 = 8 frames/layers
Gif2 = 13 frames/layers
video = 96 frames/layers (also it is set at a very low resolution and is just a title with a second title transitioning in)
On a certain number of frames I want "hi" and on another number I want "bye" But the first text is on all the other frames.
View 2 Replies View Related'm using PS 3 Extended 10.0. I've imported video from Premiere & I would like to edit each frame in exactly the same way. I'd like to use the eraser tool to erase almost everything in the frames. I can do this 1 frame at a time, but there are 160 frames so it would take too long. Also, I want the erasure of each frame to be the same, & if I do it 1 frame at a time, each one will be slightly different. How can I make a uniform erasure of all 160 frames at the same time? I treid using the "actions" command, but it didn't work.
View 1 Replies View Relatedis there any way to use a single filter on several frames (imageready) or at least on several layers...
View 5 Replies View Relatedis there a way that i can move/ multiple layers at the same time?
View 2 Replies View RelatedI'm trying to select multiple layers in the layers panel on a Mac. I normally do 'command-click' and it works to select many layers. Now, it doesn't work. When I click the second layer, it draws a marquee around it. I need to select multiple layers in order to drop shadow many layers at the same time.
View 3 Replies View Relatedquestion regarding selecting multple parts of an image.
I have a landscape picture that I want to divide up into 5 parts.
I have managed to achieve the effect by using Image Ready and creating 5 seperate slices, then selecting these 5 slices, converting them to a selection, the cutting and pasting the selection to a new file. The trouble with doing this is that I have to create the slices every time for a new picture, and as I will be doing this type of work a lot, I would like to be able to call up the same selection or mask every time I work on a similar picture.
Is there a way I can save the selection mask, or slices, then recall them and apply it to the picture.
How do I edit multiple layers or frames?
I am working on a GIF and I want to change the brightness, saturation settings etc but it seems that I have to edit the frames one by one, which is extremely tedious. Is there a faster way to do this?
Select one type layer, as you can see below, the character panel reflects the setting correctly:
Select TWO type layers, with the exact same character attributes.. what happens?
It should say in the image above 36px/52px, not 12.16px (.16 px? Really?) and 17.56.I haven't the foggiest idea where that even comes from.
But the result for all photoshop users is that they have to individually change all the layers individually..I was hoping character styles would work, i have yet to figure out how it even works, i've tried multiple times, it just doesn't do anything to the selected type.
I've just applied the complimentary PSE 10 to PSE 11 upgrade.All appeared to work fine. However I seem to have a problem when trying to select Media to view via Tags.If I select a Tag, the required media (photos) are displayed as expected, however if I then select a 2nd Tag all thumbnails vanish and there is a "message" : No media to be displayed.
The problem appears to be a simple case of not allowing multiple tags to be selected? This worked (and still does) in PSE10. It should be possible to display media by selecting multiple Tags but doesn't show a specific example ! I don't see any "Preference" that prevents multiple Tag displays.
Is this a bug or a PSE11 "enhancement" ? My setup is Win 7 Pro 64bit
I am working on a water line replacement job in a residential neighborhood. Some of the streets are getting the water line replaced and some are not. I have created an alignment for the water line on the streets that are being replaced.
When I create my view frame group along each alignment, there are some overlapping view frames from different alignments. I need to create a matchline for these instances. How to create matchlines for view frames on different alignments? Or create one view frame group from different alignments?
If a want one assembly with, lets say, 2 steelframe cases made with frame generator, and I want to have a piece of wood between them and I want to edit the position of the cases and the thickness of the wood. Then I need to do the frame generating in 2 separate assemblies and bring them together in a mother assembly?
View 2 Replies View RelatedI have found this post from April where the bug was acknowledged in the beta:
[URL].........
I now have the official release of CS6, and I am still seeing this issue. And for clarification, here's what the issue is:
- I start off creating a text layer with a font size of 20px.
- I then transform this layer to make it larger.
- I copy the layer over so I have identical text layers.
- When I select each individually, I am shown the new, larger font size, we'll just say 40px. But when I select both together, it shows the original font size of 20px in the character palette. When I increase the font size with both selected to say 30px, it actually makes the text more like 60px.
Will this bug actually get fixed?
I have a problem:
Movie > Create From Document > Insert From File > select multiple images and click OK = crash
Very sad. Because I have to insert over 100 frames and doing it one by one.
PP X5 SP3, Windows 7.
I would like to find out if it is possible to produce a drawing with more than one view frame plotted on a single sheet/layout. I was thinking of minimizing on the number of sheets used for Linear features.
View 2 Replies View RelatedI've just upgraded to Corel X5 and cannot find a way of selecting more than one layer at a time in the Object Manager docker. (With X3 I simply held down Shift and selected however many layers I wanted). I sometimes need to select dozens of layers at once to delete them or switch off visibility - surely not one at a time? How is this done in X5?
View 14 Replies View RelatedWhat needs correcting to enable me to select multiple files using Shift key? It isn't working for me.
View 5 Replies View RelatedIs it possible to create multiple frames in a single assembly environment? (i.e. Frame0001, Frame0002)
The members all lump together in one Frame regardless of when they are created in the workflow.
I know there is a workaround for this by making each frame in its own assembly...but that will be more cumbersome than it is worth in this application.
Right now I have just created folders in the Frame0001 to sort things out, but the folders are not very flexible as far as moving things in and out or reordering...it is a pain.
I've used the Frame generator to create my existing building columns, existing platform columns, and existing handrail. I'll be using the frame generator pretty soon here to build a new platform, which I would love to keep separate from the existing steel.
I suppose I could save the current assembly and insert it into a new one so I can add the new equipment, but I'd rather avoid large subassemblies like that. Seems like it would be a lot easier to just have an option to create Frame0002.
(Inventor Professional 2014 Update 1, Windows 7 Professional)
Is it possible to select entities of multiple layers?
I've looked at... [URL] .....
...and tried the following code.
string[] layerNames = {"1", "2", "3"};TypedValue[] tdv = new TypedValue[(layerNames.Length * 3) + 2];int i = 0;tdv[i++] = new TypedValue((int)DxfCode.Operator, "<or");foreach (string ln in layerNames){ tdv[i] = new TypedValue((int)DxfCode.Operator, "<and"); tdv[i + 1] = new TypedValue((int)DxfCode.LayerName, ln); tdv[i + 2] = new TypedValue((int)DxfCode.Operator, "and>"); i += 3;}tdv[i - 2] = new TypedValue((int)DxfCode.Operator, "or>");SelectionFilter sf = new SelectionFilter(tdv);PromptSelectionResult psr = ed.SelectAll(sf);
This code gives me an error in the PromptSelectionResult.
What would cause the erro?
I have a problem with selecting multiple objects!!! Everywhere it says that you have to hold shift and select the objects you wish but when I do this it selects all the objects in between! How can I change this?
View 4 Replies View RelatedI'm using QSELECT to select all objects on a layer, sometimes I need to select objects from 5-7 layers.
Right now I use QSELECT, select 1 layer, click OK, open QSELECT again, select another layer and repeat. Is there a faster way to do this without scripts?
I'm sure some of you do site drawings, how do you measure a curve? Some restaurants or cafes have a rounded serving counter, how you measure the radius to plot into autocad?
I want to move a few snap points on a line but not all of them... Usually I would shift + click each individual snap point and then move but when I have a lot of points it gets pretty time consuming.
If there was a way to drag select multiple snap points in a line.
I have created some shapes within a circle and have used Pathfinder to divide the shapes up and have then deleted some.
With the remaining shapes, I want to change the location of some of the adjacent shape boundaries.
I can do this by dragging across some anchor points with the direct selection tool and can then select the anchor point (for both shape boundaries) to move both lines/boundaries together.
HOWEVER, if I want to change the angle of the boundaries by selecting the handles, it seems I can only select the top anchor moving one of the boundaries and not the other thereby separating the lines?
How I can select multiple handles (that should be on top of each other)?
What is the correct technique for selecting paths with multiple strokes of the same colours?
Select Same doesn’t seem to work properly since it only selects one of the stroke colours.
I have several paths with the same stroke colour makeup yet they don’t behave as if they have the same appearance, depending on which of a path’s several strokes is selected in the Appearance panel.
If i try to select more than a row or the entire column indesign crash and quit. exported to cs6 and opened it works perfectly. URL....
View 25 Replies View Related